[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problem to send DB characters - Remove Escape characters



   Gilles,
   My integration test found an error for elements with no data. For these
   elements the following messages showed up in the job log and the HTTP
   API debug log:
   Job log:
   --------
   The length requested for storage allocation is out of range.
   Failed unmarshalling value '*N' of field '*N'.
   HTTP API debug log:
   -------------------
   WSDL2RPG: call stack frames:
   Program      Library      Act.Group    Statement    Procedure
   QCMD         QSYS         *DFTACTGRP        /04F8
   START#RZ     RADDATZ      *DFTACTGRP                _CL_PEP
   START#RZ     RADDATZ      *DFTACTGRP   6000         START#RZ
   QUOCPP       QPDA         *DFTACTGRP        /079D
   QUOMAIN      QPDA         *DFTACTGRP        /1139
   QUOCMD       QSYS         *DFTACTGRP        /03B3
   WSDLIPMR17   RADDATZ      *NEW
   _QRNP_PEP_WSDLIPMR17
   WSDLIPMR17   RADDATZ      *NEW         37600        WSDLIPMR17
   WSDLIPMR17   RADDATZ      *NEW         178700       MAIN
   WSDLIPMR17   RADDATZ      *NEW         159000
   FARMACLICK2005001FCKRICHIESTADOCUMENTO_FCKRICHIESTADOCUMENTO
   PMR017A      RADDATZ      *NEW         728
   Farmaclick2005001FCKRichiestaDocumento_FCKRichiestaDocumento
   WSDL2RPGRT   RADDATZ      *NEW         354200
   WSDL2R98_Marshaller_toStringV6
   WSDL2RPGRT   RADDATZ      *NEW         35200
   WSDL2R90_AppMsg_sendEscMsgAndDump
   WSDL2RPGRT   RADDATZ      *NEW         39300
   WSDL2R71_http_DebugLog_dumpCallStack
   WSDL2RPGRT   RADDATZ      *NEW         20200
   WSDL2R80_CallStack_dump
   WSDL2RPG: USR5023: Failed unmarshalling value '*N' of field '*N'.
                      Cause . . . . . :   The following error message
   prevented the value of field '*N' from being retrieved from XPath
   '*N/*N'. Message text  . :   The length requested for storage
   allocation is out of range.
             received from procedure: BASICS1R1_f_sndPgmMsg
                       and statement: 54400
   ** 2013-07-04-11.49.56.091000: Leaving
   Farmaclick2005001FCKRichiestaDocumento_FCKRichiestaDocumento()
   Since your debug log is empty, there must be a different problem on
   your side. Nevertheless, you should replace WSDL2R98 with the attached
   member.
   Did you have time to debug WSDL2R98 at your side? What is the result?
   Regards,
   Thomas.
   ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 03.07.2013 22:44:22:
   > Von: thomas.raddatz@xxxxxxxxxxx
   > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > Datum: 03.07.2013 22:59
   > Betreff: Re: Problem to send DB characters - Remove Escape characters
   > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   >
   > Gilles,
   >
   > It is hard to believe that it does not work for you. It is true that
   I did
   > not run a complete integration test but I tested the new
   functionality with
   > an extensive RPGUnit test. The procedures I tested are:
   >
   >     Marshaller_toString()
   >     Marshaller_toStringV6()
   >     XmlEntityEncoder_encode()
   >     XmlEntityEncoder_encodeLarge()
   >     XmlEntityEncoder_encodeV6()
   >
   > May you please start the debugger for service program WSDL2RPGRT and
   module
   > WSDL2R98 and add a breakpoint to the marshaller that your stub uses.
   For
   > example, starting at Marshaller_toString(), the program flow is like
   this:
   >
   >     Marshaller_toString()
   >     -> encodeXmlEntityToFieldV6() // adapter procedure
   >        -> encodeXmlEntityToStream()
   >           -> GenericStream_write()
   >
   > And for the V6 counterpart it is:
   >
   >     Marshaller_toStringV6()
   >        -> encodeXmlEntityToStream()
   >           -> GenericStream_write()
   >
   > So if the entity encoder is disabled the program should go through
   > encodeXmlEntityToStream() in both cases. From
   encodeXmlEntityToStream() it
   > should directly call GenericStream_write() without going through
   > encodeXmlEntityToStreamInternally().
   >
   > GenericStream_write() either writes the data to the output field or
   for the
   > new V6 procedures directly appends the data to a
   "ManagedMemoryDataSource".
   >
   > For the "old" non V6 procedures the data of the output field is
   indirectly
   > appended to a "ManagedMemoryDataSource". First it is returned to the
   stub
   > module and added to the "request" field. Then the "request" field is
   > periodically appended to the "ManagedMemoryDataSource".
   >
   > Eventually the data of the "ManagedMemoryDataSource" is passed as
   POST data
   > to HTTPAPI. That is easier than it first appears to be. Just as a
   side note
   > the "ManagedMemoryDataSource" is a combined memory and IFS file
   buffer. It
   > uses the memory buffer as long as there is memory available. As soon
   as
   > there is no more memory left, it switches to the slower file buffer.
   That
   > way there is no limit for the POST data.
   >
   > Important to know: You do not need to look at the
   > "ManagedMemoryDataSource". I told you about it, to let you know, how
   your
   > input data flows from the input data structure through the
   Marshallers, the
   > Xml entity encoder and the "ManagedMemoryDataSource" until it ends up
   as
   > the POST data in HTTP API.
   >
   > So if your data goes through GenericStream_write(), it must be added
   to the
   > POST data of your request message.
   >
   > I am going to run my complete test suite tomorrow and for sure I let
   you
   > know the result.
   >
   > Regards,
   >
   > Thomas.
   >
   >
   >
   > Am 03.07.2013 15:17, schrieb gilles.renne@xxxxxxxxxxxxxxxxx:
   > >     Hi
   > >     i receive Bad request  now
   > >     and i have nothing in httpapi_debug file
   > >     regards
   > >     Gilles Renne
   > >     Inactive hide details for ftpapi-request---02/07/2013
   > >     13:45:29---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >     ftpapi-request---02/07/2013
   > >     13:45:29---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >
   > >     ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >         Envoyé par : ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >         02/07/2013 13:14
   > >
   > >
   > >              Veuillez répondre à
   > >         ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >
   > >
   > >     A
   > >
   > >          ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >
   > >     cc
   > >
   > >     Objet
   > >
   > >          Ftpapi Digest, Vol 81, Issue 4
   > >
   > >     Réf.
   > >
   > >     Send Ftpapi mailing list submissions to
   > >     ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     To subscribe or unsubscribe via the World Wide Web, visit
   > >     [1][1]http://scottklement.com/mailman/listinfo/ftpapi
   > >     or, via email, send a message with subject or body 'help' to
   > >     ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >     You can reach the person managing the list at
   > >     ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
   > >     When replying, please edit your Subject line so it is more
   specific
   > >     than "Re: Contents of Ftpapi digest..."
   > >     Today's Topics:
   > >       1. RE Ftpapi Digest, Vol 81, Issue 3
   (gilles.renne@xxxxxxxxxxxxxxxxx)
   > >       2. Re: RE Ftpapi Digest, Vol 81, Issue 3
   (thomas.raddatz@xxxxxx)
   > >
   ----------------------------------------------------------------------
   > >     Message: 1
   > >     Date: Tue, 2 Jul 2013 12:56:21 +0200
   > >     From: gilles.renne@xxxxxxxxxxxxxxxxx
   > >     To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     Cc: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     Subject: RE Ftpapi Digest, Vol 81, Issue 3
   > >     Message-ID:
   > >
   <OF58795E0F.39BA6186-ONC1257B9C.003BEBEC-C1257B9C.003C1783@LocalDomain>
   > >     Content-Type: text/plain; charset="iso-8859-1"
   > >     hi
   > >     i have a compilation error
   > >     USR50203 is not find
   > >     regards
   > >     Gilles Renne
   > >
   > >
   > >                 ftpapi-request@li
   > >
   > >                 sts.scottklement.
   > >
   > >                 com
   > >     A
   > >                 Envoy? par :
   ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >
   > >                 ftpapi-bounces@li
   > >     cc
   > >                 sts.scottklement.
   > >
   > >                 com
   > >     Objet
   > >                                           Ftpapi Digest, Vol 81,
   Issue 3
   > >
   > >
   > >     R?f.
   > >                 02/07/2013 11:12
   > >
   > >
   > >
   > >
   > >
   > >                 Veuillez r?pondre
   > >
   > >                         ?
   > >
   > >                 ftpapi@xxxxxxxxxx
   > >
   > >                   tklement.com
   > >
   > >
   > >
   > >
   > >
   > >     Send Ftpapi mailing list submissions to
   > >      ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     To subscribe or unsubscribe via the World Wide Web, visit
   > >      [2][2]http://scottklement.com/mailman/listinfo/ftpapi
   > >     or, via email, send a message with subject or body 'help' to
   > >      ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >     You can reach the person managing the list at
   > >      ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
   > >     When replying, please edit your Subject line so it is more
   specific
   > >     than "Re: Contents of Ftpapi digest..."
   > >     Today's Topics:
   > >       1. Re: Problem to send DB characters - Remove Escape
   characters
   > >          (thomas.raddatz@xxxxxx)
   > >
   ----------------------------------------------------------------------
   > >     Message: 1
   > >     Date: Tue, 2 Jul 2013 11:12:41 +0200
   > >     From: thomas.raddatz@xxxxxx
   > >     To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     Subject: Re: Problem to send DB characters - Remove Escape
   characters
   > >     Message-ID:
   > >
   <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
   > >     Content-Type: text/plain; charset="us-ascii"
   > >     Gilles,
   > >     I added some procedures to module WSDL2R98 of service program
   > >     WSDL2RPGRT
   > >     to control the integrated XML entity encoder. Replace the
   existing
   > >     source
   > >     members and reinstall WSDL2RPG if you want to use the new
   procedures:
   > >      //  Enables/disables the integrated XML entity encode.
   > >      XmlEntityEncoder_setEnabled(isEnabled)
   > >      //  Returns the enabled status of the integrated XML entity
   encoder.
   > >      isEnabled = XmlEntityEncoder_isEnabled()
   > >      //  Encodes XML entities up to 64k (V5R4 and lower).
   > >      encoded = XmlEntityEncoder_encode(i_value)
   > >      //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >      encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >      //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >      XmlEntityEncoder_encodeV6(
   > >         i_value: %addr(encoded): %addr(encoded: *DATA):
   %size(encoded));
   > >     Regards,
   > >     Thomas.
   > >     ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   14:33:34:
   > >     > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >     > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     > Datum: 01.07.2013 14:41
   > >     > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >     > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     >
   > >     >
   > >     > Hi,
   > >     >
   > >     > I try to send chineese characters like
   > >     >
   > >     > when i view this on Iseries
   > >     > i see
   > >     >
   > >     >
   > >     >
   > >     > So chineese characters 5075
   > >     >
   > >     > has a & , then this characters is remove for escape
   characters
   > >     function
   > >     > ( XmlEntityEncoder_encodeToStream)
   > >     >
   > >     > and then after the i_conv  function is wrong because a db
   character
   > >     lost
   > >     > one hexa decimal value.
   > >     >
   > >     > what can i do do prevent this ?????
   > >     >
   > >     > regards
   > >     >
   > >     > Gilles Renne
   > >     > This message contains confidential information. To know more,
   please
   > >     > click on the following link:
   [3][3]http://disclaimer.bureauveritas.com
   > >     > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >     > [Bild entfernt]
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >     > [4][4]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     --
   > >     IMPORTANT NOTICE:
   > >     This email is confidential, may be legally privileged, and is
   for the
   > >     intended recipient only. Access, disclosure, copying,
   distribution, or
   > >     reliance on any of it by anyone else is prohibited and may be a
   > >     criminal
   > >     offence. Please delete if obtained in error and email
   confirmation to
   > >     the
   > >     sender.
   > >     -------------- next part --------------
   > >       Gilles,
   > >       I added some procedures to module WSDL2R98 of service program
   > >       WSDL2RPGRT to control the integrated XML entity encoder.
   Replace the
   > >       existing source members and reinstall WSDL2RPG if you want to
   use the
   > >       new procedures:
   > >         //  Enables/disables the integrated XML entity encode.
   > >         XmlEntityEncoder_setEnabled(isEnabled)
   > >         //  Returns the enabled status of the integrated XML entity
   > >     encoder.
   > >         isEnabled = XmlEntityEncoder_isEnabled()
   > >         //  Encodes XML entities up to 64k (V5R4 and lower).
   > >         encoded = XmlEntityEncoder_encode(i_value)
   > >         //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >         encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >         //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >         XmlEntityEncoder_encodeV6(
   > >            i_value: %addr(encoded): %addr(encoded: *DATA):
   %size(encoded));
   > >       Regards,
   > >       Thomas.
   > >       ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   14:33:34:
   > >       > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >       > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       > Datum: 01.07.2013 14:41
   > >       > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >       > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       >
   > >       > Hi,
   > >       >
   > >       > I try to send chineese characters like
   > >       >
   > >       > when i view this on Iseries
   > >       > i see
   > >       >
   > >       >
   > >       >
   > >       > So chineese characters 5075
   > >       >
   > >       > has a & , then this characters is remove for escape
   characters
   > >       function
   > >       > ( XmlEntityEncoder_encodeToStream)
   > >       >
   > >       > and then after the i_conv  function is wrong because a db
   character
   > >       lost
   > >       > one hexa decimal value.
   > >       >
   > >       > what can i do do prevent this ?????
   > >       >
   > >       > regards
   > >       >
   > >       > Gilles Renne
   > >       > This message contains confidential information. To know
   more,
   > >     please
   > >       > click on the following link:
   > >     [1][5][5]http://disclaimer.bureauveritas.com
   > >       > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >       > [Bild entfernt]
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >       >
   [2][6][6]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       --
   > >       IMPORTANT NOTICE:
   > >       This email is confidential, may be legally privileged, and is
   for the
   > >       intended recipient only. Access, disclosure, copying,
   distribution,
   > >     or
   > >       reliance on any of it by anyone else is prohibited and may be
   a
   > >       criminal
   > >       offence. Please delete if obtained in error and email
   confirmation to
   > >       the sender.
   > >     References
   > >       1. [7][7]http://disclaimer.bureauveritas.com/
   > >       2. [8][8]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     -------------- next part --------------
   > >     A non-text attachment was scrubbed...
   > >     Name: Patch_XmlEncoder_for_v1.15.5+.zip
   > >     Type: application/zip
   > >     Size: 31638 bytes
   > >     Desc: not available
   > >     URL: <
   > >
   [9][9]http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea
   97d
   > >     e9/attachment.zip
   > >     >
   > >     ------------------------------
   > >
   -----------------------------------------------------------------------
   > >     This is the FTPAPI mailing list digest.  To unsubscribe, go to:
   > >     [10][10]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >
   -----------------------------------------------------------------------
   > >     End of Ftpapi Digest, Vol 81, Issue 3
   > >     *************************************
   > >     This message contains confidential information. To know more,
   please
   > >     click on the following link:
   [11][11]http://disclaimer.bureauveritas.com
   > >     -------------- next part --------------
   > >       hi
   > >       i have a compilation error
   > >       USR50203 is not find
   > >       regards
   > >       Gilles Renne
   > >       Inactive hide details for ftpapi-request---02/07/2013
   > >       11:39:55---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >       ftpapi-request---02/07/2013
   > >       11:39:55---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >       ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >           Envoy? par : ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >           02/07/2013 11:12
   > >                Veuillez r?pondre ?
   > >           ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       A
   > >            ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       cc
   > >       Objet
   > >            Ftpapi Digest, Vol 81, Issue 3
   > >       R?f.
   > >       Send Ftpapi mailing list submissions to
   > >       ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       To subscribe or unsubscribe via the World Wide Web, visit
   > >       [1][12][12]http://scottklement.com/mailman/listinfo/ftpapi
   > >       or, via email, send a message with subject or body 'help' to
   > >       ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >       You can reach the person managing the list at
   > >       ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
   > >       When replying, please edit your Subject line so it is more
   specific
   > >       than "Re: Contents of Ftpapi digest..."
   > >       Today's Topics:
   > >         1. Re: Problem to send DB characters - Remove Escape
   characters
   > >            (thomas.raddatz@xxxxxx)
   > >
   > >
   ----------------------------------------------------------------------
   > >       Message: 1
   > >       Date: Tue, 2 Jul 2013 11:12:41 +0200
   > >       From: thomas.raddatz@xxxxxx
   > >       To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       Subject: Re: Problem to send DB characters - Remove Escape
   characters
   > >       Message-ID:
   > >
   <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
   > >       Content-Type: text/plain; charset="us-ascii"
   > >       Gilles,
   > >       I added some procedures to module WSDL2R98 of service program
   > >       WSDL2RPGRT
   > >       to control the integrated XML entity encoder. Replace the
   existing
   > >       source
   > >       members and reinstall WSDL2RPG if you want to use the new
   procedures:
   > >        //  Enables/disables the integrated XML entity encode.
   > >        XmlEntityEncoder_setEnabled(isEnabled)
   > >        //  Returns the enabled status of the integrated XML entity
   encoder.
   > >        isEnabled = XmlEntityEncoder_isEnabled()
   > >        //  Encodes XML entities up to 64k (V5R4 and lower).
   > >        encoded = XmlEntityEncoder_encode(i_value)
   > >        //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >        encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >        //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >        XmlEntityEncoder_encodeV6(
   > >           i_value: %addr(encoded): %addr(encoded: *DATA):
   %size(encoded));
   > >       Regards,
   > >       Thomas.
   > >       ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   14:33:34:
   > >       > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >       > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       > Datum: 01.07.2013 14:41
   > >       > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >       > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       >
   > >       > Hi,
   > >       >
   > >       > I try to send chineese characters like
   > >       >
   > >       > when i view this on Iseries
   > >       > i see
   > >       >
   > >       >
   > >       >
   > >       > So chineese characters 5075
   > >       >
   > >       > has a & , then this characters is remove for escape
   characters
   > >       function
   > >       > ( XmlEntityEncoder_encodeToStream)
   > >       >
   > >       > and then after the i_conv  function is wrong because a db
   character
   > >       lost
   > >       > one hexa decimal value.
   > >       >
   > >       > what can i do do prevent this ?????
   > >       >
   > >       > regards
   > >       >
   > >       > Gilles Renne
   > >       > This message contains confidential information. To know
   more,
   > >     please
   > >       > click on the following link:
   > >     [2][13][13]http://disclaimer.bureauveritas.com
   > >       > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >       > [Bild entfernt]
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >       >
   [3][14][14]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       --
   > >       IMPORTANT NOTICE:
   > >       This email is confidential, may be legally privileged, and is
   for the
   > >       intended recipient only. Access, disclosure, copying,
   distribution,
   > >     or
   > >       reliance on any of it by anyone else is prohibited and may be
   a
   > >       criminal
   > >       offence. Please delete if obtained in error and email
   confirmation to
   > >       the sender.
   > >       -------------- next part --------------
   > >         Gilles,
   > >         I added some procedures to module WSDL2R98 of service
   program
   > >         WSDL2RPGRT to control the integrated XML entity encoder.
   Replace
   > >     the
   > >         existing source members and reinstall WSDL2RPG if you want
   to use
   > >     the
   > >         new procedures:
   > >           //  Enables/disables the integrated XML entity encode.
   > >           XmlEntityEncoder_setEnabled(isEnabled)
   > >           //  Returns the enabled status of the integrated XML
   entity
   > >       encoder.
   > >           isEnabled = XmlEntityEncoder_isEnabled()
   > >           //  Encodes XML entities up to 64k (V5R4 and lower).
   > >           encoded = XmlEntityEncoder_encode(i_value)
   > >           //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >           encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >           //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >           XmlEntityEncoder_encodeV6(
   > >              i_value: %addr(encoded): %addr(encoded: *DATA):
   > >     %size(encoded));
   > >         Regards,
   > >         Thomas.
   > >         ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   > >     14:33:34:
   > >         > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >         > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >         > Datum: 01.07.2013 14:41
   > >         > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >         > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >         >
   > >         >
   > >         > Hi,
   > >         >
   > >         > I try to send chineese characters like
   > >         >
   > >         > when i view this on Iseries
   > >         > i see
   > >         >
   > >         >
   > >         >
   > >         > So chineese characters 5075
   > >         >
   > >         > has a & , then this characters is remove for escape
   characters
   > >         function
   > >         > ( XmlEntityEncoder_encodeToStream)
   > >         >
   > >         > and then after the i_conv  function is wrong because a db
   > >     character
   > >         lost
   > >         > one hexa decimal value.
   > >         >
   > >         > what can i do do prevent this ?????
   > >         >
   > >         > regards
   > >         >
   > >         > Gilles Renne
   > >         > This message contains confidential information. To know
   more,
   > >       please
   > >         > click on the following link:
   > >       [1][4][15][15]http://disclaimer.bureauveritas.com
   > >         > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >         > [Bild entfernt]
   > >         >
   > >
   > >
   -----------------------------------------------------------------------
   > >         > This is the FTPAPI mailing list.  To unsubscribe, please
   go to:
   > >         >
   [2][5][16][16]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >         >
   > >
   > >
   -----------------------------------------------------------------------
   > >         --
   > >         IMPORTANT NOTICE:
   > >         This email is confidential, may be legally privileged, and
   is for
   > >     the
   > >         intended recipient only. Access, disclosure, copying,
   distribution,
   > >       or
   > >         reliance on any of it by anyone else is prohibited and may
   be a
   > >         criminal
   > >         offence. Please delete if obtained in error and email
   confirmation
   > >     to
   > >         the sender.
   > >       References
   > >         1. [6][17][17]http://disclaimer.bureauveritas.com/
   > >         2.
   [7][18][18]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       -------------- next part --------------
   > >       A non-text attachment was scrubbed...
   > >       Name: Patch_XmlEncoder_for_v1.15.5+.zip
   > >       Type: application/zip
   > >       Size: 31638 bytes
   > >       Desc: not available
   > >       URL:
   > >
   > >
   <[8][19][19]http://scottklement.com/pipermail/ftpapi/attachments/201307
   02/f
   > >     ea97
   > >       de9/attachment.zip>
   > >       ------------------------------
   > >
   > >
   -----------------------------------------------------------------------
   > >       This is the FTPAPI mailing list digest.  To unsubscribe, go
   to:
   > >
   [9][20][20]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >
   > >
   -----------------------------------------------------------------------
   > >       End of Ftpapi Digest, Vol 81, Issue 3
   > >       *************************************
   > >       This message contains confidential information. To know more,
   please
   > >       click on the following link:
   [21][21]http://disclaimer.bureauveritas.com
   > >     References
   > >       1. [22][22]http://scottklement.com/mailman/listinfo/ftpapi
   > >       2. [23][23]http://disclaimer.bureauveritas.com/
   > >       3.
   [24][24]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       4. [25][25]http://disclaimer.bureauveritas.com/
   > >       5.
   [26][26]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       6. [27][27]http://disclaimer.bureauveritas.com/
   > >       7.
   [28][28]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       8.
   > >
   [29][29]http://scottklement.com/pipermail/ftpapi/attachments/20130702/f
   ea97
   > >     de9/attachment.zip
   > >       9.
   [30][30]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     -------------- next part --------------
   > >     A non-text attachment was scrubbed...
   > >     Name: graycol.gif
   > >     Type: image/gif
   > >     Size: 105 bytes
   > >     Desc: not available
   > >     URL:
   > >
   <[31][31]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   9279
   > >     210e/attachment.gif>
   > >     -------------- next part --------------
   > >     A non-text attachment was scrubbed...
   > >     Name: pic06064.gif
   > >     Type: image/gif
   > >     Size: 1255 bytes
   > >     Desc: not available
   > >     URL:
   > >
   <[32][32]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   9279
   > >     210e/attachment-0001.gif>
   > >     -------------- next part --------------
   > >     A non-text attachment was scrubbed...
   > >     Name: ecblank.gif
   > >     Type: image/gif
   > >     Size: 45 bytes
   > >     Desc: not available
   > >     URL:
   > >
   <[33][33]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   9279
   > >     210e/attachment-0002.gif>
   > >     ------------------------------
   > >     Message: 2
   > >     Date: Tue, 2 Jul 2013 13:14:33 +0200
   > >     From: thomas.raddatz@xxxxxx
   > >     To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     Subject: Re: RE Ftpapi Digest, Vol 81, Issue 3
   > >     Message-ID:
   > >
   <OFE220083F.9F11B05A-ONC1257B9C.003D4C5B-C1257B9C.003DC1F8@xxxxxx>
   > >     Content-Type: text/plain; charset="iso-8859-1"
   > >     OK. That means that you have WSDL2RPG v1.15.5 or lower, because
   message
   > >     description USR5020 has been changed with 1.15.6, right?
   > >     Please replace member USR5020 with the attached one and try to
   compile
   > >     again.
   > >     Thomas.
   > >     ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 02.07.2013
   12:56:21:
   > >     > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >     > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     > Kopie: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     > Datum: 02.07.2013 13:05
   > >     > Betreff: RE Ftpapi Digest, Vol 81, Issue 3
   > >     > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     >
   > >     >
   > >     > hi
   > >     >
   > >     > i have a compilation error
   > >     > USR50203 is not find
   > >     >
   > >     >
   > >     > regards
   > >     >
   > >     > Gilles Renne
   > >     >
   > >     >
   > >     >
   > >     >
   > >     >
   > >     >              ftpapi-request@li
   > >     >              sts.scottklement.
   > >     >              com A
   > >     >              Envoy? par :
   ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     >              ftpapi-bounces@li cc
   > >     >              sts.scottklement.
   > >     >              com Objet
   > >     >                                        Ftpapi Digest, Vol 81,
   Issue 3
   > >     > R?f.
   > >     >              02/07/2013 11:12
   > >     >
   > >     >
   > >     >              Veuillez r?pondre
   > >     >                      ?
   > >     >              ftpapi@xxxxxxxxxx
   > >     >                tklement.com
   > >     >
   > >     >
   > >     >
   > >     >
   > >     >
   > >     >
   > >     > Send Ftpapi mailing list submissions to
   > >     >        ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     >
   > >     > To subscribe or unsubscribe via the World Wide Web, visit
   > >     >
   [34][34]http://scottklement.com/mailman/listinfo/ftpapi
   > >     > or, via email, send a message with subject or body 'help' to
   > >     >        ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >     >
   > >     > You can reach the person managing the list at
   > >     >        ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
   > >     >
   > >     > When replying, please edit your Subject line so it is more
   specific
   > >     > than "Re: Contents of Ftpapi digest..."
   > >     >
   > >     >
   > >     > Today's Topics:
   > >     >
   > >     >    1. Re: Problem to send DB characters - Remove Escape
   characters
   > >     >       (thomas.raddatz@xxxxxx)
   > >     >
   > >     >
   > >     >
   > >
   ----------------------------------------------------------------------
   > >     >
   > >     > Message: 1
   > >     > Date: Tue, 2 Jul 2013 11:12:41 +0200
   > >     > From: thomas.raddatz@xxxxxx
   > >     > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >     > Subject: Re: Problem to send DB characters - Remove Escape
   characters
   > >     > Message-ID:
   > >     >
   > >     >
   <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
   > >     > Content-Type: text/plain; charset="us-ascii"
   > >     >
   > >     >
   > >     > Gilles,
   > >     >
   > >     > I added some procedures to module WSDL2R98 of service program
   > >     WSDL2RPGRT
   > >     > to control the integrated XML entity encoder. Replace the
   existing
   > >     source
   > >     > members and reinstall WSDL2RPG if you want to use the new
   procedures:
   > >     >
   > >     >
   > >     >   //  Enables/disables the integrated XML entity encode.
   > >     >   XmlEntityEncoder_setEnabled(isEnabled)
   > >     >
   > >     >
   > >     >   //  Returns the enabled status of the integrated XML entity
   > >     encoder.
   > >     >   isEnabled = XmlEntityEncoder_isEnabled()
   > >     >
   > >     >
   > >     >   //  Encodes XML entities up to 64k (V5R4 and lower).
   > >     >   encoded = XmlEntityEncoder_encode(i_value)
   > >     >
   > >     >
   > >     >   //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >     >   encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >     >
   > >     >
   > >     >   //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >     >   XmlEntityEncoder_encodeV6(
   > >     >      i_value: %addr(encoded): %addr(encoded: *DATA):
   %size(encoded));
   > >     >
   > >     >
   > >     > Regards,
   > >     >
   > >     >
   > >     > Thomas.
   > >     >
   > >     >
   > >     >
   > >     > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   14:33:34:
   > >     >
   > >     > > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >     > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     > > Datum: 01.07.2013 14:41
   > >     > > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >     > > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     > >
   > >     > >
   > >     > > Hi,
   > >     > >
   > >     > > I try to send chineese characters like
   > >     > >
   > >     > > when i view this on Iseries
   > >     > > i see
   > >     > >
   > >     > >
   > >     > >
   > >     > > So chineese characters 5075
   > >     > >
   > >     > > has a & , then this characters is remove for escape
   characters
   > >     function
   > >     > > ( XmlEntityEncoder_encodeToStream)
   > >     > >
   > >     > > and then after the i_conv  function is wrong because a db
   character
   > >     lost
   > >     > > one hexa decimal value.
   > >     > >
   > >     > > what can i do do prevent this ?????
   > >     > >
   > >     > > regards
   > >     > >
   > >     > > Gilles Renne
   > >     > > This message contains confidential information. To know
   more,
   > >     please
   > >     > > click on the following link:
   > >     [35][35]http://disclaimer.bureauveritas.com
   > >     > > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >     > > [Bild entfernt]
   > >     > >
   > >
   -----------------------------------------------------------------------
   > >     > > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >     > > [36][36]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     > >
   > >
   -----------------------------------------------------------------------
   > >     >
   > >     >
   > >     > --
   > >     > IMPORTANT NOTICE:
   > >     > This email is confidential, may be legally privileged, and is
   for the
   > >     > intended recipient only. Access, disclosure, copying,
   distribution,
   > >     or
   > >     > reliance on any of it by anyone else is prohibited and may be
   a
   > >     criminal
   > >     > offence. Please delete if obtained in error and email
   confirmation to
   > >     the
   > >     > sender.
   > >     > -------------- next part --------------
   > >     >    Gilles,
   > >     >    I added some procedures to module WSDL2R98 of service
   program
   > >     >    WSDL2RPGRT to control the integrated XML entity encoder.
   Replace
   > >     the
   > >     >    existing source members and reinstall WSDL2RPG if you want
   to use
   > >     the
   > >     >    new procedures:
   > >     >      //  Enables/disables the integrated XML entity encode.
   > >     >      XmlEntityEncoder_setEnabled(isEnabled)
   > >     >      //  Returns the enabled status of the integrated XML
   entity
   > >     encoder.
   > >     >      isEnabled = XmlEntityEncoder_isEnabled()
   > >     >      //  Encodes XML entities up to 64k (V5R4 and lower).
   > >     >      encoded = XmlEntityEncoder_encode(i_value)
   > >     >      //  Encodes XML entities up to 1MB (V6R1 or highe r).
   > >     >      encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >     >      //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >     >      XmlEntityEncoder_encodeV6(
   > >     >         i_value: %addr(encoded): %addr(encoded: *DATA):
   > >     %size(encoded));
   > >     >    Regards,
   > >     >    Thomas.
   > >     >    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am
   01.07.2013
   > >     14:33:34:
   > >     >    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >     >    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >     >    > Datum: 01.07.2013 14:41
   > >     >    > Betreff: Problem to send DB characters - Remove Escape
   > >     characters
   > >     >    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >     >    >
   > >     >    >
   > >     >    > Hi,
   > >     >    >
   > >     >    > I try to send chineese characters like
   > >     >    >
   > >     >    > when i view this on Iseries
   > >     >    > i see
   > >     >    >
   > >     >    >
   > >     >    >
   > >     >    > So chineese characters 5075
   > >     >    >
   > >     >    > has a & , then this characters is remove for escape
   characters
   > >     >    function
   > >     >    > ( XmlEntityEncoder_encodeToStream)
   > >     >    >
   > >     >    > and then after the i_conv  function is wrong because a
   db
   > >     character
   > >     >    lost
   > >     >    > one hexa decimal value.
   > >     >    >
   > >     >    > what can i do do prevent this ?????
   > >     >    >
   > >     >    > regards
   > >     >    >
   > >     >    > Gilles Renne
   > >     >    > This message contains confidential information. To know
   more,
   > >     please
   > >     >    > click on the following link:
   > >     [1][37][37]http://disclaimer.bureauveritas.com
   > >     >    > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >     >    > [Bild entfernt]
   > >     >    >
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     >    > This is the FTPAPI mailing list.  To unsubscribe, please
   go to:
   > >     >    >
   [2][38][38]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     >    >
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     >
   > >     >    --
   > >     >    IMPORTANT NOTICE:
   > >     >    This email is confidential, may be legally privileged, and
   is for
   > >     the
   > >     >    intended recipient only. Access, disclosure, copying,
   > >     distribution,
   > >     or
   > >     >    reliance on any of it by anyone else is prohibited and may
   be a
   > >     >    criminal
   > >     >    offence. Please delete if obtained in error and email
   confirmation
   > >     to
   > >     >    the sender.
   > >     >
   > >     > References
   > >     >
   > >     >    1. [39][39]http://disclaimer.bureauveritas.com/
   > >     >    2.
   [40][40]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     > -------------- next part --------------
   > >     > A non-text attachment was scrubbed...
   > >     > Name: Patch_XmlEncoder_for_v1.15.5+.zip
   > >     > Type: application/zip
   > >     > Size: 31638 bytes
   > >     > Desc: not available
   > >     > URL: <
   > >     >
   [41][41]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   > >     > fea97de9/attachment.zip
   > >     > >
   > >     >
   > >     > ------------------------------
   > >     >
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     > This is the FTPAPI mailing list digest.  To unsubscribe, go
   to:
   > >     > [42][42]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     >
   > >     >
   > >     > End of Ftpapi Digest, Vol 81, Issue 3
   > >     > *************************************
   > >     > This message contains confidential information. To know more,
   please
   > >     > click on the following link:
   [43][43]http://disclaimer.bureauveritas.com
   > >     > [Bild entfernt] [Bild entfernt] [Bild entfernt]
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >     > [44][44]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     >
   > >
   -----------------------------------------------------------------------
   > >     --
   > >     IMPORTANT NOTICE:
   > >     This email is confidential, may be legally privileged, and is
   for the
   > >     intended recipient only. Access, disclosure, copying,
   distribution, or
   > >     reliance on any of it by anyone else is prohibited and may be a
   > >     criminal
   > >     offence. Please delete if obtained in error and email
   confirmation to
   > >     the sender.
   > >     -------------- next part --------------
   > >       OK. That means that you have WSDL2RPG v1.15.5 or lower,
   because
   > >     message
   > >       description USR5020 has been changed with 1.15.6, right?
   > >       Please replace member USR5020 with the attached one and try
   to
   > >     compile
   > >       again.
   > >       Thomas.
   > >       ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 02.07.2013
   12:56:21:
   > >       > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >       > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       > Kopie: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       > Datum: 02.07.2013 13:05
   > >       > Betreff: RE Ftpapi Digest, Vol 81, Issue 3
   > >       > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       >
   > >       > hi
   > >       >
   > >       > i have a compilation error
   > >       > USR50203 is not find
   > >       >
   > >       >
   > >       > regards
   > >       >
   > >       > Gilles Renne
   > >       >
   > >       >
   > >       >
   > >       >
   > >       >
   > >       >              ftpapi-request@li
   > >       >              sts.scottklement.
   > >       >              com
   > >           A
   > >       >              Envoy? par :
   > >     ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       >              ftpapi-bounces@li
   > >          cc
   > >       >              sts.scottklement.
   > >       >              com
   > >       Objet
   > >       >                                        Ftpapi Digest, Vol
   81, Issue
   > >     3
   > >       >
   > >       R?f.
   > >       >              02/07/2013 11:12
   > >       >
   > >       >
   > >       >              Veuillez r?pondre
   > >       >                      ?
   > >       >              ftpapi@xxxxxxxxxx
   > >       >                tklement.com
   > >       >
   > >       >
   > >       >
   > >       >
   > >       >
   > >       >
   > >       > Send Ftpapi mailing list submissions to
   > >       >        ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       > To subscribe or unsubscribe via the World Wide Web, visit
   > >       >
   [1][45][45]http://scottklement.com/mailman/listinfo/ftpapi
   > >       > or, via email, send a message with subject or body 'help'
   to
   > >       >        ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       > You can reach the person managing the list at
   > >       >        ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
   > >       >
   > >       > When replying, please edit your Subject line so it is more
   specific
   > >       > than "Re: Contents of Ftpapi digest..."
   > >       >
   > >       >
   > >       > Today's Topics:
   > >       >
   > >       >    1. Re: Problem to send DB characters - Remove Escape
   characters
   > >       >       (thomas.raddatz@xxxxxx)
   > >       >
   > >       >
   > >       >
   > >
   > >
   ----------------------------------------------------------------------
   > >       >
   > >       > Message: 1
   > >       > Date: Tue, 2 Jul 2013 11:12:41 +0200
   > >       > From: thomas.raddatz@xxxxxx
   > >       > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   > >       > Subject: Re: Problem to send DB characters - Remove Escape
   > >     characters
   > >       > Message-ID:
   > >       >
   > >       >
   <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
   > >       > Content-Type: text/plain; charset="us-ascii"
   > >       >
   > >       >
   > >       > Gilles,
   > >       >
   > >       > I added some procedures to module WSDL2R98 of service
   program
   > >       WSDL2RPGRT
   > >       > to control the integrated XML entity encoder. Replace the
   existing
   > >       source
   > >       > members and reinstall WSDL2RPG if you want to use the new
   > >     procedures:
   > >       >
   > >       >
   > >       >   //  Enables/disables the integrated XML entity encode.
   > >       >   XmlEntityEncoder_setEnabled(isEnabled)
   > >       >
   > >       >
   > >       >   //  Returns the enabled status of the integrated XML
   entity
   > >       encoder.
   > >       >   isEnabled = XmlEntityEncoder_isEnabled()
   > >       >
   > >       >
   > >       >   //  Encodes XML entities up to 64k (V5R4 and lower).
   > >       >   encoded = XmlEntityEncoder_encode(i_value)
   > >       >
   > >       >
   > >       >   //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >       >   encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >       >
   > >       >
   > >       >   //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >       >   XmlEntityEncoder_encodeV6(
   > >       >      i_value: %addr(encoded): %addr(encoded: *DATA):
   > >     %size(encoded));
   > >       >
   > >       >
   > >       > Regards,
   > >       >
   > >       >
   > >       > Thomas.
   > >       >
   > >       >
   > >       >
   > >       > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
   > >     14:33:34:
   > >       >
   > >       > > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >       > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       > > Datum: 01.07.2013 14:41
   > >       > > Betreff: Problem to send DB characters - Remove Escape
   characters
   > >       > > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       > >
   > >       > >
   > >       > > Hi,
   > >       > >
   > >       > > I try to send chineese characters like
   > >       > >
   > >       > > when i view this on Iseries
   > >       > > i see
   > >       > >
   > >       > >
   > >       > >
   > >       > > So chineese characters 5075
   > >       > >
   > >       > > has a & , then this characters is remove for escape
   characters
   > >       function
   > >       > > ( XmlEntityEncoder_encodeToStream)
   > >       > >
   > >       > > and then after the i_conv  function is wrong because a db
   > >     character
   > >       lost
   > >       > > one hexa decimal value.
   > >       > >
   > >       > > what can i do do prevent this ?????
   > >       > >
   > >       > > regards
   > >       > >
   > >       > > Gilles Renne
   > >       > > This message contains confidential information. To know
   more,
   > >       please
   > >       > > click on the following link:
   > >     [2][46][46]http://disclaimer.bureauveritas.com
   > >       > > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   entfernt]
   > >       > > [Bild entfernt]
   > >       > >
   > >
   > >
   -----------------------------------------------------------------------
   > >       > > This is the FTPAPI mailing list.  To unsubscribe, please
   go to:
   > >       > >
   [3][47][47]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       > >
   > >
   > >
   -----------------------------------------------------------------------
   > >       >
   > >       >
   > >       > --
   > >       > IMPORTANT NOTICE:
   > >       > This email is confidential, may be legally privileged, and
   is for
   > >     the
   > >       > intended recipient only. Access, disclosure, copying,
   distribution,
   > >       or
   > >       > reliance on any of it by anyone else is prohibited and may
   be a
   > >       criminal
   > >       > offence. Please delete if obtained in error and email
   confirmation
   > >     to
   > >       the
   > >       > sender.
   > >       > -------------- next part --------------
   > >       >    Gilles,
   > >       >    I added some procedures to module WSDL2R98 of service
   program
   > >       >    WSDL2RPGRT to control the integrated XML entity encoder.
   Replace
   > >       the
   > >       >    existing source members and reinstall WSDL2RPG if you
   want to
   > >     use
   > >       the
   > >       >    new procedures:
   > >       >      //  Enables/disables the integrated XML entity encode.
   > >       >      XmlEntityEncoder_setEnabled(isEnabled)
   > >       >      //  Returns the enabled status of the integrated XML
   entity
   > >       encoder.
   > >       >      isEnabled = XmlEntityEncoder_isEnabled()
   > >       >      //  Encodes XML entities up to 64k (V5R4 and lower).
   > >       >      encoded = XmlEntityEncoder_encode(i_value)
   > >       >      //  Encodes XML entities up to 1MB (V6R1 or higher).
   > >       >      encoded = XmlEntityEncoder_encodeLarge(i_value)
   > >       >      //  Encodes XML entities up to 16MB (V6R1 or higher).
   > >       >      XmlEntityEncoder_encodeV6(
   > >       >         i_value: %addr(encoded): %addr(encoded: *DATA):
   > >       %size(encoded));
   > >       >    Regards,
   > >       >    Thomas.
   > >       >    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am
   01.07.2013
   > >       14:33:34:
   > >       >    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
   > >       >    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
   > >       >    > Datum: 01.07.2013 14:41
   > >       >    > Betreff: Problem to send DB characters - Remove Escape
   > >       characters
   > >       >    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   > >       >    >
   > >       >    >
   > >       >    > Hi,
   > >       >    >
   > >       >    > I try to send chineese characters like
   > >       >    >
   > >       >    > when i view this on Iseries
   > >       >    > i see
   > >       >    >
   > >       >    >
   > >       >    >
   > >       >    > So chineese characters 5075
   > >       >    >
   > >       >    > has a & , then this characters is remove for escape
   characters
   > >       >    function
   > >       >    > ( XmlEntityEncoder_encodeToStream)
   > >       >    >
   > >       >    > and then after the i_conv  function is wrong because a
   db
   > >       character
   > >       >    lost
   > >       >    > one hexa decimal value.
   > >       >    >
   > >       >    > what can i do do prevent this ?????
   > >       >    >
   > >       >    > regards
   > >       >    >
   > >       >    > Gilles Renne
   > >       >    > This message contains confidential information. To
   know more,
   > >       please
   > >       >    > click on the following link:
   > >       [1][4][48][48]http://disclaimer.bureauveritas.com
   > >       >    > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
   > >     entfernt]
   > >       >    > [Bild entfernt]
   > >       >    >
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       >    > This is the FTPAPI mailing list.  To unsubscribe,
   please go
   > >     to:
   > >       >    >
   [2][5][49][49]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       >    >
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       >
   > >       >    --
   > >       >    IMPORTANT NOTICE:
   > >       >    This email is confidential, may be legally privileged,
   and is
   > >     for
   > >       the
   > >       >    intended recipient only. Access, disclosure, copying,
   > >       distribution, or
   > >       >    reliance on any of it by anyone else is prohibited and
   may be a
   > >       >    criminal
   > >       >    offence. Please delete if obtained in error and email
   > >     confirmation
   > >       to
   > >       >    the sender.
   > >       >
   > >       > References
   > >       >
   > >       >    1. [6][50][50]http://disclaimer.bureauveritas.com/
   > >       >    2.
   [7][51][51]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       > -------------- next part --------------
   > >       > A non-text attachment was scrubbed...
   > >       > Name: Patch_XmlEncoder_for_v1.15.5+.zip
   > >       > Type: application/zip
   > >       > Size: 31638 bytes
   > >       > Desc: not available
   > >       > URL: <
   > >       >
   > >
   [8][52][52]http://scottklement.com/pipermail/ftpapi/attachments/2013070
   2/
   > >       > fea97de9/attachment.zip
   > >       > >
   > >       >
   > >       > ------------------------------
   > >       >
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       > This is the FTPAPI mailing list digest.  To unsubscribe, go
   to:
   > >       >
   [9][53][53]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       >
   > >       >
   > >       > End of Ftpapi Digest, Vol 81, Issue 3
   > >       > *************************************
   > >       > This message contains confidential information. To know
   more,
   > >     please
   > >       > click on the following link:
   > >     [10][54][54]http://disclaimer.bureauveritas.com
   > >       > [Bild entfernt] [Bild entfernt] [Bild entfernt]
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       > This is the FTPAPI mailing list.  To unsubscribe, please go
   to:
   > >       >
   [11][55][55]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       >
   > >
   > >
   -----------------------------------------------------------------------
   > >       --
   > >       IMPORTANT NOTICE:
   > >       This email is confidential, may be legally privileged, and is
   for the
   > >       intended recipient only. Access, disclosure, copying,
   distribution,
   > >     or
   > >       reliance on any of it by anyone else is prohibited and may be
   a
   > >       criminal
   > >       offence. Please delete if obtained in error and email
   confirmation to
   > >       the sender.
   > >     References
   > >       1. [56][56]http://scottklement.com/mailman/listinfo/ftpapi
   > >       2. [57][57]http://disclaimer.bureauveritas.com/
   > >       3.
   [58][58]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       4. [59][59]http://disclaimer.bureauveritas.com/
   > >       5.
   [60][60]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       6. [61][61]http://disclaimer.bureauveritas.com/
   > >       7.
   [62][62]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >       8.
   [63][63]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   > >       9.
   [64][64]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >      10. [65][65]http://disclaimer.bureauveritas.com/
   > >      11.
   [66][66]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     -------------- next part --------------
   > >     A non-text attachment was scrubbed...
   > >     Name: USR5020.rpgle
   > >     Type: application/octet-stream
   > >     Size: 468 bytes
   > >     Desc: not available
   > >     URL:
   > >
   <[67][67]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   26ba
   > >     65e4/attachment.obj>
   > >     ------------------------------
   > >
   -----------------------------------------------------------------------
   > >     This is the FTPAPI mailing list digest.  To unsubscribe, go to:
   > >     [68][68]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >
   -----------------------------------------------------------------------
   > >     End of Ftpapi Digest, Vol 81, Issue 4
   > >     *************************************
   > >     This message contains confidential information. To know more,
   please
   > >     click on the following link:
   [69]http://disclaimer.bureauveritas.com
   > >
   > > References
   > >
   > >     1. [70]http://scottklement.com/mailman/listinfo/ftpapi
   > >     2. [71]http://scottklement.com/mailman/listinfo/ftpapi
   > >     3. [72]http://disclaimer.bureauveritas.com/
   > >     4. [73]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     5. [74]http://disclaimer.bureauveritas.com/
   > >     6. [75]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     7. [76]http://disclaimer.bureauveritas.com/
   > >     8. [77]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >     9. [78]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/fea97de9/attachment.zip
   > >    10. [79]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    11. [80]http://disclaimer.bureauveritas.com/
   > >    12. [81]http://scottklement.com/mailman/listinfo/ftpapi
   > >    13. [82]http://disclaimer.bureauveritas.com/
   > >    14. [83]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    15. [84]http://disclaimer.bureauveritas.com/
   > >    16. [85]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    17. [86]http://disclaimer.bureauveritas.com/
   > >    18. [87]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    19.
   [88]http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97
   > >    20. [89]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    21. [90]http://disclaimer.bureauveritas.com/
   > >    22. [91]http://scottklement.com/mailman/listinfo/ftpapi
   > >    23. [92]http://disclaimer.bureauveritas.com/
   > >    24. [93]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    25. [94]http://disclaimer.bureauveritas.com/
   > >    26. [95]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    27. [96]http://disclaimer.bureauveritas.com/
   > >    28. [97]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    29. [98]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/fea97de9/attachment.zip
   > >    30. [99]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    31. [100]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/9279210e/attachment.gif
   > >    32. [101]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/9279210e/attachment-0001.gif
   > >    33. [102]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/9279210e/attachment-0002.gif
   > >    34. [103]http://scottklement.com/mailman/listinfo/ftpapi
   > >    35. [104]http://disclaimer.bureauveritas.com/
   > >    36. [105]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    37. [106]http://disclaimer.bureauveritas.com/
   > >    38. [107]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    39. [108]http://disclaimer.bureauveritas.com/
   > >    40. [109]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    41.
   [110]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   > >    42. [111]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    43. [112]http://disclaimer.bureauveritas.com/
   > >    44. [113]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    45. [114]http://scottklement.com/mailman/listinfo/ftpapi
   > >    46. [115]http://disclaimer.bureauveritas.com/
   > >    47. [116]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    48. [117]http://disclaimer.bureauveritas.com/
   > >    49. [118]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    50. [119]http://disclaimer.bureauveritas.com/
   > >    51. [120]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    52.
   [121]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   > >    53. [122]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    54. [123]http://disclaimer.bureauveritas.com/
   > >    55. [124]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    56. [125]http://scottklement.com/mailman/listinfo/ftpapi
   > >    57. [126]http://disclaimer.bureauveritas.com/
   > >    58. [127]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    59. [128]http://disclaimer.bureauveritas.com/
   > >    60. [129]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    61. [130]http://disclaimer.bureauveritas.com/
   > >    62. [131]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    63.
   [132]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   > >    64. [133]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    65. [134]http://disclaimer.bureauveritas.com/
   > >    66. [135]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >    67. [136]http://scottklement.com/pipermail/ftpapi/attachments/
   > 20130702/26ba65e4/attachment.obj
   > >    68. [137]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >
   > >
   > >
   > >
   -----------------------------------------------------------------------
   > > This is the FTPAPI mailing list.  To unsubscribe, please go to:
   > > [138]http://www.scottklement.com/mailman/listinfo/ftpapi
   > >
   -----------------------------------------------------------------------
   > >
   >
   -----------------------------------------------------------------------
   > This is the FTPAPI mailing list.  To unsubscribe, please go to:
   > [139]http://www.scottklement.com/mailman/listinfo/ftpapi
   >
   -----------------------------------------------------------------------

   --
   IMPORTANT NOTICE:
   This email is confidential, may be legally privileged, and is for the
   intended recipient only. Access, disclosure, copying, distribution, or
   reliance on any of it by anyone else is prohibited and may be a
   criminal
   offence. Please delete if obtained in error and email confirmation to
   the sender.

References

   1. http://scottklement.com/mailman/listinfo/ftpapi
   2. http://scottklement.com/mailman/listinfo/ftpapi
   3. http://disclaimer.bureauveritas.com/
   4. http://www.scottklement.com/mailman/listinfo/ftpapi
   5. http://disclaimer.bureauveritas.com/
   6. http://www.scottklement.com/mailman/listinfo/ftpapi
   7. http://disclaimer.bureauveritas.com/
   8. http://www.scottklement.com/mailman/listinfo/ftpapi
   9. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97d
  10. http://www.scottklement.com/mailman/listinfo/ftpapi
  11. http://disclaimer.bureauveritas.com/
  12. http://scottklement.com/mailman/listinfo/ftpapi
  13. http://disclaimer.bureauveritas.com/
  14. http://www.scottklement.com/mailman/listinfo/ftpapi
  15. http://disclaimer.bureauveritas.com/
  16. http://www.scottklement.com/mailman/listinfo/ftpapi
  17. http://disclaimer.bureauveritas.com/
  18. http://www.scottklement.com/mailman/listinfo/ftpapi
  19. http://scottklement.com/pipermail/ftpapi/attachments/20130702/f
  20. http://www.scottklement.com/mailman/listinfo/ftpapi
  21. http://disclaimer.bureauveritas.com/
  22. http://scottklement.com/mailman/listinfo/ftpapi
  23. http://disclaimer.bureauveritas.com/
  24. http://www.scottklement.com/mailman/listinfo/ftpapi
  25. http://disclaimer.bureauveritas.com/
  26. http://www.scottklement.com/mailman/listinfo/ftpapi
  27. http://disclaimer.bureauveritas.com/
  28. http://www.scottklement.com/mailman/listinfo/ftpapi
  29. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97
  30. http://www.scottklement.com/mailman/listinfo/ftpapi
  31. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
  32. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
  33. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
  34. http://scottklement.com/mailman/listinfo/ftpapi
  35. http://disclaimer.bureauveritas.com/
  36. http://www.scottklement.com/mailman/listinfo/ftpapi
  37. http://disclaimer.bureauveritas.com/
  38. http://www.scottklement.com/mailman/listinfo/ftpapi
  39. http://disclaimer.bureauveritas.com/
  40. http://www.scottklement.com/mailman/listinfo/ftpapi
  41. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
  42. http://www.scottklement.com/mailman/listinfo/ftpapi
  43. http://disclaimer.bureauveritas.com/
  44. http://www.scottklement.com/mailman/listinfo/ftpapi
  45. http://scottklement.com/mailman/listinfo/ftpapi
  46. http://disclaimer.bureauveritas.com/
  47. http://www.scottklement.com/mailman/listinfo/ftpapi
  48. http://disclaimer.bureauveritas.com/
  49. http://www.scottklement.com/mailman/listinfo/ftpapi
  50. http://disclaimer.bureauveritas.com/
  51. http://www.scottklement.com/mailman/listinfo/ftpapi
  52. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
  53. http://www.scottklement.com/mailman/listinfo/ftpapi
  54. http://disclaimer.bureauveritas.com/
  55. http://www.scottklement.com/mailman/listinfo/ftpapi
  56. http://scottklement.com/mailman/listinfo/ftpapi
  57. http://disclaimer.bureauveritas.com/
  58. http://www.scottklement.com/mailman/listinfo/ftpapi
  59. http://disclaimer.bureauveritas.com/
  60. http://www.scottklement.com/mailman/listinfo/ftpapi
  61. http://disclaimer.bureauveritas.com/
  62. http://www.scottklement.com/mailman/listinfo/ftpapi
  63. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
  64. http://www.scottklement.com/mailman/listinfo/ftpapi
  65. http://disclaimer.bureauveritas.com/
  66. http://www.scottklement.com/mailman/listinfo/ftpapi
  67. http://scottklement.com/pipermail/ftpapi/attachments/20130702/26ba
  68. http://www.scottklement.com/mailman/listinfo/ftpapi
  69. http://disclaimer.bureauveritas.com/
  70. http://scottklement.com/mailman/listinfo/ftpapi
  71. http://scottklement.com/mailman/listinfo/ftpapi
  72. http://disclaimer.bureauveritas.com/
  73. http://www.scottklement.com/mailman/listinfo/ftpapi
  74. http://disclaimer.bureauveritas.com/
  75. http://www.scottklement.com/mailman/listinfo/ftpapi
  76. http://disclaimer.bureauveritas.com/
  77. http://www.scottklement.com/mailman/listinfo/ftpapi
  78. http://scottklement.com/pipermail/ftpapi/attachments/
  79. http://www.scottklement.com/mailman/listinfo/ftpapi
  80. http://disclaimer.bureauveritas.com/
  81. http://scottklement.com/mailman/listinfo/ftpapi
  82. http://disclaimer.bureauveritas.com/
  83. http://www.scottklement.com/mailman/listinfo/ftpapi
  84. http://disclaimer.bureauveritas.com/
  85. http://www.scottklement.com/mailman/listinfo/ftpapi
  86. http://disclaimer.bureauveritas.com/
  87. http://www.scottklement.com/mailman/listinfo/ftpapi
  88. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97
  89. http://www.scottklement.com/mailman/listinfo/ftpapi
  90. http://disclaimer.bureauveritas.com/
  91. http://scottklement.com/mailman/listinfo/ftpapi
  92. http://disclaimer.bureauveritas.com/
  93. http://www.scottklement.com/mailman/listinfo/ftpapi
  94. http://disclaimer.bureauveritas.com/
  95. http://www.scottklement.com/mailman/listinfo/ftpapi
  96. http://disclaimer.bureauveritas.com/
  97. http://www.scottklement.com/mailman/listinfo/ftpapi
  98. http://scottklement.com/pipermail/ftpapi/attachments/
  99. http://www.scottklement.com/mailman/listinfo/ftpapi
 100. http://scottklement.com/pipermail/ftpapi/attachments/
 101. http://scottklement.com/pipermail/ftpapi/attachments/
 102. http://scottklement.com/pipermail/ftpapi/attachments/
 103. http://scottklement.com/mailman/listinfo/ftpapi
 104. http://disclaimer.bureauveritas.com/
 105. http://www.scottklement.com/mailman/listinfo/ftpapi
 106. http://disclaimer.bureauveritas.com/
 107. http://www.scottklement.com/mailman/listinfo/ftpapi
 108. http://disclaimer.bureauveritas.com/
 109. http://www.scottklement.com/mailman/listinfo/ftpapi
 110. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
 111. http://www.scottklement.com/mailman/listinfo/ftpapi
 112. http://disclaimer.bureauveritas.com/
 113. http://www.scottklement.com/mailman/listinfo/ftpapi
 114. http://scottklement.com/mailman/listinfo/ftpapi
 115. http://disclaimer.bureauveritas.com/
 116. http://www.scottklement.com/mailman/listinfo/ftpapi
 117. http://disclaimer.bureauveritas.com/
 118. http://www.scottklement.com/mailman/listinfo/ftpapi
 119. http://disclaimer.bureauveritas.com/
 120. http://www.scottklement.com/mailman/listinfo/ftpapi
 121. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
 122. http://www.scottklement.com/mailman/listinfo/ftpapi
 123. http://disclaimer.bureauveritas.com/
 124. http://www.scottklement.com/mailman/listinfo/ftpapi
 125. http://scottklement.com/mailman/listinfo/ftpapi
 126. http://disclaimer.bureauveritas.com/
 127. http://www.scottklement.com/mailman/listinfo/ftpapi
 128. http://disclaimer.bureauveritas.com/
 129. http://www.scottklement.com/mailman/listinfo/ftpapi
 130. http://disclaimer.bureauveritas.com/
 131. http://www.scottklement.com/mailman/listinfo/ftpapi
 132. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
 133. http://www.scottklement.com/mailman/listinfo/ftpapi
 134. http://disclaimer.bureauveritas.com/
 135. http://www.scottklement.com/mailman/listinfo/ftpapi
 136. http://scottklement.com/pipermail/ftpapi/attachments/
 137. http://www.scottklement.com/mailman/listinfo/ftpapi
 138. http://www.scottklement.com/mailman/listinfo/ftpapi
 139. http://www.scottklement.com/mailman/listinfo/ftpapi

Attachment: WSDL2R98.rpgle
Description: Binary data

-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------