[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: updating libhttp from 1.24 to 1.29?
I like where you're going with this, Scott. It's entirely possible that SysAdmin did not modify his job libl and picked up the "LIBHTTP" pieces when he ran INSTALL?
I'll check with him tomorrow.
Thanks.
Michael Koester
> -----Original Message-----
> From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-
> bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott Klement
> Sent: Wednesday, January 13, 2016 5:41 PM
> To: HTTPAPI and FTPAPI Projects
> Subject: Re: updating libhttp from 1.24 to 1.29?
>
> Michael,
>
> After loading HTTPAPI, you need to run the install program that comes with
> it. You can do this by putting the library at the top of your libl and
> then CALL INSTALL
>
> On one of the screens in the installer, it asks "Would you like to build
> HTTPAPI with SSL support?" You must answer this question with Y.
>
> Compiling HTTPAPI with this set to N is the only way you will get the
> "Only the http protocol is available" message (aside from modifying the
> source of HTTPAPI). If you start getting a similar message saying
> "Only the http and https protocols are available" that is a different
> story.
>
> -SK
>
>
> On 1/13/2016 4:02 PM, Koester, Michael wrote:
> > Thanks for the assist, Mr. Krebs.
> > But I still getting the error, "Only the http protocol is available!"
> >
> > Since I am not positive that we don't have any customization in LIBHTTP,
> I had SysAdmin bring in the v1.29 in, specifying the SSL support (but not
> a new ExPat). Had him set target lib to "LIBHTTP2", leaving LIBHTTP
> intact. All the new objects were created in LIBHTTP2 as well.
> > To test:
> > I set LIBHTTP2 ahead of LIBHTTP in my library list.
> > I re-created my service program with BNDDIR(LIBHTTP2/HTTPAPI).
> > I recompiled my test program.
> > I called my test program and stepped through with the SEP debugger.
> > The call to http_url_post_xml returned rc = -1.
> > The call to http_error() returned "Only the http protocol is
> available!".
> >
> > The call to http_url_post_xml looks like this:
> > rc = http_url_post_xml(NeoNovaURL
> > : %addr(postData : *DATA)
> > : %len(postData)
> > : %paddr(StartOfElement)
> > : %paddr(EndOfElement)
> > : *NULL );
> >
> > NeoNovaURL is: 'https://xml.NeoNova.net/NNSAPI.fcgi'
> >
> > PostData is: '<?xml version="1.0"?>
> > <authenticate><user>xxxxxx</user><pass>xxxxxxx</pass><domain>mygsc.com
> > </domain></authenticate>
> > <get_userinfo><user><userid>bob</userid></user></get_userinfo>'
> >
> > [I inserted line breaks here, and login credentials are masked with
> > xxxxxx]
> >
> > In our test environment, I can hit the http://sandbox-
> api.neonova.net/NNSAPI.fcgi site from the same program with no problem,
> and get expected results.
> >
> > I can use the HttpRequester browser plugin, send the same parameters to
> the production (https/...) site, and get expected results.
> >
> >
> > So where do I look to diagnose the cause?
> >
> > I'll be here for another hour today, then back at 7:30 AM EST tomorrow.
> >
> > Michael Koester
> >
> >> -----Original Message-----
> >> From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-
> >> bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Mike Krebs
> >> Sent: Friday, January 08, 2016 5:28 PM
> >> To: HTTPAPI and FTPAPI Projects
> >> Subject: RE: updating libhttp from 1.24 to 1.29?
> >>
> >> As far as SSL, that is the message if compiled without TLS (SSL)
> support.
> >>
> >> If you have custom programs in LIBHTTP, you should move the source to
> >> another library.
> >>
> >> Then follow the install instructions and put it right on top of what
> >> you already have.
> >> If your custom source is gone, copy back and recompile.
> >> All should be good.
> >>
> >> 1.24 to 1.29 is highly compatible. Mostly fixes in the upgrades.
> >>
> >> Your existing programs in other libraries will pick up the service
> >> programs in LIBHTTP and should run just fine. If not, a quick
> >> recompile should fix. You can test by installing in a different library
> if you want.
> >>
> >> -----Original Message-----
> >> From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-
> >> bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Koester, Michael
> >> Sent: Friday, January 8, 2016 3:04 PM
> >> To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> >> Subject: updating libhttp from 1.24 to 1.29?
> >>
> >> A few years back I installed v1.24, and it has been very useful in a
> >> number of applications. Now I'm trying to get another application up
> >> and running, but I suspect I need the SSL capability that may not
> >> have been selected in that install. I'm getting an error, "Only the
> >> http protocol is available!", which suggests I need to reinstall with
> >> the SSL capability selected?
> >> Is there a way to confirm that the SSL was not installed? Or does
> >> that error message happen only for that reason?
> >>
> >> My applications use the objects straight out of LIBHTTP, and we run
> >> iOS 7.1.
> >> Is it likely that I can re-install with v1.29 and the SSL option,
> >> without hurting the current applications?
> >> What are the steps to follow in that kind of update?
> >>
> >> Thanks,
> >> Michael Koester
> >> Programmer/Analyst
> >> DataEast - Granite State Communications
> >> ---------------------------------------------------------------------
> >> -- This is the FTPAPI mailing list. To unsubscribe, please go to:
> >> http://www.scottklement.com/mailman/listinfo/ftpapi
> >> ---------------------------------------------------------------------
> >> --
> >> ---------------------------------------------------------------------
> >> -- This is the FTPAPI mailing list. To unsubscribe, please go to:
> >> http://www.scottklement.com/mailman/listinfo/ftpapi
> >> ---------------------------------------------------------------------
> >> --
> > ----------------------------------------------------------------------
> > - This is the FTPAPI mailing list. To unsubscribe, please go to:
> > http://www.scottklement.com/mailman/listinfo/ftpapi
> > ----------------------------------------------------------------------
> > -
> >
>
> -----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> http://www.scottklement.com/mailman/listinfo/ftpapi
> -----------------------------------------------------------------------
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------