[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problem to send DB characters - Remove Escape characters

Gilles,
It is hard to believe that it does not work for you. It is true that I did not run a complete integration test but I tested the new functionality with an extensive RPGUnit test. The procedures I tested are: 

   Marshaller_toString()
   Marshaller_toStringV6()
   XmlEntityEncoder_encode()
   XmlEntityEncoder_encodeLarge()
   XmlEntityEncoder_encodeV6()
May you please start the debugger for service program WSDL2RPGRT and module WSDL2R98 and add a breakpoint to the marshaller that your stub uses. For example, starting at Marshaller_toString(), the program flow is like this: 

   Marshaller_toString()
   -> encodeXmlEntityToFieldV6() // adapter procedure
      -> encodeXmlEntityToStream()
         -> GenericStream_write()

And for the V6 counterpart it is:

   Marshaller_toStringV6()
      -> encodeXmlEntityToStream()
         -> GenericStream_write()
So if the entity encoder is disabled the program should go through encodeXmlEntityToStream() in both cases. From encodeXmlEntityToStream() it should directly call GenericStream_write() without going through encodeXmlEntityToStreamInternally().
GenericStream_write() either writes the data to the output field or for the new V6 procedures directly appends the data to a "ManagedMemoryDataSource".
For the "old" non V6 procedures the data of the output field is indirectly appended to a "ManagedMemoryDataSource". First it is returned to the stub module and added to the "request" field. Then the "request" field is periodically appended to the "ManagedMemoryDataSource".
Eventually the data of the "ManagedMemoryDataSource" is passed as POST data to HTTPAPI. That is easier than it first appears to be. Just as a side note the "ManagedMemoryDataSource" is a combined memory and IFS file buffer. It uses the memory buffer as long as there is memory available. As soon as there is no more memory left, it switches to the slower file buffer. That way there is no limit for the POST data.
Important to know: You do not need to look at the "ManagedMemoryDataSource". I told you about it, to let you know, how your input data flows from the input data structure through the Marshallers, the Xml entity encoder and the "ManagedMemoryDataSource" until it ends up as the POST data in HTTP API.
So if your data goes through GenericStream_write(), it must be added to the POST data of your request message.
I am going to run my complete test suite tomorrow and for sure I let you know the result. 

Regards,

Thomas.



Am 03.07.2013 15:17, schrieb gilles.renne@xxxxxxxxxxxxxxxxx:

    Hi
    i receive Bad request  now
    and i have nothing in httpapi_debug file
    regards
    Gilles Renne
    Inactive hide details for ftpapi-request---02/07/2013
    13:45:29---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
    ftpapi-request---02/07/2013
    13:45:29---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx

    ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
        Envoyé par : ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
        02/07/2013 13:14


             Veuillez répondre à
        ftpapi@xxxxxxxxxxxxxxxxxxxxxx


    A

         ftpapi@xxxxxxxxxxxxxxxxxxxxxx

    cc

    Objet

         Ftpapi Digest, Vol 81, Issue 4

    Réf.

    Send Ftpapi mailing list submissions to
    ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    To subscribe or unsubscribe via the World Wide Web, visit
    [1]http://scottklement.com/mailman/listinfo/ftpapi
    or, via email, send a message with subject or body 'help' to
    ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
    You can reach the person managing the list at
    ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
    When replying, please edit your Subject line so it is more specific
    than "Re: Contents of Ftpapi digest..."
    Today's Topics:
      1. RE Ftpapi Digest, Vol 81, Issue 3 (gilles.renne@xxxxxxxxxxxxxxxxx)
      2. Re: RE Ftpapi Digest, Vol 81, Issue 3 (thomas.raddatz@xxxxxx)
    ----------------------------------------------------------------------
    Message: 1
    Date: Tue, 2 Jul 2013 12:56:21 +0200
    From: gilles.renne@xxxxxxxxxxxxxxxxx
    To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    Cc: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    Subject: RE Ftpapi Digest, Vol 81, Issue 3
    Message-ID:
    <OF58795E0F.39BA6186-ONC1257B9C.003BEBEC-C1257B9C.003C1783@LocalDomain>
    Content-Type: text/plain; charset="iso-8859-1"
    hi
    i have a compilation error
    USR50203 is not find
    regards
    Gilles Renne


                ftpapi-request@li

                sts.scottklement.

                com
    A
                Envoy? par :              ftpapi@xxxxxxxxxxxxxxxxxxxxxx

                ftpapi-bounces@li
    cc
                sts.scottklement.

                com
    Objet
                                          Ftpapi Digest, Vol 81, Issue 3


    R?f.
                02/07/2013 11:12





                Veuillez r?pondre

                        ?

                ftpapi@xxxxxxxxxx

                  tklement.com





    Send Ftpapi mailing list submissions to
     ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    To subscribe or unsubscribe via the World Wide Web, visit
     [2]http://scottklement.com/mailman/listinfo/ftpapi
    or, via email, send a message with subject or body 'help' to
     ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
    You can reach the person managing the list at
     ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
    When replying, please edit your Subject line so it is more specific
    than "Re: Contents of Ftpapi digest..."
    Today's Topics:
      1. Re: Problem to send DB characters - Remove Escape characters
         (thomas.raddatz@xxxxxx)
    ----------------------------------------------------------------------
    Message: 1
    Date: Tue, 2 Jul 2013 11:12:41 +0200
    From: thomas.raddatz@xxxxxx
    To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    Subject: Re: Problem to send DB characters - Remove Escape characters
    Message-ID:
    <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
    Content-Type: text/plain; charset="us-ascii"
    Gilles,
    I added some procedures to module WSDL2R98 of service program
    WSDL2RPGRT
    to control the integrated XML entity encoder. Replace the existing
    source
    members and reinstall WSDL2RPG if you want to use the new procedures:
     //  Enables/disables the integrated XML entity encode.
     XmlEntityEncoder_setEnabled(isEnabled)
     //  Returns the enabled status of the integrated XML entity encoder.
     isEnabled = XmlEntityEncoder_isEnabled()
     //  Encodes XML entities up to 64k (V5R4 and lower).
     encoded = XmlEntityEncoder_encode(i_value)
     //  Encodes XML entities up to 1MB (V6R1 or higher).
     encoded = XmlEntityEncoder_encodeLarge(i_value)
     //  Encodes XML entities up to 16MB (V6R1 or higher).
     XmlEntityEncoder_encodeV6(
        i_value: %addr(encoded): %addr(encoded: *DATA): %size(encoded));
    Regards,
    Thomas.
    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013 14:33:34:
    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    > Datum: 01.07.2013 14:41
    > Betreff: Problem to send DB characters - Remove Escape characters
    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    >
    >
    > Hi,
    >
    > I try to send chineese characters like
    >
    > when i view this on Iseries
    > i see
    >
    >
    >
    > So chineese characters 5075
    >
    > has a & , then this characters is remove for escape characters
    function
    > ( XmlEntityEncoder_encodeToStream)
    >
    > and then after the i_conv  function is wrong because a db character
    lost
    > one hexa decimal value.
    >
    > what can i do do prevent this ?????
    >
    > regards
    >
    > Gilles Renne
    > This message contains confidential information. To know more, please
    > click on the following link: [3]http://disclaimer.bureauveritas.com
    > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
    > [Bild entfernt]
    >
    -----------------------------------------------------------------------
    > This is the FTPAPI mailing list.  To unsubscribe, please go to:
    > [4]http://www.scottklement.com/mailman/listinfo/ftpapi
    >
    -----------------------------------------------------------------------
    --
    IMPORTANT NOTICE:
    This email is confidential, may be legally privileged, and is for the
    intended recipient only. Access, disclosure, copying, distribution, or
    reliance on any of it by anyone else is prohibited and may be a
    criminal
    offence. Please delete if obtained in error and email confirmation to
    the
    sender.
    -------------- next part --------------
      Gilles,
      I added some procedures to module WSDL2R98 of service program
      WSDL2RPGRT to control the integrated XML entity encoder. Replace the
      existing source members and reinstall WSDL2RPG if you want to use the
      new procedures:
        //  Enables/disables the integrated XML entity encode.
        XmlEntityEncoder_setEnabled(isEnabled)
        //  Returns the enabled status of the integrated XML entity
    encoder.
        isEnabled = XmlEntityEncoder_isEnabled()
        //  Encodes XML entities up to 64k (V5R4 and lower).
        encoded = XmlEntityEncoder_encode(i_value)
        //  Encodes XML entities up to 1MB (V6R1 or higher).
        encoded = XmlEntityEncoder_encodeLarge(i_value)
        //  Encodes XML entities up to 16MB (V6R1 or higher).
        XmlEntityEncoder_encodeV6(
           i_value: %addr(encoded): %addr(encoded: *DATA): %size(encoded));
      Regards,
      Thomas.
      ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013 14:33:34:
      > Von: gilles.renne@xxxxxxxxxxxxxxxxx
      > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      > Datum: 01.07.2013 14:41
      > Betreff: Problem to send DB characters - Remove Escape characters
      > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      >
      >
      > Hi,
      >
      > I try to send chineese characters like
      >
      > when i view this on Iseries
      > i see
      >
      >
      >
      > So chineese characters 5075
      >
      > has a & , then this characters is remove for escape characters
      function
      > ( XmlEntityEncoder_encodeToStream)
      >
      > and then after the i_conv  function is wrong because a db character
      lost
      > one hexa decimal value.
      >
      > what can i do do prevent this ?????
      >
      > regards
      >
      > Gilles Renne
      > This message contains confidential information. To know more,
    please
      > click on the following link:
    [1][5]http://disclaimer.bureauveritas.com
      > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
      > [Bild entfernt]
      >

    -----------------------------------------------------------------------
      > This is the FTPAPI mailing list.  To unsubscribe, please go to:
      > [2][6]http://www.scottklement.com/mailman/listinfo/ftpapi
      >

    -----------------------------------------------------------------------
      --
      IMPORTANT NOTICE:
      This email is confidential, may be legally privileged, and is for the
      intended recipient only. Access, disclosure, copying, distribution,
    or
      reliance on any of it by anyone else is prohibited and may be a
      criminal
      offence. Please delete if obtained in error and email confirmation to
      the sender.
    References
      1. [7]http://disclaimer.bureauveritas.com/
      2. [8]http://www.scottklement.com/mailman/listinfo/ftpapi
    -------------- next part --------------
    A non-text attachment was scrubbed...
    Name: Patch_XmlEncoder_for_v1.15.5+.zip
    Type: application/zip
    Size: 31638 bytes
    Desc: not available
    URL: <
    [9]http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97d
    e9/attachment.zip
    >
    ------------------------------
    -----------------------------------------------------------------------
    This is the FTPAPI mailing list digest.  To unsubscribe, go to:
    [10]http://www.scottklement.com/mailman/listinfo/ftpapi
    -----------------------------------------------------------------------
    End of Ftpapi Digest, Vol 81, Issue 3
    *************************************
    This message contains confidential information. To know more, please
    click on the following link: [11]http://disclaimer.bureauveritas.com
    -------------- next part --------------
      hi
      i have a compilation error
      USR50203 is not find
      regards
      Gilles Renne
      Inactive hide details for ftpapi-request---02/07/2013
      11:39:55---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
      ftpapi-request---02/07/2013
      11:39:55---ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
      ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
          Envoy? par : ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
          02/07/2013 11:12
               Veuillez r?pondre ?
          ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      A
           ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      cc
      Objet
           Ftpapi Digest, Vol 81, Issue 3
      R?f.
      Send Ftpapi mailing list submissions to
      ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      To subscribe or unsubscribe via the World Wide Web, visit
      [1][12]http://scottklement.com/mailman/listinfo/ftpapi
      or, via email, send a message with subject or body 'help' to
      ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
      You can reach the person managing the list at
      ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
      When replying, please edit your Subject line so it is more specific
      than "Re: Contents of Ftpapi digest..."
      Today's Topics:
        1. Re: Problem to send DB characters - Remove Escape characters
           (thomas.raddatz@xxxxxx)

    ----------------------------------------------------------------------
      Message: 1
      Date: Tue, 2 Jul 2013 11:12:41 +0200
      From: thomas.raddatz@xxxxxx
      To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      Subject: Re: Problem to send DB characters - Remove Escape characters
      Message-ID:
      <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
      Content-Type: text/plain; charset="us-ascii"
      Gilles,
      I added some procedures to module WSDL2R98 of service program
      WSDL2RPGRT
      to control the integrated XML entity encoder. Replace the existing
      source
      members and reinstall WSDL2RPG if you want to use the new procedures:
       //  Enables/disables the integrated XML entity encode.
       XmlEntityEncoder_setEnabled(isEnabled)
       //  Returns the enabled status of the integrated XML entity encoder.
       isEnabled = XmlEntityEncoder_isEnabled()
       //  Encodes XML entities up to 64k (V5R4 and lower).
       encoded = XmlEntityEncoder_encode(i_value)
       //  Encodes XML entities up to 1MB (V6R1 or higher).
       encoded = XmlEntityEncoder_encodeLarge(i_value)
       //  Encodes XML entities up to 16MB (V6R1 or higher).
       XmlEntityEncoder_encodeV6(
          i_value: %addr(encoded): %addr(encoded: *DATA): %size(encoded));
      Regards,
      Thomas.
      ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013 14:33:34:
      > Von: gilles.renne@xxxxxxxxxxxxxxxxx
      > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      > Datum: 01.07.2013 14:41
      > Betreff: Problem to send DB characters - Remove Escape characters
      > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      >
      >
      > Hi,
      >
      > I try to send chineese characters like
      >
      > when i view this on Iseries
      > i see
      >
      >
      >
      > So chineese characters 5075
      >
      > has a & , then this characters is remove for escape characters
      function
      > ( XmlEntityEncoder_encodeToStream)
      >
      > and then after the i_conv  function is wrong because a db character
      lost
      > one hexa decimal value.
      >
      > what can i do do prevent this ?????
      >
      > regards
      >
      > Gilles Renne
      > This message contains confidential information. To know more,
    please
      > click on the following link:
    [2][13]http://disclaimer.bureauveritas.com
      > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
      > [Bild entfernt]
      >

    -----------------------------------------------------------------------
      > This is the FTPAPI mailing list.  To unsubscribe, please go to:
      > [3][14]http://www.scottklement.com/mailman/listinfo/ftpapi
      >

    -----------------------------------------------------------------------
      --
      IMPORTANT NOTICE:
      This email is confidential, may be legally privileged, and is for the
      intended recipient only. Access, disclosure, copying, distribution,
    or
      reliance on any of it by anyone else is prohibited and may be a
      criminal
      offence. Please delete if obtained in error and email confirmation to
      the sender.
      -------------- next part --------------
        Gilles,
        I added some procedures to module WSDL2R98 of service program
        WSDL2RPGRT to control the integrated XML entity encoder. Replace
    the
        existing source members and reinstall WSDL2RPG if you want to use
    the
        new procedures:
          //  Enables/disables the integrated XML entity encode.
          XmlEntityEncoder_setEnabled(isEnabled)
          //  Returns the enabled status of the integrated XML entity
      encoder.
          isEnabled = XmlEntityEncoder_isEnabled()
          //  Encodes XML entities up to 64k (V5R4 and lower).
          encoded = XmlEntityEncoder_encode(i_value)
          //  Encodes XML entities up to 1MB (V6R1 or higher).
          encoded = XmlEntityEncoder_encodeLarge(i_value)
          //  Encodes XML entities up to 16MB (V6R1 or higher).
          XmlEntityEncoder_encodeV6(
             i_value: %addr(encoded): %addr(encoded: *DATA):
    %size(encoded));
        Regards,
        Thomas.
        ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
    14:33:34:
        > Von: gilles.renne@xxxxxxxxxxxxxxxxx
        > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
        > Datum: 01.07.2013 14:41
        > Betreff: Problem to send DB characters - Remove Escape characters
        > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
        >
        >
        > Hi,
        >
        > I try to send chineese characters like
        >
        > when i view this on Iseries
        > i see
        >
        >
        >
        > So chineese characters 5075
        >
        > has a & , then this characters is remove for escape characters
        function
        > ( XmlEntityEncoder_encodeToStream)
        >
        > and then after the i_conv  function is wrong because a db
    character
        lost
        > one hexa decimal value.
        >
        > what can i do do prevent this ?????
        >
        > regards
        >
        > Gilles Renne
        > This message contains confidential information. To know more,
      please
        > click on the following link:
      [1][4][15]http://disclaimer.bureauveritas.com
        > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
        > [Bild entfernt]
        >

    -----------------------------------------------------------------------
        > This is the FTPAPI mailing list.  To unsubscribe, please go to:
        > [2][5][16]http://www.scottklement.com/mailman/listinfo/ftpapi
        >

    -----------------------------------------------------------------------
        --
        IMPORTANT NOTICE:
        This email is confidential, may be legally privileged, and is for
    the
        intended recipient only. Access, disclosure, copying, distribution,
      or
        reliance on any of it by anyone else is prohibited and may be a
        criminal
        offence. Please delete if obtained in error and email confirmation
    to
        the sender.
      References
        1. [6][17]http://disclaimer.bureauveritas.com/
        2. [7][18]http://www.scottklement.com/mailman/listinfo/ftpapi
      -------------- next part --------------
      A non-text attachment was scrubbed...
      Name: Patch_XmlEncoder_for_v1.15.5+.zip
      Type: application/zip
      Size: 31638 bytes
      Desc: not available
      URL:

    <[8][19]http://scottklement.com/pipermail/ftpapi/attachments/20130702/f
    ea97
      de9/attachment.zip>
      ------------------------------

    -----------------------------------------------------------------------
      This is the FTPAPI mailing list digest.  To unsubscribe, go to:
      [9][20]http://www.scottklement.com/mailman/listinfo/ftpapi

    -----------------------------------------------------------------------
      End of Ftpapi Digest, Vol 81, Issue 3
      *************************************
      This message contains confidential information. To know more, please
      click on the following link: [21]http://disclaimer.bureauveritas.com
    References
      1. [22]http://scottklement.com/mailman/listinfo/ftpapi
      2. [23]http://disclaimer.bureauveritas.com/
      3. [24]http://www.scottklement.com/mailman/listinfo/ftpapi
      4. [25]http://disclaimer.bureauveritas.com/
      5. [26]http://www.scottklement.com/mailman/listinfo/ftpapi
      6. [27]http://disclaimer.bureauveritas.com/
      7. [28]http://www.scottklement.com/mailman/listinfo/ftpapi
      8.
    [29]http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97
    de9/attachment.zip
      9. [30]http://www.scottklement.com/mailman/listinfo/ftpapi
    -------------- next part --------------
    A non-text attachment was scrubbed...
    Name: graycol.gif
    Type: image/gif
    Size: 105 bytes
    Desc: not available
    URL:
    <[31]http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
    210e/attachment.gif>
    -------------- next part --------------
    A non-text attachment was scrubbed...
    Name: pic06064.gif
    Type: image/gif
    Size: 1255 bytes
    Desc: not available
    URL:
    <[32]http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
    210e/attachment-0001.gif>
    -------------- next part --------------
    A non-text attachment was scrubbed...
    Name: ecblank.gif
    Type: image/gif
    Size: 45 bytes
    Desc: not available
    URL:
    <[33]http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279
    210e/attachment-0002.gif>
    ------------------------------
    Message: 2
    Date: Tue, 2 Jul 2013 13:14:33 +0200
    From: thomas.raddatz@xxxxxx
    To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    Subject: Re: RE Ftpapi Digest, Vol 81, Issue 3
    Message-ID:
    <OFE220083F.9F11B05A-ONC1257B9C.003D4C5B-C1257B9C.003DC1F8@xxxxxx>
    Content-Type: text/plain; charset="iso-8859-1"
    OK. That means that you have WSDL2RPG v1.15.5 or lower, because message
    description USR5020 has been changed with 1.15.6, right?
    Please replace member USR5020 with the attached one and try to compile
    again.
    Thomas.
    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 02.07.2013 12:56:21:
    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    > Kopie: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    > Datum: 02.07.2013 13:05
    > Betreff: RE Ftpapi Digest, Vol 81, Issue 3
    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    >
    >
    > hi
    >
    > i have a compilation error
    > USR50203 is not find
    >
    >
    > regards
    >
    > Gilles Renne
    >
    >
    >
    >
    >
    >              ftpapi-request@li
    >              sts.scottklement.
    >              com A
    >              Envoy? par :              ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    >              ftpapi-bounces@li cc
    >              sts.scottklement.
    >              com Objet
    >                                        Ftpapi Digest, Vol 81, Issue 3
    > R?f.
    >              02/07/2013 11:12
    >
    >
    >              Veuillez r?pondre
    >                      ?
    >              ftpapi@xxxxxxxxxx
    >                tklement.com
    >
    >
    >
    >
    >
    >
    > Send Ftpapi mailing list submissions to
    >        ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    >
    > To subscribe or unsubscribe via the World Wide Web, visit
    >        [34]http://scottklement.com/mailman/listinfo/ftpapi
    > or, via email, send a message with subject or body 'help' to
    >        ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
    >
    > You can reach the person managing the list at
    >        ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
    >
    > When replying, please edit your Subject line so it is more specific
    > than "Re: Contents of Ftpapi digest..."
    >
    >
    > Today's Topics:
    >
    >    1. Re: Problem to send DB characters - Remove Escape characters
    >       (thomas.raddatz@xxxxxx)
    >
    >
    >
    ----------------------------------------------------------------------
    >
    > Message: 1
    > Date: Tue, 2 Jul 2013 11:12:41 +0200
    > From: thomas.raddatz@xxxxxx
    > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
    > Subject: Re: Problem to send DB characters - Remove Escape characters
    > Message-ID:
    >
    > <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
    > Content-Type: text/plain; charset="us-ascii"
    >
    >
    > Gilles,
    >
    > I added some procedures to module WSDL2R98 of service program
    WSDL2RPGRT
    > to control the integrated XML entity encoder. Replace the existing
    source
    > members and reinstall WSDL2RPG if you want to use the new procedures:
    >
    >
    >   //  Enables/disables the integrated XML entity encode.
    >   XmlEntityEncoder_setEnabled(isEnabled)
    >
    >
    >   //  Returns the enabled status of the integrated XML entity
    encoder.
    >   isEnabled = XmlEntityEncoder_isEnabled()
    >
    >
    >   //  Encodes XML entities up to 64k (V5R4 and lower).
    >   encoded = XmlEntityEncoder_encode(i_value)
    >
    >
    >   //  Encodes XML entities up to 1MB (V6R1 or higher).
    >   encoded = XmlEntityEncoder_encodeLarge(i_value)
    >
    >
    >   //  Encodes XML entities up to 16MB (V6R1 or higher).
    >   XmlEntityEncoder_encodeV6(
    >      i_value: %addr(encoded): %addr(encoded: *DATA): %size(encoded));
    >
    >
    > Regards,
    >
    >
    > Thomas.
    >
    >
    >
    > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013 14:33:34:
    >
    > > Von: gilles.renne@xxxxxxxxxxxxxxxxx
    > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    > > Datum: 01.07.2013 14:41
    > > Betreff: Problem to send DB characters - Remove Escape characters
    > > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    > >
    > >
    > > Hi,
    > >
    > > I try to send chineese characters like
    > >
    > > when i view this on Iseries
    > > i see
    > >
    > >
    > >
    > > So chineese characters 5075
    > >
    > > has a & , then this characters is remove for escape characters
    function
    > > ( XmlEntityEncoder_encodeToStream)
    > >
    > > and then after the i_conv  function is wrong because a db character
    lost
    > > one hexa decimal value.
    > >
    > > what can i do do prevent this ?????
    > >
    > > regards
    > >
    > > Gilles Renne
    > > This message contains confidential information. To know more,
    please
    > > click on the following link:
    [35]http://disclaimer.bureauveritas.com
    > > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
    > > [Bild entfernt]
    > >
    -----------------------------------------------------------------------
    > > This is the FTPAPI mailing list.  To unsubscribe, please go to:
    > > [36]http://www.scottklement.com/mailman/listinfo/ftpapi
    > >
    -----------------------------------------------------------------------
    >
    >
    > --
    > IMPORTANT NOTICE:
    > This email is confidential, may be legally privileged, and is for the
    > intended recipient only. Access, disclosure, copying, distribution,
    or
    > reliance on any of it by anyone else is prohibited and may be a
    criminal
    > offence. Please delete if obtained in error and email confirmation to
    the
    > sender.
    > -------------- next part --------------
    >    Gilles,
    >    I added some procedures to module WSDL2R98 of service program
    >    WSDL2RPGRT to control the integrated XML entity encoder. Replace
    the
    >    existing source members and reinstall WSDL2RPG if you want to use
    the
    >    new procedures:
    >      //  Enables/disables the integrated XML entity encode.
    >      XmlEntityEncoder_setEnabled(isEnabled)
    >      //  Returns the enabled status of the integrated XML entity
    encoder.
    >      isEnabled = XmlEntityEncoder_isEnabled()
    >      //  Encodes XML entities up to 64k (V5R4 and lower).
    >      encoded = XmlEntityEncoder_encode(i_value)
    >      //  Encodes XML entities up to 1MB (V6R1 or highe r).
    >      encoded = XmlEntityEncoder_encodeLarge(i_value)
    >      //  Encodes XML entities up to 16MB (V6R1 or higher).
    >      XmlEntityEncoder_encodeV6(
    >         i_value: %addr(encoded): %addr(encoded: *DATA):
    %size(encoded));
    >    Regards,
    >    Thomas.
    >    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
    14:33:34:
    >    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
    >    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
    >    > Datum: 01.07.2013 14:41
    >    > Betreff: Problem to send DB characters - Remove Escape
    characters
    >    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
    >    >
    >    >
    >    > Hi,
    >    >
    >    > I try to send chineese characters like
    >    >
    >    > when i view this on Iseries
    >    > i see
    >    >
    >    >
    >    >
    >    > So chineese characters 5075
    >    >
    >    > has a & , then this characters is remove for escape characters
    >    function
    >    > ( XmlEntityEncoder_encodeToStream)
    >    >
    >    > and then after the i_conv  function is wrong because a db
    character
    >    lost
    >    > one hexa decimal value.
    >    >
    >    > what can i do do prevent this ?????
    >    >
    >    > regards
    >    >
    >    > Gilles Renne
    >    > This message contains confidential information. To know more,
    please
    >    > click on the following link:
    [1][37]http://disclaimer.bureauveritas.com
    >    > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
    >    > [Bild entfernt]
    >    >
    >
    -----------------------------------------------------------------------
    >    > This is the FTPAPI mailing list.  To unsubscribe, please go to:
    >    > [2][38]http://www.scottklement.com/mailman/listinfo/ftpapi
    >    >
    >
    -----------------------------------------------------------------------
    >
    >    --
    >    IMPORTANT NOTICE:
    >    This email is confidential, may be legally privileged, and is for
    the
    >    intended recipient only. Access, disclosure, copying,
    distribution,
    or
    >    reliance on any of it by anyone else is prohibited and may be a
    >    criminal
    >    offence. Please delete if obtained in error and email confirmation
    to
    >    the sender.
    >
    > References
    >
    >    1. [39]http://disclaimer.bureauveritas.com/
    >    2. [40]http://www.scottklement.com/mailman/listinfo/ftpapi
    > -------------- next part --------------
    > A non-text attachment was scrubbed...
    > Name: Patch_XmlEncoder_for_v1.15.5+.zip
    > Type: application/zip
    > Size: 31638 bytes
    > Desc: not available
    > URL: <
    > [41]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
    > fea97de9/attachment.zip
    > >
    >
    > ------------------------------
    >
    >
    -----------------------------------------------------------------------
    > This is the FTPAPI mailing list digest.  To unsubscribe, go to:
    > [42]http://www.scottklement.com/mailman/listinfo/ftpapi
    >
    -----------------------------------------------------------------------
    >
    >
    > End of Ftpapi Digest, Vol 81, Issue 3
    > *************************************
    > This message contains confidential information. To know more, please
    > click on the following link: [43]http://disclaimer.bureauveritas.com
    > [Bild entfernt] [Bild entfernt] [Bild entfernt]
    >
    -----------------------------------------------------------------------
    > This is the FTPAPI mailing list.  To unsubscribe, please go to:
    > [44]http://www.scottklement.com/mailman/listinfo/ftpapi
    >
    -----------------------------------------------------------------------
    --
    IMPORTANT NOTICE:
    This email is confidential, may be legally privileged, and is for the
    intended recipient only. Access, disclosure, copying, distribution, or
    reliance on any of it by anyone else is prohibited and may be a
    criminal
    offence. Please delete if obtained in error and email confirmation to
    the sender.
    -------------- next part --------------
      OK. That means that you have WSDL2RPG v1.15.5 or lower, because
    message
      description USR5020 has been changed with 1.15.6, right?
      Please replace member USR5020 with the attached one and try to
    compile
      again.
      Thomas.
      ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 02.07.2013 12:56:21:
      > Von: gilles.renne@xxxxxxxxxxxxxxxxx
      > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      > Kopie: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      > Datum: 02.07.2013 13:05
      > Betreff: RE Ftpapi Digest, Vol 81, Issue 3
      > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      >
      >
      > hi
      >
      > i have a compilation error
      > USR50203 is not find
      >
      >
      > regards
      >
      > Gilles Renne
      >
      >
      >
      >
      >
      >              ftpapi-request@li
      >              sts.scottklement.
      >              com
          A
      >              Envoy? par :
    ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      >              ftpapi-bounces@li
         cc
      >              sts.scottklement.
      >              com
      Objet
      >                                        Ftpapi Digest, Vol 81, Issue
    3
      >
      R?f.
      >              02/07/2013 11:12
      >
      >
      >              Veuillez r?pondre
      >                      ?
      >              ftpapi@xxxxxxxxxx
      >                tklement.com
      >
      >
      >
      >
      >
      >
      > Send Ftpapi mailing list submissions to
      >        ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      >
      > To subscribe or unsubscribe via the World Wide Web, visit
      >        [1][45]http://scottklement.com/mailman/listinfo/ftpapi
      > or, via email, send a message with subject or body 'help' to
      >        ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
      >
      > You can reach the person managing the list at
      >        ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
      >
      > When replying, please edit your Subject line so it is more specific
      > than "Re: Contents of Ftpapi digest..."
      >
      >
      > Today's Topics:
      >
      >    1. Re: Problem to send DB characters - Remove Escape characters
      >       (thomas.raddatz@xxxxxx)
      >
      >
      >

    ----------------------------------------------------------------------
      >
      > Message: 1
      > Date: Tue, 2 Jul 2013 11:12:41 +0200
      > From: thomas.raddatz@xxxxxx
      > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
      > Subject: Re: Problem to send DB characters - Remove Escape
    characters
      > Message-ID:
      >
      > <OF93CBA716.D3999555-ONC1257B9C.00312B7E-C1257B9C.003299DF@xxxxxx>
      > Content-Type: text/plain; charset="us-ascii"
      >
      >
      > Gilles,
      >
      > I added some procedures to module WSDL2R98 of service program
      WSDL2RPGRT
      > to control the integrated XML entity encoder. Replace the existing
      source
      > members and reinstall WSDL2RPG if you want to use the new
    procedures:
      >
      >
      >   //  Enables/disables the integrated XML entity encode.
      >   XmlEntityEncoder_setEnabled(isEnabled)
      >
      >
      >   //  Returns the enabled status of the integrated XML entity
      encoder.
      >   isEnabled = XmlEntityEncoder_isEnabled()
      >
      >
      >   //  Encodes XML entities up to 64k (V5R4 and lower).
      >   encoded = XmlEntityEncoder_encode(i_value)
      >
      >
      >   //  Encodes XML entities up to 1MB (V6R1 or higher).
      >   encoded = XmlEntityEncoder_encodeLarge(i_value)
      >
      >
      >   //  Encodes XML entities up to 16MB (V6R1 or higher).
      >   XmlEntityEncoder_encodeV6(
      >      i_value: %addr(encoded): %addr(encoded: *DATA):
    %size(encoded));
      >
      >
      > Regards,
      >
      >
      > Thomas.
      >
      >
      >
      > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
    14:33:34:
      >
      > > Von: gilles.renne@xxxxxxxxxxxxxxxxx
      > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      > > Datum: 01.07.2013 14:41
      > > Betreff: Problem to send DB characters - Remove Escape characters
      > > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      > >
      > >
      > > Hi,
      > >
      > > I try to send chineese characters like
      > >
      > > when i view this on Iseries
      > > i see
      > >
      > >
      > >
      > > So chineese characters 5075
      > >
      > > has a & , then this characters is remove for escape characters
      function
      > > ( XmlEntityEncoder_encodeToStream)
      > >
      > > and then after the i_conv  function is wrong because a db
    character
      lost
      > > one hexa decimal value.
      > >
      > > what can i do do prevent this ?????
      > >
      > > regards
      > >
      > > Gilles Renne
      > > This message contains confidential information. To know more,
      please
      > > click on the following link:
    [2][46]http://disclaimer.bureauveritas.com
      > > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild entfernt]
      > > [Bild entfernt]
      > >

    -----------------------------------------------------------------------
      > > This is the FTPAPI mailing list.  To unsubscribe, please go to:
      > > [3][47]http://www.scottklement.com/mailman/listinfo/ftpapi
      > >

    -----------------------------------------------------------------------
      >
      >
      > --
      > IMPORTANT NOTICE:
      > This email is confidential, may be legally privileged, and is for
    the
      > intended recipient only. Access, disclosure, copying, distribution,
      or
      > reliance on any of it by anyone else is prohibited and may be a
      criminal
      > offence. Please delete if obtained in error and email confirmation
    to
      the
      > sender.
      > -------------- next part --------------
      >    Gilles,
      >    I added some procedures to module WSDL2R98 of service program
      >    WSDL2RPGRT to control the integrated XML entity encoder. Replace
      the
      >    existing source members and reinstall WSDL2RPG if you want to
    use
      the
      >    new procedures:
      >      //  Enables/disables the integrated XML entity encode.
      >      XmlEntityEncoder_setEnabled(isEnabled)
      >      //  Returns the enabled status of the integrated XML entity
      encoder.
      >      isEnabled = XmlEntityEncoder_isEnabled()
      >      //  Encodes XML entities up to 64k (V5R4 and lower).
      >      encoded = XmlEntityEncoder_encode(i_value)
      >      //  Encodes XML entities up to 1MB (V6R1 or higher).
      >      encoded = XmlEntityEncoder_encodeLarge(i_value)
      >      //  Encodes XML entities up to 16MB (V6R1 or higher).
      >      XmlEntityEncoder_encodeV6(
      >         i_value: %addr(encoded): %addr(encoded: *DATA):
      %size(encoded));
      >    Regards,
      >    Thomas.
      >    ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 01.07.2013
      14:33:34:
      >    > Von: gilles.renne@xxxxxxxxxxxxxxxxx
      >    > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
      >    > Datum: 01.07.2013 14:41
      >    > Betreff: Problem to send DB characters - Remove Escape
      characters
      >    > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
      >    >
      >    >
      >    > Hi,
      >    >
      >    > I try to send chineese characters like
      >    >
      >    > when i view this on Iseries
      >    > i see
      >    >
      >    >
      >    >
      >    > So chineese characters 5075
      >    >
      >    > has a & , then this characters is remove for escape characters
      >    function
      >    > ( XmlEntityEncoder_encodeToStream)
      >    >
      >    > and then after the i_conv  function is wrong because a db
      character
      >    lost
      >    > one hexa decimal value.
      >    >
      >    > what can i do do prevent this ?????
      >    >
      >    > regards
      >    >
      >    > Gilles Renne
      >    > This message contains confidential information. To know more,
      please
      >    > click on the following link:
      [1][4][48]http://disclaimer.bureauveritas.com
      >    > [Bild entfernt] [Bild entfernt] [Bild entfernt] [Bild
    entfernt]
      >    > [Bild entfernt]
      >    >
      >

    -----------------------------------------------------------------------
      >    > This is the FTPAPI mailing list.  To unsubscribe, please go
    to:
      >    > [2][5][49]http://www.scottklement.com/mailman/listinfo/ftpapi
      >    >
      >

    -----------------------------------------------------------------------
      >
      >    --
      >    IMPORTANT NOTICE:
      >    This email is confidential, may be legally privileged, and is
    for
      the
      >    intended recipient only. Access, disclosure, copying,
      distribution, or
      >    reliance on any of it by anyone else is prohibited and may be a
      >    criminal
      >    offence. Please delete if obtained in error and email
    confirmation
      to
      >    the sender.
      >
      > References
      >
      >    1. [6][50]http://disclaimer.bureauveritas.com/
      >    2. [7][51]http://www.scottklement.com/mailman/listinfo/ftpapi
      > -------------- next part --------------
      > A non-text attachment was scrubbed...
      > Name: Patch_XmlEncoder_for_v1.15.5+.zip
      > Type: application/zip
      > Size: 31638 bytes
      > Desc: not available
      > URL: <
      >
    [8][52]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
      > fea97de9/attachment.zip
      > >
      >
      > ------------------------------
      >
      >

    -----------------------------------------------------------------------
      > This is the FTPAPI mailing list digest.  To unsubscribe, go to:
      > [9][53]http://www.scottklement.com/mailman/listinfo/ftpapi
      >

    -----------------------------------------------------------------------
      >
      >
      > End of Ftpapi Digest, Vol 81, Issue 3
      > *************************************
      > This message contains confidential information. To know more,
    please
      > click on the following link:
    [10][54]http://disclaimer.bureauveritas.com
      > [Bild entfernt] [Bild entfernt] [Bild entfernt]
      >

    -----------------------------------------------------------------------
      > This is the FTPAPI mailing list.  To unsubscribe, please go to:
      > [11][55]http://www.scottklement.com/mailman/listinfo/ftpapi
      >

    -----------------------------------------------------------------------
      --
      IMPORTANT NOTICE:
      This email is confidential, may be legally privileged, and is for the
      intended recipient only. Access, disclosure, copying, distribution,
    or
      reliance on any of it by anyone else is prohibited and may be a
      criminal
      offence. Please delete if obtained in error and email confirmation to
      the sender.
    References
      1. [56]http://scottklement.com/mailman/listinfo/ftpapi
      2. [57]http://disclaimer.bureauveritas.com/
      3. [58]http://www.scottklement.com/mailman/listinfo/ftpapi
      4. [59]http://disclaimer.bureauveritas.com/
      5. [60]http://www.scottklement.com/mailman/listinfo/ftpapi
      6. [61]http://disclaimer.bureauveritas.com/
      7. [62]http://www.scottklement.com/mailman/listinfo/ftpapi
      8. [63]http://scottklement.com/pipermail/ftpapi/attachments/20130702/
      9. [64]http://www.scottklement.com/mailman/listinfo/ftpapi
     10. [65]http://disclaimer.bureauveritas.com/
     11. [66]http://www.scottklement.com/mailman/listinfo/ftpapi
    -------------- next part --------------
    A non-text attachment was scrubbed...
    Name: USR5020.rpgle
    Type: application/octet-stream
    Size: 468 bytes
    Desc: not available
    URL:
    <[67]http://scottklement.com/pipermail/ftpapi/attachments/20130702/26ba
    65e4/attachment.obj>
    ------------------------------
    -----------------------------------------------------------------------
    This is the FTPAPI mailing list digest.  To unsubscribe, go to:
    [68]http://www.scottklement.com/mailman/listinfo/ftpapi
    -----------------------------------------------------------------------
    End of Ftpapi Digest, Vol 81, Issue 4
    *************************************
    This message contains confidential information. To know more, please
    click on the following link: http://disclaimer.bureauveritas.com

References

    1. http://scottklement.com/mailman/listinfo/ftpapi
    2. http://scottklement.com/mailman/listinfo/ftpapi
    3. http://disclaimer.bureauveritas.com/
    4. http://www.scottklement.com/mailman/listinfo/ftpapi
    5. http://disclaimer.bureauveritas.com/
    6. http://www.scottklement.com/mailman/listinfo/ftpapi
    7. http://disclaimer.bureauveritas.com/
    8. http://www.scottklement.com/mailman/listinfo/ftpapi
    9. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97de9/attachment.zip
   10. http://www.scottklement.com/mailman/listinfo/ftpapi
   11. http://disclaimer.bureauveritas.com/
   12. http://scottklement.com/mailman/listinfo/ftpapi
   13. http://disclaimer.bureauveritas.com/
   14. http://www.scottklement.com/mailman/listinfo/ftpapi
   15. http://disclaimer.bureauveritas.com/
   16. http://www.scottklement.com/mailman/listinfo/ftpapi
   17. http://disclaimer.bureauveritas.com/
   18. http://www.scottklement.com/mailman/listinfo/ftpapi
   19. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97
   20. http://www.scottklement.com/mailman/listinfo/ftpapi
   21. http://disclaimer.bureauveritas.com/
   22. http://scottklement.com/mailman/listinfo/ftpapi
   23. http://disclaimer.bureauveritas.com/
   24. http://www.scottklement.com/mailman/listinfo/ftpapi
   25. http://disclaimer.bureauveritas.com/
   26. http://www.scottklement.com/mailman/listinfo/ftpapi
   27. http://disclaimer.bureauveritas.com/
   28. http://www.scottklement.com/mailman/listinfo/ftpapi
   29. http://scottklement.com/pipermail/ftpapi/attachments/20130702/fea97de9/attachment.zip
   30. http://www.scottklement.com/mailman/listinfo/ftpapi
   31. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279210e/attachment.gif
   32. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279210e/attachment-0001.gif
   33. http://scottklement.com/pipermail/ftpapi/attachments/20130702/9279210e/attachment-0002.gif
   34. http://scottklement.com/mailman/listinfo/ftpapi
   35. http://disclaimer.bureauveritas.com/
   36. http://www.scottklement.com/mailman/listinfo/ftpapi
   37. http://disclaimer.bureauveritas.com/
   38. http://www.scottklement.com/mailman/listinfo/ftpapi
   39. http://disclaimer.bureauveritas.com/
   40. http://www.scottklement.com/mailman/listinfo/ftpapi
   41. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   42. http://www.scottklement.com/mailman/listinfo/ftpapi
   43. http://disclaimer.bureauveritas.com/
   44. http://www.scottklement.com/mailman/listinfo/ftpapi
   45. http://scottklement.com/mailman/listinfo/ftpapi
   46. http://disclaimer.bureauveritas.com/
   47. http://www.scottklement.com/mailman/listinfo/ftpapi
   48. http://disclaimer.bureauveritas.com/
   49. http://www.scottklement.com/mailman/listinfo/ftpapi
   50. http://disclaimer.bureauveritas.com/
   51. http://www.scottklement.com/mailman/listinfo/ftpapi
   52. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   53. http://www.scottklement.com/mailman/listinfo/ftpapi
   54. http://disclaimer.bureauveritas.com/
   55. http://www.scottklement.com/mailman/listinfo/ftpapi
   56. http://scottklement.com/mailman/listinfo/ftpapi
   57. http://disclaimer.bureauveritas.com/
   58. http://www.scottklement.com/mailman/listinfo/ftpapi
   59. http://disclaimer.bureauveritas.com/
   60. http://www.scottklement.com/mailman/listinfo/ftpapi
   61. http://disclaimer.bureauveritas.com/
   62. http://www.scottklement.com/mailman/listinfo/ftpapi
   63. http://scottklement.com/pipermail/ftpapi/attachments/20130702/
   64. http://www.scottklement.com/mailman/listinfo/ftpapi
   65. http://disclaimer.bureauveritas.com/
   66. http://www.scottklement.com/mailman/listinfo/ftpapi
   67. http://scottklement.com/pipermail/ftpapi/attachments/20130702/26ba65e4/attachment.obj
   68. http://www.scottklement.com/mailman/listinfo/ftpapi



-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------