[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FTP API Transfer Hanging
We are continuing to experience hanging transfers with the FTP API. I
can't see anything that looks suspicious coming out of the job log, but
I've attached the log and the call stack from the latest failure. The
last entry in the log shows where the process is hanging. If this is
network related, is there a way we can set a timeout for the transfer?
Currently when we have a problem, the job just sits indefinitely
waiting for the transfer to complete. Is there a way we can make the
FTP API timeout after say 10 minutes so that we can then handle the
failure programmatically?
Thanks.
Print Key Output Page 1
5770SS1 V7R2M0 140418 PDI001 03/22/16 08:50:17
Display Device . . . . . : HAMISR1A1
User . . . . . . . . . . : SCOTT
Display Call Stack
System: PDI001
Job: FTPHYVEPDI User: CISOPR Number: 561651
Thread: 000000A9
Type Program Statement Procedure
1 QCMD QSYS /01C8
OPCL225B PROGRAMS _CL_PEP
OPCL225B PROGRAMS 1700 OPCL225B
OPRP225 PROGRAMS _QRNP_PEP_OPRP225
OPRP225 PROGRAMS 14500 OPRP225
FTPAPIR4 SYSMODS 4826 FTP_GET
FTPAPIR4 SYSMODS 4962 FTP_GETRAW
FTPAPIR4 SYSMODS 6000 GET_BLOCK
QSOSRV1 QSYS 16 accept
Bottom
F3=Exit F5=Refresh F11=Display activation group F12=Cancel
F16=Job menu F17=Top F18=Bottom F21=Include F22=Display entire field
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 1
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPF1124 Information 00 03/22/16 07:30:13.585119 QWTPIIPP QSYS 04C9 *EXT *N
Message . . . . : Job 561651/CISOPR/FTPHYVEPDI started on 03/22/16 at
07:30:13 in subsystem QSYSWRK in QSYS. Job entered system on 03/22/16 at
07:30:13.
CPI1125 Information 00 03/22/16 07:30:13.585374 QWTPCRJA QSYS 0110 *EXT *N
Message . . . . : Job 561651/CISOPR/FTPHYVEPDI submitted.
Cause . . . . . : Job 561651/CISOPR/FTPHYVEPDI submitted to job queue
QSYSNOMAX in QSYS from job 561325/RICH/DRESRE1E1. Job
561651/CISOPR/FTPHYVEPDI was started using the Submit Job (SBMJOB) command
with the following job attributes: JOBPTY(5) OUTPTY(5) PRTTXT()
RTGDTA(QCMDB) SYSLIBL(SYSMODS QSYS QSYS2 QHLPSYS QUSRSYS)
CURLIB(FILE0256) INLLIBL(FILE0256 PROGRAMS QGPL QTEMP JRN)
INLASPGRP(*NONE) LOG(4 00 *NOLIST) LOGCLPGM(*NO) LOGOUTPUT(*JOBEND)
OUTQ(QGPL/RICH) PRTDEV(P1) INQMSGRPY(*RQD) HOLD(*NO) DATE(*SYSVAL)
SWS(00000000) MSGQ(QUSRSYS/RICH) CCSID(37) SRTSEQ(*N/*HEX) LANGID(ENU)
CNTRYID(US) JOBMSGQMX(50) JOBMSGQFL(*PRTWRAP) ALWMLTTHD(*NO) SPLFACN(*KEEP)
ACGCDE().
*NONE Request 03/22/16 07:30:13.586909 QWTSCSBJ *N QCMD QSYS 0195
From user . . . . . . . . . : RICH
Message . . . . : -CALL PGM(OPCL225B)
CPF9897 Diagnostic 40 03/22/16 07:30:13.916180 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 220 Microsoft FTP Service
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.916217 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > USER hy-vee\pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.956557 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 331 Password required
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.956594 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 2
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PASS **********
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.970225 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 230 User logged in.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.970317 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > CWD outbound
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.984162 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 250 CWD command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.984207 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE A
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.994132 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to A.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:13.994301 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 3
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,58,13
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.019026 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.019069 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > NLST Order*.*
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.039820 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.040580 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 226 Transfer complete.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.040617 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE A
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.050215 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 4
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to A.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.058095 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,215,86
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.079555 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.079594 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > NLST Order*.*
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.121238 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.122009 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 226 Transfer complete.
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 5
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.146093 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > SIZE Order1018C608130.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.191784 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 213 5590
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.309801 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE I
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.327435 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to I.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.327621 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,250,29
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.341368 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 6
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.341406 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > RETR Order1018C608130.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.369632 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:14.371871 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 226 Transfer complete.
Cause . . . . . : No additional online help information is available.
CPCA081 Completion 00 03/22/16 07:30:14.615013 QP0LCCMN QSYS *STMT OPCL226 PROGRAMS *STMT
From module . . . . . . . . : QP0LCCMN
From procedure . . . . . . : Qp0lCmnSnd__FPcT1iN21T3
Statement . . . . . . . . . : 10
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 1500
Message . . . . : Stream file copied to object.
Cause . . . . . : Stream file /CARS/Inbound/Orders/Order1018C608130.pdi was
successfully copied to object
/QSYS.LIB/FILE0256.LIB/OPPF008.FILE/OPPF008.MBR in CCSID (Coded Character
Set Identifier) 37.
CPC3101 Completion 00 03/22/16 07:30:14.722404 QDBCLRPF QSYS 0263 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2000
Message . . . . : Member OPPF009 file OPPF009 in FILE0256 cleared.
CPF2105 Escape 40 03/22/16 07:30:14.801268 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2400
Message . . . . : Object OPPF50 in QTEMP type *FILE not found.
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 7
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Cause . . . . . : No object was found for the name or type specified.
Recovery . . . : Specify the correct name or type of the object. Then try
the request again.
CPI2101 Information 00 03/22/16 07:30:14.906784 QLICRDUP QSYS 0989 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
Message . . . . : Object OPPF50 in QTEMP type *FILE created.
CPC2130 Completion 00 03/22/16 07:30:14.906936 QLICRDUP QSYS 02A4 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
Message . . . . : 1 objects duplicated.
Cause . . . . . : All the objects with supported object types specified on
the Create Duplicate Object (CRTDUPOBJ) command were duplicated. See low
level messages to determine if any objects were not duplicated.
CPF4028 Diagnostic 10 03/22/16 07:30:15.009145 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
From module . . . . . . . . : QDBOPEN
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
Message . . . . : Open of member OPPF002 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF002 file OPPF002 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF002 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF002 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 8
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPF4028 Diagnostic 10 03/22/16 07:30:15.009500 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
From module . . . . . . . . : QDBOPEN
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
Message . . . . : Open of member OPPF001 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF001 file OPPF001 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF001 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF001 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 9
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPC1221 Completion 00 03/22/16 07:30:15.102233 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561658/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC2191 Completion 00 03/22/16 07:30:15.128857 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 3700
Message . . . . : Object OPPF50 in QTEMP type *FILE deleted.
CPF9897 Diagnostic 40 03/22/16 07:30:15.129027 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > DELE Order1018C608130.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.144049 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 250 DELE command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.144127 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > SIZE Order1051C341891.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.155804 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 213 5134
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 10
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.161544 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE I
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.178552 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to I.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.178769 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,214,238
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.194094 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.194172 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > RETR Order1051C341891.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.205287 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 11
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:15.218454 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 226 Transfer complete.
Cause . . . . . : No additional online help information is available.
CPCA081 Completion 00 03/22/16 07:30:15.242031 QP0LCCMN QSYS *STMT OPCL226 PROGRAMS *STMT
From module . . . . . . . . : QP0LCCMN
From procedure . . . . . . : Qp0lCmnSnd__FPcT1iN21T3
Statement . . . . . . . . . : 10
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 1500
Message . . . . : Stream file copied to object.
Cause . . . . . : Stream file /CARS/Inbound/Orders/Order1051C341891.pdi was
successfully copied to object
/QSYS.LIB/FILE0256.LIB/OPPF008.FILE/OPPF008.MBR in CCSID (Coded Character
Set Identifier) 37.
CPC3101 Completion 00 03/22/16 07:30:15.249109 QDBCLRPF QSYS 0263 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2000
Message . . . . : Member OPPF009 file OPPF009 in FILE0256 cleared.
CPF2105 Escape 40 03/22/16 07:30:15.262712 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2400
Message . . . . : Object OPPF50 in QTEMP type *FILE not found.
Cause . . . . . : No object was found for the name or type specified.
Recovery . . . : Specify the correct name or type of the object. Then try
the request again.
CPI2101 Information 00 03/22/16 07:30:15.297390 QLICRDUP QSYS 0989 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
Message . . . . : Object OPPF50 in QTEMP type *FILE created.
CPC2130 Completion 00 03/22/16 07:30:15.297562 QLICRDUP QSYS 02A4 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
Message . . . . : 1 objects duplicated.
Cause . . . . . : All the objects with supported object types specified on
the Create Duplicate Object (CRTDUPOBJ) command were duplicated. See low
level messages to determine if any objects were not duplicated.
CPF4028 Diagnostic 10 03/22/16 07:30:15.347799 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
From module . . . . . . . . : QDBOPEN
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 12
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
Message . . . . : Open of member OPPF002 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF002 file OPPF002 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF002 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF002 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPF4028 Diagnostic 10 03/22/16 07:30:15.348143 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
From module . . . . . . . . : QDBOPEN
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 13
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Message . . . . : Open of member OPPF001 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF001 file OPPF001 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF001 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF001 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPC1221 Completion 00 03/22/16 07:30:15.388148 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561659/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC1221 Completion 00 03/22/16 07:30:15.462308 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561660/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 14
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPC1221 Completion 00 03/22/16 07:30:15.521681 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561661/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC1221 Completion 00 03/22/16 07:30:17.197380 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561662/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC1221 Completion 00 03/22/16 07:30:17.284207 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561663/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC2191 Completion 00 03/22/16 07:30:17.302652 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 3700
Message . . . . : Object OPPF50 in QTEMP type *FILE deleted.
CPF9897 Diagnostic 40 03/22/16 07:30:17.302869 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > DELE Order1051C341891.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.315779 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 250 DELE command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.315822 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > SIZE Order1051C341898.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.333948 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 15
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 213 6515
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.358227 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE I
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.375619 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to I.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.375799 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,81,103
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.388989 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.389032 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > RETR Order1051C341898.pdi
Cause . . . . . : No additional online help information is available.
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 16
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPF9897 Diagnostic 40 03/22/16 07:30:17.403602 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:17.618691 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 226 Transfer complete.
Cause . . . . . : No additional online help information is available.
CPCA081 Completion 00 03/22/16 07:30:17.633324 QP0LCCMN QSYS *STMT OPCL226 PROGRAMS *STMT
From module . . . . . . . . : QP0LCCMN
From procedure . . . . . . : Qp0lCmnSnd__FPcT1iN21T3
Statement . . . . . . . . . : 10
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 1500
Message . . . . : Stream file copied to object.
Cause . . . . . : Stream file /CARS/Inbound/Orders/Order1051C341898.pdi was
successfully copied to object
/QSYS.LIB/FILE0256.LIB/OPPF008.FILE/OPPF008.MBR in CCSID (Coded Character
Set Identifier) 37.
CPC3101 Completion 00 03/22/16 07:30:17.640483 QDBCLRPF QSYS 0263 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2000
Message . . . . : Member OPPF009 file OPPF009 in FILE0256 cleared.
CPF2105 Escape 40 03/22/16 07:30:17.650352 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2400
Message . . . . : Object OPPF50 in QTEMP type *FILE not found.
Cause . . . . . : No object was found for the name or type specified.
Recovery . . . : Specify the correct name or type of the object. Then try
the request again.
CPI2101 Information 00 03/22/16 07:30:17.685301 QLICRDUP QSYS 0989 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
Message . . . . : Object OPPF50 in QTEMP type *FILE created.
CPC2130 Completion 00 03/22/16 07:30:17.685483 QLICRDUP QSYS 02A4 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 2500
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 17
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Message . . . . : 1 objects duplicated.
Cause . . . . . : All the objects with supported object types specified on
the Create Duplicate Object (CRTDUPOBJ) command were duplicated. See low
level messages to determine if any objects were not duplicated.
CPF4028 Diagnostic 10 03/22/16 07:30:17.734490 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
From module . . . . . . . . : QDBOPEN
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
Message . . . . : Open of member OPPF002 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF002 file OPPF002 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF002 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF002 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPF4028 Diagnostic 10 03/22/16 07:30:17.734802 QDBOPEN QSYS *STMT OPRP251 PROGRAMS *STMT
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 18
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From module . . . . . . . . : QDBOPEN
From procedure . . . . . . : SGNRTNOK
Statement . . . . . . . . . : 15408
To module . . . . . . . . . : OPRP251
To procedure . . . . . . . : OPRP251
Statement . . . . . . . . . : 2100000001
Message . . . . : Open of member OPPF001 was changed to SEQONLY(*NO).
Cause . . . . . : Member OPPF001 file OPPF001 in library FILE0256 was opened
with the SEQONLY(*YES) parameter specified in the program or on the Override
Database File (OVRDBF) command. However, the parameter has been changed to
SEQONLY(*NO) because of condition 1 shown below: 1 - The program opened
member OPPF001 for output operations only and SEQONLY(*YES) was specified
with the default number of records. SEQONLY(*YES) was changed to
SEQONLY(*NO) to allow the program to handle duplicate key, conversion
mapping, key mapping, and select or omit errors, or both select and omit
errors at the time of the output operation. 2 - The program opened the
member for other than input or output operations only. 3 - The program
opened a logical file member for output operations only and that member is
based on more than one physical file member. 4 - The record length plus the
feedback information for the member is greater than 32,767 bytes. 5 - The
commitment control level of *ALL is active and the member was opened for
input operations only, or the commitment control levels of either *ALL, *CS,
or *CHG were specified for a distributed file that was opened for input
operations only. 6 - The program opened member OPPF001 for output operations
only and SEQONLY(*YES) was specified with the default number of records and
duplicate key feedback or insert key feedback was requested. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow duplicate key feedback or insert key
feedback to be provided on a record by record basis. 7 - The program opened
a query member that contains at least one subselect. Either the outermost
subselect provided a correlated reference for a subquery or the outermost
subselect processed a subquery with an IN, = ANY, or <> ALL subquery
predicate operator, which is treated as a correlated reference. Only one
record can be retrieved at a time from this type of query. 8 - The file has
referential constraints, triggers, or is a distributed file. SEQONLY(*YES)
was changed to SEQONLY(*NO) to allow the trigger programs to be called or
the referential constraints to be enforced on a record by record basis, or
because SEQONLY(*YES) is not allowed for the distributed file open. 9 - The
file is a distributed file opened for DSTDTA(*CURRENT). One or more of the
nodes in this file have been implemented using join logical file processing.
10 - The file, or a physical file on which the file is based, contains File
Link Control DataLink fields. SEQONLY(*YES) was changed to SEQONLY(*NO) to
allow the DataLink fields in each record to be processed. Recovery . . . :
For condition 1 or condition 6: -- If changing parameter SEQONLY(*YES) to
SEQONLY(*NO) is not acceptable, use the Override Database File (OVRDBF)
command to override the parameter SEQONLY(*NO) by specifying SEQONLY(*YES N)
where N indicates the number of records. Then try your request again.
CPC1221 Completion 00 03/22/16 07:30:18.846698 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561664/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 19
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPC1221 Completion 00 03/22/16 07:30:18.882463 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561665/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC1221 Completion 00 03/22/16 07:30:18.924030 QWTCCSBJ QSYS 01C4 OPCL201 PROGRAMS *STMT
To module . . . . . . . . . : OPCL201
To procedure . . . . . . . : OPCL201
Statement . . . . . . . . . : 1300
Message . . . . : Job 561666/CISOPR/PROCESSORD submitted to job queue
PDIJQ02 in library SYSMODS.
CPC2191 Completion 00 03/22/16 07:30:18.964537 QLIDLOBJ QSYS 0686 OPCL226 PROGRAMS *STMT
To module . . . . . . . . . : OPCL226
To procedure . . . . . . . : OPCL226
Statement . . . . . . . . . : 3700
Message . . . . : Object OPPF50 in QTEMP type *FILE deleted.
CPF9897 Diagnostic 40 03/22/16 07:30:18.964710 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > DELE Order1051C341898.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.975315 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 250 DELE command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.975375 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > SIZE Order1219C337306.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.986295 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 213 10248
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 20
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.988177 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > TYPE I
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.997963 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 Type set to I.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:18.998111 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > PORT 172,16,1,1,79,158
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:19.008896 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : 200 PORT command successful.
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:19.008958 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
Message . . . . : > RETR Order1219C337306.pdi
Cause . . . . . : No additional online help information is available.
CPF9897 Diagnostic 40 03/22/16 07:30:19.026707 FTPAPIR4 SYSMODS *STMT FTPAPIR4 SYSMODS *STMT
From module . . . . . . . . : FTPAPIR4
From procedure . . . . . . : DIAGMSG
Statement . . . . . . . . . : 6955
To module . . . . . . . . . : FTPAPIR4
To procedure . . . . . . . : DIAGMSG
5770SS1 V7R2M0 140418 Display Job Log PDI001 03/22/16 08:50:08 CDT Page 21
Job name . . . . . . . . . . : FTPHYVEPDI User . . . . . . : CISOPR Number . . . . . . . . . . . : 561651
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Statement . . . . . . . . . : 6955
Message . . . . : 125 Data connection already open; Transfer starting.
Cause . . . . . : No additional online help information is available.
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------