[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ftpapi Digest, Vol 97, Issue 15 1. RE: TESTMIRIN getting FTP 550 Return Code (Mike Krebs)

From: "Jerry Birch" <jerry.birch@xxxxxxx>
To: <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Ftpapi Digest, Vol 97, Issue 15 1. RE: TESTMIRIN getting FTP 550 Return Code (Mike Krebs)
Date: Wed, 3 Dec 2014 23:19:31 -0500

When I tried it manually from the IBMi I did not receive the 550 error afterthe same CWD /0100-00430 command and then I was able to enter an NLSTcommand and see the files in the directory as shown in the screen printbelow:


                           File Transfer Protocol

Previous FTP subcommands and messages:

CWD 0100-00430

 250 CWD command successful.

CWD /0100-00430

 250 CWD command successful.

NLST

 227 Entering Passive Mode (10,0,1,1,7,51).
 125 Data connection already open; Transfer starting.
 01012007.AJL
 05102014.AJL
 19102014.AJL
 23102014.AJL
 23112014.AJL
 226 Transfer complete.
Enter an FTP subcommand.
===>

What does not receiving the 550 error in manual entry point to?

Thanks,
Jerry


--------------------------------------------------
From: <ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Tuesday, November 25, 2014 11:40 AM
To: <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Ftpapi Digest, Vol 97, Issue 15

Send Ftpapi mailing list submissions to
ftpapi@xxxxxxxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
http://scottklement.com/mailman/listinfo/ftpapi
or, via email, send a message with subject or body 'help' to
ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx

You can reach the person managing the list at
ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ftpapi digest..."


Today's Topics:

  1. RE: TESTMIRIN getting FTP 550 Return Code (Mike Krebs)


----------------------------------------------------------------------

Message: 1
Date: Tue, 25 Nov 2014 10:40:01 -0600
From: Mike Krebs <mkrebs@xxxxxxxxxxxxxxxxxx>
To: HTTPAPI and FTPAPI Projects <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: RE: TESTMIRIN getting FTP 550 Return Code
Message-ID: <3DF08BA25872B644A1421B9F085B1829A0E5F392F3@xxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

Did you try doing it manually from your IBMi? Do you get the same error?

-----Original Message-----

From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Jerry Birch

Sent: Monday, November 24, 2014 7:30 PM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: TESTMIRIN getting FTP 550 Return Code

Below is the job log from a run of the TESTMIRIN program using our FTP
Server. The "/0100-00430" directory is an actual directory on the FTP
Server. Could a 550 return code be due to authority issues?

0: > TYPE A
0: 200 Type set to A.
0: > PORT 10,30,1,7,221,254
0: 200 PORT command successful.
0: > NLST
0: 150 Opening ASCII mode data connection for file list.
0: 226 Transfer complete.
0: > CWD 0100-00430
0: 250 CWD command successful.
0: > CWD  /0100-00430
0: 550  /0100-00430: The system cannot find the path specified.
0: > QUIT
0: 221

Because when I log in to the FTP Server from a DOS prompt with the sameuserprofile and run a CD to that directory it says the command is successfulas

seen below.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\>ftp x.x.x.x
Connected to x.x.x.x.
220 Microsoft FTP Service
User (x.x.x.x:(none)): aaaaa@dddddddd
331 Password required for aaaaa@dddddddd
Password:
230 User aaaaa@dddddddd logged in.
ftp> cd /0100-00430
250 CWD command successful.
ftp> pwd
257 "/0100-00430" is current directory.
ftp>

Thanks for any guidance,
Jerry


--------------------------------------------------
From: <ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, November 07, 2014 12:40 PM
To: <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Ftpapi Digest, Vol 97, Issue 7

Send Ftpapi mailing list submissions to
ftpapi@xxxxxxxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
http://scottklement.com/mailman/listinfo/ftpapi
or, via email, send a message with subject or body 'help' to
ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx

You can reach the person managing the list at
ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ftpapi digest..."


Today's Topics:

  1. Re: Ftpapi Digest, Vol 97, Issue 6 (raJerry Birch)


----------------------------------------------------------------------

Message: 1
Date: Fri, 7 Nov 2014 09:37:50 -0800
From: raJerry Birch <jerry.birch@xxxxxxx>
To: "ftpapi@xxxxxxxxxxxxxxxxxxxxxx" <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Ftpapi Digest, Vol 97, Issue 6
Message-ID:
<1415381870.62076.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

Yes I was using F10 to step through. In all the times I had used STRDBG,
F10 had always allowed me to see where problems occured. I did not know
F22 existed and had never taken the time to explore all the cmd keys'
functions. Thanks for teaching me something new!

Thanks Mike for expanding on the answer by showing the time savingmethod.


I will try it out this evening since this is a project I am working on
after hours.

Also, I'm sorry for taking up mailing list space for trivial answers butIhad just never encountered that type debugging situation and could notsee

why the files were not getting transferred. This should let me see what's
going on.

Thanks to all,
Jerry


________________________________
From: "ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx"
<ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Sent: Friday, November 7, 2014 11:45 AM
Subject: Ftpapi Digest, Vol 97, Issue 6


Send Ftpapi mailing list submissions to
   ftpapi@xxxxxxxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
   http://scottklement.com/mailman/listinfo/ftpapi
or, via email, send a message with subject or body 'help' to
   ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx

You can reach the person managing the list at
   ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ftpapi digest..."


Today's Topics:

 1. RE: Message 5 - Debugging TESTMIRIN (Mike Krebs)


----------------------------------------------------------------------

Message: 1
Date: Fri, 7 Nov 2014 10:45:21 -0600
From: Mike Krebs <mkrebs@xxxxxxxxxxxxxxxxxx>
To: HTTPAPI and FTPAPI Projects <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Subject: RE: Message 5 - Debugging TESTMIRIN
Message-ID: <3DF08BA25872B644A1421B9F085B1829A0E5D9D192@xxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

STRDBG mainpgm
F10 (step)
Call mainpgm
When it breaks on the first statement, press F14
Add the service program to the work with Module List
Opt    Program/module    Library        Type
1      ftpapir4          *LIBL          *SRVPGM

Use 5 on the module that has do_dir
Add a breakpoint.
F12 to continue

Will save a little time wading through the program using F22.


-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Michael Ryan
Sent: Friday, November 7, 2014 10:17 AM
To: HTTPAPI and FTPAPI Projects
Subject: Re: Message 5 - Debugging TESTMIRIN

Are you Shift-F10 (step into) instead of F10 (step over)?

Sent from my iPhone

On Nov 7, 2014, at 7:42 AM, raJerry Birch <jerry.birch@xxxxxxx> wrote:

 Jerry,
 FTPAPI is just a service program that you call from your own RPG
 programs.  Likewise, TESTMIRIN, is just a regular RPG program compiled
 with the normal RPG compiler from IBM.
 You can debug it the same way you'd debug anything else.
 Is that what you're asking?
 Scott,

 Thanks for your reply. I am still having to use SEU so I am using
 STRDBG. I set the DEBUG up for TESTMIRIN and was stepping through it
 but when it went to each of the CALLP statements, it did not step
 through the subprocedures and I need to see what is happening inside of
 the "do_dir" subprocedure. Do I need to do something else in the
 STRDBG setup or the compile for it to be able to step through the
 subprocedures?

 Thanks,
 Jerry
 From: "ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx"
 <ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
 To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 Sent: Friday, November 7, 2014 10:09 AM
 Subject: Ftpapi Digest, Vol 97, Issue 3
 Send Ftpapi mailing list submissions to
     [1]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 To subscribe or unsubscribe via the World Wide Web, visit
     [2]http://scottklement.com/mailman/listinfo/ftpapi
 or, via email, send a message with subject or body 'help' to
     [3]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
 You can reach the person managing the list at
     [4]ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
 When replying, please edit your Subject line so it is more specific
 than "Re: Contents of Ftpapi digest..."
 Today's Topics:
   1. Re: Longer Character Parameter (Scott Klement)
   2. RE: receive Dynamic XML (Mike Krebs)
   3. Re: receive Dynamic XML (Donnie Barrow)
   4. Debugging TESTMIRIN (raJerry Birch)
   5. Re: Debugging TESTMIRIN (Scott Klement)
   6. Re: receive Dynamic XML (Donnie Barrow)
 ----------------------------------------------------------------------
 Message: 1
 Date: Thu, 06 Nov 2014 13:18:00 -0600
 From: Scott Klement <[5]sk@xxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[6]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: Re: Longer Character Parameter
 Message-ID: <[7]545BC968.7010509@xxxxxxxxxxxxxxxx>
 Content-Type: text/plain; charset=UTF-8; format=flowed
 Arturo,
 A VARYING field (like your xml_Data example) consists of two parts, (1)
 a length (2) the actual data. However, the WEBFORM_postData() rotuine
 does not return it in that format. Instead, it just points directly to
 the data. It does return a length, but it's in a completely separate
 field.
 So you are confusing RPG by pointing a VARYING field at it. It's trying
 to use part of the data string as the length portion, and that's
 definitely going to cause problems.
 If you really need to read this data yourself (instead of just passing
 it on to another HTTPAPI routine) then please use a fixed-length
 variable (rather than VARYING) and restrict it's length using %SUBST.
 -SK

 On 11/6/2014 8:11 AM, Arturo wrote:
 Thanks guys! Much appreciate your response.


 Your suggestion worked! I'm fairly new to the pointer world, as I
 haven?t really had to use.  I will create my own procedure and not
 modify HTTPAPI. Again, great suggestion!


 Having another pointer issue. I want to get the value from the

 pointer

 postPtr from the following call: WEBFORM_postData(form :postPtr
 :postDataSize ) but get error RNX0115 when I do the following:


 p_PostData = postPtr;

 wXML = 'Value of uri: ' + xml_Data;


 The definitions are:

       D p_PostData      S              *

       D xml_Data          S              A  Len(500000) Varying

       D
 Based(p_PostData)


 What am I doing wrong, that I am getting the RNX0115 error? When I
 debug, and hit F11 on xml_Data, I see actual data in the field,

 which

 is why this error is confusing me.

 ------------------------------
 Message: 2
 Date: Thu, 6 Nov 2014 13:28:57 -0600
 From: Mike Krebs <[8]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[9]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: RE: receive Dynamic XML
 Message-ID:
 <[10]3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx>
 Content-Type: text/plain; charset="utf-8"
 Sounds like you are on the right track.
 If you have problems writing INCOMING, share some XML and there are a
 bunch of us that can help out. But with multiple data elements, you
 will have to use some global variables or data structures to keep track
 of the results.
 -----Original Message-----
 From: [11]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[12]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Thursday, November 6, 2014 11:57 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: Re: receive Dynamic XML
 Thank you for you response?Here is what I am doing. I getting item
 info/availability from a webservice. since it will involve multiple
 warehouses the xml will return lists aka arrays of warehouse item
 availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and used
 it since it was parsing the return data. In my case it will be a huge
 chunk of data to parse especially with the arrays....SO I didn't want
 to write it to the IFS [like in EXAMPLE17] but rather parse send the
 data back into the program parms.
       From: Mike Krebs <[13]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[14]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Sent: Thursday, November 6, 2014 12:15 PM
 Subject: RE: receive Dynamic XML

 I think http_url_post_xml allows you to work with the returned data
 directly. EXAMPLE16 is showing this by calling INCOMING for each
 element in the returned xml.
 -----Original Message-----
 From: [15]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[16]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott
 Mildenberger
 Sent: Thursday, November 6, 2014 10:29 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: RE: receive Dynamic XML
 I have used both the _raw and _xml procedures for either
 http_url_get/post depending on what you are using, they allow you to
 specify a procedure that gets called when data is received.? They are
 used in some of the provided examples if you search for them.
 Scott
 -----Original Message-----
 From: [17]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[18]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Wednesday, November 05, 2014 4:59 PM
 To: HTTPAPI and FTPAPI Projects
 Subject: receive Dynamic XML
 ?i need some guidanceMy rpgle free program is calling a webservice. I
 used Scott Klement's example17?but I do not want to write the response
 soap to the IFS. Is there anyway to receiveand parse?the response xml
 in the program without writing to the IFS Donovan BarrowDBarrow
 Consulting
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [19]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [20]http://www.scottklement.com/mailman/listinfo/ftpapi

----------------------------------------------------------------------
-

 ------------------------------
 Message: 3
 Date: Thu, 6 Nov 2014 19:41:23 +0000 (UTC)
 From: Donnie Barrow <[21]ddbarrow@xxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[22]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: Re: receive Dynamic XML
 Message-ID:

 <[23]1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxxxx.ne1.
 yahoo.com>

 Content-Type: text/plain; charset="utf-8"
 I am using?data structures. the?challenge for me will be to keep track
 of the array elements in the list as I can receive multiple warehouses.
 Gonna watch the program run?in debug to see how it plays out and then
 yell for help afterwards LOL.....so stay tuned!? thanks for your help.
 ?      From: Mike Krebs <[24]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[25]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Sent: Thursday, November 6, 2014 2:28 PM
 Subject: RE: receive Dynamic XML

 Sounds like you are on the right track.
 If you have problems writing INCOMING, share some XML and there are a
 bunch of us that can help out. But with multiple data elements, you
 will have to use some global variables or data structures to keep track
 of the results.
 -----Original Message-----
 From: [26]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[27]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Thursday, November 6, 2014 11:57 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: Re: receive Dynamic XML
 Thank you for you response?Here is what I am doing. I getting item
 info/availability from a webservice. since it will involve multiple
 warehouses the xml will return lists aka arrays of warehouse item
 availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and used
 it since it was parsing the return data. In my case it will be a huge
 chunk of data to parse especially with the arrays....SO I didn't want
 to write it to the IFS [like in EXAMPLE17] but rather parse send the
 data back into the program parms.
 ? ? ? From: Mike Krebs <[28]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[29]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Sent: Thursday, November 6, 2014 12:15 PM
 Subject: RE: receive Dynamic XML
 ?
 I think http_url_post_xml allows you to work with the returned data
 directly. EXAMPLE16 is showing this by calling INCOMING for each
 element in the returned xml.
 -----Original Message-----
 From: [30]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[31]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott
 Mildenberger
 Sent: Thursday, November 6, 2014 10:29 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: RE: receive Dynamic XML
 I have used both the _raw and _xml procedures for either
 http_url_get/post depending on what you are using, they allow you to
 specify a procedure that gets called when data is received.? They are
 used in some of the provided examples if you search for them.
 Scott
 -----Original Message-----
 From: [32]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[33]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Wednesday, November 05, 2014 4:59 PM
 To: HTTPAPI and FTPAPI Projects
 Subject: receive Dynamic XML
 ?i need some guidanceMy rpgle free program is calling a webservice. I
 used Scott Klement's example17?but I do not want to write the response
 soap to the IFS. Is there anyway to receiveand parse?the response xml
 in the program without writing to the IFS Donovan BarrowDBarrow
 Consulting
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [34]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [35]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 ?
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [36]http://www.scottklement.com/mailman/listinfo/ftpapi

----------------------------------------------------------------------
-

 -------------- next part --------------
   I am using data structures. the challenge for me will be to keep
 track
   of the array elements in the list as I can receive multiple
 warehouses.
   Gonna watch the program run in debug to see how it plays out and then
   yell for help afterwards LOL.....so stay tuned!  thanks for your
 help.
     __________________________________________________________________
   From: Mike Krebs <[37]mkrebs@xxxxxxxxxxxxxxxxxx>
   To: HTTPAPI and FTPAPI Projects <[38]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
   Sent: Thursday, November 6, 2014 2:28 PM
   Subject: RE: receive Dynamic XML
   Sounds like you are on the right track.
   If you have problems writing INCOMING, share some XML and there are a
   bunch of us that can help out. But with multiple data elements, you
   will have to use some global variables or data structures to keep
 track
   of the results.
   -----Original Message-----
   From: [1][39]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[2][40]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Donnie
   Barrow
   Sent: Thursday, November 6, 2014 11:57 AM
   To: HTTPAPI and FTPAPI Projects
   Subject: Re: receive Dynamic XML
   Thank you for you response Here is what I am doing. I getting item
   info/availability from a webservice. since it will involve multiple
   warehouses the xml will return lists aka arrays of warehouse item
   availability.[UGHHH]  So I took a bit of EXAMPLE16 & EXAMPLE17 and
 used
   it since it was parsing the return data. In my case it will be a huge
   chunk of data to parse especially with the arrays....SO I didn't want
   to write it to the IFS [like in EXAMPLE17] but rather parse send the
   data back into the program parms.
         From: Mike Krebs <[3][41]mkrebs@xxxxxxxxxxxxxxxxxx>
   To: HTTPAPI and FTPAPI Projects
 <[4][42]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
   Sent: Thursday, November 6, 2014 12:15 PM
   Subject: RE: receive Dynamic XML
   I think http_url_post_xml allows you to work with the returned data
   directly. EXAMPLE16 is showing this by calling INCOMING for each
   element in the returned xml.
   -----Original Message-----
   From: [5][43]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[6][44]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Scott
   Mildenberger
   Sent: Thursday, November 6, 2014 10:29 AM
   To: HTTPAPI and FTPAPI Projects
   Subject: RE: receive Dynamic XML
   I have used both the _raw and _xml procedures for either
   http_url_get/post depending on what you are using, they allow you to
   specify a procedure that gets called when data is received.  They are
   used in some of the provided examples if you search for them.
   Scott
   -----Original Message-----
   From: [7][45]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[8][46]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Donnie
   Barrow
   Sent: Wednesday, November 05, 2014 4:59 PM
   To: HTTPAPI and FTPAPI Projects
   Subject: receive Dynamic XML
     i need some guidanceMy rpgle free program is calling a webservice.
 I
   used Scott Klement's example17 but I do not want to write the
 response
   soap to the IFS. Is there anyway to receiveand parse the response xml
   in the program without writing to the IFS Donovan BarrowDBarrow
   Consulting

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [9][47]http://www.scottklement.com/mailman/listinfo/ftpapi


----------------------------------------------------------------------
-

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [10][48]http://www.scottklement.com/mailman/listinfo/ftpapi


----------------------------------------------------------------------
-

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [11][49]http://www.scottklement.com/mailman/listinfo/ftpapi

 -----------------------------------------------------------------------
 References
   1. mailto:[50]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   2. mailto:[51]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   3. mailto:[52]mkrebs@xxxxxxxxxxxxxxxxxx
   4. mailto:[53]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   5. mailto:[54]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   6. mailto:[55]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   7. mailto:[56]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   8. mailto:[57]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   9. [58]http://www.scottklement.com/mailman/listinfo/ftpapi
   10. [59]http://www.scottklement.com/mailman/listinfo/ftpapi
   11. [60]http://www.scottklement.com/mailman/listinfo/ftpapi
 ------------------------------
 Message: 4
 Date: Thu, 6 Nov 2014 11:42:35 -0800
 From: raJerry Birch <[61]jerry.birch@xxxxxxx>
 To: "[62]ftpapi@xxxxxxxxxxxxxxxxxxxxxx"
 <[63]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: Debugging TESTMIRIN
 Message-ID:
     <[64]1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
 Content-Type: text/plain; charset="us-ascii"
 I am new to FTPAPI and I'm trying to use the TESTMIRIN program to get
 all the files from an FTP server directory to a specific IFS directory
 on an i system. Is there a way to step through the recursive call of
 the do_dir subprocedure with debug to see what is happening or can you
 only examine FTP return codes to try to see what is happening?
 Best Regards,
 Jerry L. Birch
 -------------- next part --------------
   I am new to FTPAPI and I'm trying to use the TESTMIRIN program to get
   all the files from an FTP server directory to a specific IFS
 directory
   on an i system. Is there a way to step through the recursive call of
   the do_dir subprocedure with debug to see what is happening or can
 you
   only examine FTP return codes to try to see what is happening?
   Best Regards,
   Jerry L. Birch
 ------------------------------
 Message: 5
 Date: Thu, 06 Nov 2014 14:54:14 -0600
 From: Scott Klement <[65]sk@xxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[66]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: Re: Debugging TESTMIRIN
 Message-ID: <[67]545BDFF6.1060207@xxxxxxxxxxxxxxxx>
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 Jerry,
 FTPAPI is just a service program that you call from your own RPG
 programs.  Likewise, TESTMIRIN, is just a regular RPG program compiled
 with the normal RPG compiler from IBM.
 You can debug it the same way you'd debug anything else.
 Is that what you're asking?

 On 11/6/2014 1:42 PM, raJerry Birch wrote:
 I am new to FTPAPI and I'm trying to use the TESTMIRIN program to

get

 all the files from an FTP server directory to a specific IFS

 directory

 on an i system. Is there a way to step through the recursive call

of

 the do_dir subprocedure with debug to see what is happening or can

you

 only examine FTP return codes to try to see what is happening?
 Best Regards,
 Jerry L. Birch

 ------------------------------
 Message: 6
 Date: Fri, 7 Nov 2014 15:06:19 +0000 (UTC)
 From: Donnie Barrow <[68]ddbarrow@xxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[69]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Subject: Re: receive Dynamic XML
 Message-ID:

 <[70]2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxxxx.ne1.
 yahoo.com>

 Content-Type: text/plain; charset="utf-8"
 with that example there is only one variable being passed back.rc =
 http_url_post_xml(
 '[71]http://www.webservicex.net/CurrencyConvertor.asmx':%addr(SOAP) +
 2 : %len(SOAP) : *NULL : %paddr(Incoming) : %addr(rate)?please give me
 a suggestion on?how to handle a data structure where I am using an
 external file definition. Would?I incorporate the routine in ex17?
 ?      From: Mike Krebs <[72]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[73]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Sent: Thursday, November 6, 2014 2:28 PM
 Subject: RE: receive Dynamic XML

 Sounds like you are on the right track.
 If you have problems writing INCOMING, share some XML and there are a
 bunch of us that can help out. But with multiple data elements, you
 will have to use some global variables or data structures to keep track
 of the results.
 -----Original Message-----
 From: [74]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[75]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Thursday, November 6, 2014 11:57 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: Re: receive Dynamic XML
 Thank you for you response?Here is what I am doing. I getting item
 info/availability from a webservice. since it will involve multiple
 warehouses the xml will return lists aka arrays of warehouse item
 availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and used
 it since it was parsing the return data. In my case it will be a huge
 chunk of data to parse especially with the arrays....SO I didn't want
 to write it to the IFS [like in EXAMPLE17] but rather parse send the
 data back into the program parms.
 ? ? ? From: Mike Krebs <[76]mkrebs@xxxxxxxxxxxxxxxxxx>
 To: HTTPAPI and FTPAPI Projects <[77]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
 Sent: Thursday, November 6, 2014 12:15 PM
 Subject: RE: receive Dynamic XML
 ?
 I think http_url_post_xml allows you to work with the returned data
 directly. EXAMPLE16 is showing this by calling INCOMING for each
 element in the returned xml.
 -----Original Message-----
 From: [78]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[79]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott
 Mildenberger
 Sent: Thursday, November 6, 2014 10:29 AM
 To: HTTPAPI and FTPAPI Projects
 Subject: RE: receive Dynamic XML
 I have used both the _raw and _xml procedures for either
 http_url_get/post depending on what you are using, they allow you to
 specify a procedure that gets called when data is received.? They are
 used in some of the provided examples if you search for them.
 Scott
 -----Original Message-----
 From: [80]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 [mailto:[81]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Donnie
 Barrow
 Sent: Wednesday, November 05, 2014 4:59 PM
 To: HTTPAPI and FTPAPI Projects
 Subject: receive Dynamic XML
 ?i need some guidanceMy rpgle free program is calling a webservice. I
 used Scott Klement's example17?but I do not want to write the response
 soap to the IFS. Is there anyway to receiveand parse?the response xml
 in the program without writing to the IFS Donovan BarrowDBarrow
 Consulting
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [82]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [83]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 ?
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list.? To unsubscribe, please go to:
 [84]http://www.scottklement.com/mailman/listinfo/ftpapi

----------------------------------------------------------------------
-

 -------------- next part --------------
   with that example there is only one variable being passed back.
   rc = http_url_post_xml(
   '[85]http://www.webservicex.net/CurrencyConvertor.asmx'
   : %addr(SOAP) + 2
   : %len(SOAP)
   : *NULL
   : %paddr(Incoming)
   : %addr(rate)
   please give me a suggestion on how to handle a data structure where I
   am using an external file definition. Would I incorporate the routine
   in ex17?
     __________________________________________________________________
   From: Mike Krebs <[86]mkrebs@xxxxxxxxxxxxxxxxxx>
   To: HTTPAPI and FTPAPI Projects <[87]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
   Sent: Thursday, November 6, 2014 2:28 PM
   Subject: RE: receive Dynamic XML
   Sounds like you are on the right track.
   If you have problems writing INCOMING, share some XML and there are a
   bunch of us that can help out. But with multiple data elements, you
   will have to use some global variables or data structures to keep
 track
   of the results.
   -----Original Message-----
   From: [1][88]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[2][89]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Donnie
   Barrow
   Sent: Thursday, November 6, 2014 11:57 AM
   To: HTTPAPI and FTPAPI Projects
   Subject: Re: receive Dynamic XML
   Thank you for you response Here is what I am doing. I getting item
   info/availability from a webservice. since it will involve multiple
   warehouses the xml will return lists aka arrays of warehouse item
   availability.[UGHHH]  So I took a bit of EXAMPLE16 & EXAMPLE17 and
 used
   it since it was parsing the return data. In my case it will be a huge
   chunk of data to parse especially with the arrays....SO I didn't want
   to write it to the IFS [like in EXAMPLE17] but rather parse send the
   data back into the program parms.
         From: Mike Krebs <[3][90]mkrebs@xxxxxxxxxxxxxxxxxx>
   To: HTTPAPI and FTPAPI Projects
 <[4][91]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
   Sent: Thursday, November 6, 2014 12:15 PM
   Subject: RE: receive Dynamic XML
   I think http_url_post_xml allows you to work with the returned data
   directly. EXAMPLE16 is showing this by calling INCOMING for each
   element in the returned xml.
   -----Original Message-----
   From: [5][92]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[6][93]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Scott
   Mildenberger
   Sent: Thursday, November 6, 2014 10:29 AM
   To: HTTPAPI and FTPAPI Projects
   Subject: RE: receive Dynamic XML
   I have used both the _raw and _xml procedures for either
   http_url_get/post depending on what you are using, they allow you to
   specify a procedure that gets called when data is received.  They are
   used in some of the provided examples if you search for them.
   Scott
   -----Original Message-----
   From: [7][94]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   [mailto:[8][95]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
 Donnie
   Barrow
   Sent: Wednesday, November 05, 2014 4:59 PM
   To: HTTPAPI and FTPAPI Projects
   Subject: receive Dynamic XML
     i need some guidanceMy rpgle free program is calling a webservice.
 I
   used Scott Klement's example17 but I do not want to write the
 response
   soap to the IFS. Is there anyway to receiveand parse the response xml
   in the program without writing to the IFS Donovan BarrowDBarrow
   Consulting

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [9][96]http://www.scottklement.com/mailman/listinfo/ftpapi


----------------------------------------------------------------------
-

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [10][97]http://www.scottklement.com/mailman/listinfo/ftpapi


----------------------------------------------------------------------
-

 -----------------------------------------------------------------------
   This is the FTPAPI mailing list.  To unsubscribe, please go to:
   [11][98]http://www.scottklement.com/mailman/listinfo/ftpapi

 -----------------------------------------------------------------------
 References
   1. mailto:[99]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   2. mailto:[100]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   3. mailto:[101]mkrebs@xxxxxxxxxxxxxxxxxx
   4. mailto:[102]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
   5. mailto:[103]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   6. mailto:[104]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   7. mailto:[105]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   8. mailto:[106]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
   9. [107]http://www.scottklement.com/mailman/listinfo/ftpapi
   10. [108]http://www.scottklement.com/mailman/listinfo/ftpapi
   11. [109]http://www.scottklement.com/mailman/listinfo/ftpapi
 ------------------------------
 -----------------------------------------------------------------------
 This is the FTPAPI mailing list digest.  To unsubscribe, go to:
 [110]http://www.scottklement.com/mailman/listinfo/ftpapi
 -----------------------------------------------------------------------
 End of Ftpapi Digest, Vol 97, Issue 3
 *************************************

References

 1. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 2. http://scottklement.com/mailman/listinfo/ftpapi
 3. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
 4. mailto:ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
 5. mailto:sk@xxxxxxxxxxxxxxxx
 6. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 7. mailto:545BC968.7010509@xxxxxxxxxxxxxxxx
 8. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 9. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 10. mailto:3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx
 11. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 12. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 13. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 14. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 15. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 16. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 17. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 18. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 19. http://www.scottklement.com/mailman/listinfo/ftpapi
 20. http://www.scottklement.com/mailman/listinfo/ftpapi
 21. mailto:ddbarrow@xxxxxxxxx
 22. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 23.
mailto:1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxxxx.n
e1.yahoo.com
 24. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 25. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 26. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 27. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 28. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 29. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 30. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 31. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 32. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 33. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 34. http://www.scottklement.com/mailman/listinfo/ftpapi
 35. http://www.scottklement.com/mailman/listinfo/ftpapi
 36. http://www.scottklement.com/mailman/listinfo/ftpapi
 37. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 38. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 39. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 40. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 41. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 42. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 43. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 44. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 45. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 46. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 47. http://www.scottklement.com/mailman/listinfo/ftpapi
 48. http://www.scottklement.com/mailman/listinfo/ftpapi
 49. http://www.scottklement.com/mailman/listinfo/ftpapi
 50. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 51. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 52. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 53. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 54. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 55. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 56. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 57. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 58. http://www.scottklement.com/mailman/listinfo/ftpapi
 59. http://www.scottklement.com/mailman/listinfo/ftpapi
 60. http://www.scottklement.com/mailman/listinfo/ftpapi
 61. mailto:jerry.birch@xxxxxxx
 62. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 63. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 64. mailto:1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
 65. mailto:sk@xxxxxxxxxxxxxxxx
 66. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 67. mailto:545BDFF6.1060207@xxxxxxxxxxxxxxxx
 68. mailto:ddbarrow@xxxxxxxxx
 69. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 70.
mailto:2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxxxx.n
e1.yahoo.com  71. http://www.webservicex.net/CurrencyConvertor.asmx'
 72. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 73. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 74. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 75. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 76. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 77. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 78. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 79. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 80. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 81. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 82. http://www.scottklement.com/mailman/listinfo/ftpapi
 83. http://www.scottklement.com/mailman/listinfo/ftpapi
 84. http://www.scottklement.com/mailman/listinfo/ftpapi
 85. http://www.webservicex.net/CurrencyConvertor.asmx'
 86. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 87. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 88. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 89. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 90. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 91. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 92. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 93. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 94. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 95. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 96. http://www.scottklement.com/mailman/listinfo/ftpapi
 97. http://www.scottklement.com/mailman/listinfo/ftpapi
 98. http://www.scottklement.com/mailman/listinfo/ftpapi
 99. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
100. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
101. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
102. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
103. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
104. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
105. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
106. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
107. http://www.scottklement.com/mailman/listinfo/ftpapi
108. http://www.scottklement.com/mailman/listinfo/ftpapi
109. http://www.scottklement.com/mailman/listinfo/ftpapi
110. http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------------
- This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------------
-

-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


------------------------------

-----------------------------------------------------------------------
This is the FTPAPI mailing list digest.  To unsubscribe, go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


End of Ftpapi Digest, Vol 97, Issue 6
*************************************
-------------- next part --------------
  Yes I was using F10 to step through. In all the times I had used
  STRDBG, F10 had always allowed me to see where problems occured. I did
  not know F22 existed and had never taken the time to explore all the
  cmd keys' functions. Thanks for teaching me something new!

  Thanks Mike for expanding on the answer by showing the time saving
  method.

  I will try it out this evening since this is a project I am working on
  after hours.

  Also, I'm sorry for taking up mailing list space for trivial answers
  but I had just never encountered that type debugging situation and
  could not see why the files were not getting transferred. This should
  let me see what's going on.

  Thanks to all,
  Jerry
  From: "ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx"
  <ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
  To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  Sent: Friday, November 7, 2014 11:45 AM
  Subject: Ftpapi Digest, Vol 97, Issue 6
  Send Ftpapi mailing list submissions to
      [1]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  To subscribe or unsubscribe via the World Wide Web, visit
      [2]http://scottklement.com/mailman/listinfo/ftpapi
  or, via email, send a message with subject or body 'help' to
      [3]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
  You can reach the person managing the list at
      [4]ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
  When replying, please edit your Subject line so it is more specific
  than "Re: Contents of Ftpapi digest..."
  Today's Topics:
    1. RE: Message 5 - Debugging TESTMIRIN (Mike Krebs)
  ----------------------------------------------------------------------
  Message: 1
  Date: Fri, 7 Nov 2014 10:45:21 -0600
  From: Mike Krebs <[5]mkrebs@xxxxxxxxxxxxxxxxxx>
  To: HTTPAPI and FTPAPI Projects <[6]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  Subject: RE: Message 5 - Debugging TESTMIRIN
  Message-ID:
  <[7]3DF08BA25872B644A1421B9F085B1829A0E5D9D192@xxxxxxxxxxxx>
  Content-Type: text/plain; charset="us-ascii"
  STRDBG mainpgm
  F10 (step)
  Call mainpgm
  When it breaks on the first statement, press F14
  Add the service program to the work with Module List
  Opt    Program/module    Library        Type
  1      ftpapir4          *LIBL          *SRVPGM
  Use 5 on the module that has do_dir
  Add a breakpoint.
  F12 to continue
  Will save a little time wading through the program using F22.
  -----Original Message-----
  From: [8]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  [mailto:[9]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Michael
  Ryan
  Sent: Friday, November 7, 2014 10:17 AM
  To: HTTPAPI and FTPAPI Projects
  Subject: Re: Message 5 - Debugging TESTMIRIN
  Are you Shift-F10 (step into) instead of F10 (step over)?
  Sent from my iPhone
  > On Nov 7, 2014, at 7:42 AM, raJerry Birch <[10]jerry.birch@xxxxxxx>
  wrote:
  >
  >  Jerry,
  >  FTPAPI is just a service program that you call from your own RPG
  >  programs.  Likewise, TESTMIRIN, is just a regular RPG program
  compiled
  >  with the normal RPG compiler from IBM.
  >  You can debug it the same way you'd debug anything else.
  >  Is that what you're asking?
  >  Scott,
  >
  >  Thanks for your reply. I am still having to use SEU so I am using
  >  STRDBG. I set the DEBUG up for TESTMIRIN and was stepping through it
  >  but when it went to each of the CALLP statements, it did not step
  >  through the subprocedures and I need to see what is happening inside
  of
  >  the "do_dir" subprocedure. Do I need to do something else in the
  >  STRDBG setup or the compile for it to be able to step through the
  >  subprocedures?
  >
  >  Thanks,
  >  Jerry
  >  From: "[11]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx"
  >  <[12]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx>
  >  To: [13]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  Sent: Friday, November 7, 2014 10:09 AM
  >  Subject: Ftpapi Digest, Vol 97, Issue 3
  >  Send Ftpapi mailing list submissions to
  >      [1][14]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  To subscribe or unsubscribe via the World Wide Web, visit
  >      [2][15]http://scottklement.com/mailman/listinfo/ftpapi
  >  or, via email, send a message with subject or body 'help' to
  >      [3][16]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
  >  You can reach the person managing the list at
  >      [4][17]ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
  >  When replying, please edit your Subject line so it is more specific
  >  than "Re: Contents of Ftpapi digest..."
  >  Today's Topics:
  >    1. Re: Longer Character Parameter (Scott Klement)
  >    2. RE: receive Dynamic XML (Mike Krebs)
  >    3. Re: receive Dynamic XML (Donnie Barrow)
  >    4. Debugging TESTMIRIN (raJerry Birch)
  >    5. Re: Debugging TESTMIRIN (Scott Klement)
  >    6. Re: receive Dynamic XML (Donnie Barrow)
  >
  ----------------------------------------------------------------------
  >  Message: 1
  >  Date: Thu, 06 Nov 2014 13:18:00 -0600
  >  From: Scott Klement <[5][18]sk@xxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[6][19]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: Re: Longer Character Parameter
  >  Message-ID: <[7][20]545BC968.7010509@xxxxxxxxxxxxxxxx>
  >  Content-Type: text/plain; charset=UTF-8; format=flowed
  >  Arturo,
  >  A VARYING field (like your xml_Data example) consists of two parts,
  (1)
  >  a length (2) the actual data. However, the WEBFORM_postData()
  rotuine
  >  does not return it in that format. Instead, it just points directly
  to
  >  the data. It does return a length, but it's in a completely separate
  >  field.
  >  So you are confusing RPG by pointing a VARYING field at it. It's
  trying
  >  to use part of the data string as the length portion, and that's
  >  definitely going to cause problems.
  >  If you really need to read this data yourself (instead of just
  passing
  >  it on to another HTTPAPI routine) then please use a fixed-length
  >  variable (rather than VARYING) and restrict it's length using
  %SUBST.
  >  -SK
  >>  On 11/6/2014 8:11 AM, Arturo wrote:
  >>  Thanks guys! Much appreciate your response.
  >>
  >>
  >>  Your suggestion worked! I'm fairly new to the pointer world, as I
  >>  haven?t really had to use.  I will create my own procedure and not
  >>  modify HTTPAPI. Again, great suggestion!
  >>
  >>
  >>  Having another pointer issue. I want to get the value from the
  >  pointer
  >>  postPtr from the following call: WEBFORM_postData(form :postPtr
  >>  :postDataSize ) but get error RNX0115 when I do the following:
  >>
  >>
  >>  p_PostData = postPtr;
  >>
  >>  wXML = 'Value of uri: ' + xml_Data;
  >>
  >>
  >>  The definitions are:
  >>
  >>        D p_PostData      S              *
  >>
  >>        D xml_Data          S              A  Len(500000) Varying
  >>
  >>        D
  >>  Based(p_PostData)
  >>
  >>
  >>  What am I doing wrong, that I am getting the RNX0115 error? When I
  >>  debug, and hit F11 on xml_Data, I see actual data in the field,
  >  which
  >>  is why this error is confusing me.
  >  ------------------------------
  >  Message: 2
  >  Date: Thu, 6 Nov 2014 13:28:57 -0600
  >  From: Mike Krebs <[8][21]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[9][22]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: RE: receive Dynamic XML
  >  Message-ID:
  >  <[10][23]3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx>
  >  Content-Type: text/plain; charset="utf-8"
  >  Sounds like you are on the right track.
  >  If you have problems writing INCOMING, share some XML and there are
  a
  >  bunch of us that can help out. But with multiple data elements, you
  >  will have to use some global variables or data structures to keep
  track
  >  of the results.
  >  -----Original Message-----
  >  From: [11][24]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[12][25]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Thursday, November 6, 2014 11:57 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: Re: receive Dynamic XML
  >  Thank you for you response?Here is what I am doing. I getting item
  >  info/availability from a webservice. since it will involve multiple
  >  warehouses the xml will return lists aka arrays of warehouse item
  >  availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and
  used
  >  it since it was parsing the return data. In my case it will be a
  huge
  >  chunk of data to parse especially with the arrays....SO I didn't
  want
  >  to write it to the IFS [like in EXAMPLE17] but rather parse send the
  >  data back into the program parms.
  >        From: Mike Krebs <[13][26]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[14][27]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Sent: Thursday, November 6, 2014 12:15 PM
  >  Subject: RE: receive Dynamic XML
  >
  >  I think http_url_post_xml allows you to work with the returned data
  >  directly. EXAMPLE16 is showing this by calling INCOMING for each
  >  element in the returned xml.
  >  -----Original Message-----
  >  From: [15][28]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[16][29]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Scott
  >  Mildenberger
  >  Sent: Thursday, November 6, 2014 10:29 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: RE: receive Dynamic XML
  >  I have used both the _raw and _xml procedures for either
  >  http_url_get/post depending on what you are using, they allow you to
  >  specify a procedure that gets called when data is received.? They
  are
  >  used in some of the provided examples if you search for them.
  >  Scott
  >  -----Original Message-----
  >  From: [17][30]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[18][31]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Wednesday, November 05, 2014 4:59 PM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: receive Dynamic XML
  >  ?i need some guidanceMy rpgle free program is calling a webservice.
  I
  >  used Scott Klement's example17?but I do not want to write the
  response
  >  soap to the IFS. Is there anyway to receiveand parse?the response
  xml
  >  in the program without writing to the IFS Donovan BarrowDBarrow
  >  Consulting
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [19][32]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [20][33]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >  ------------------------------
  >  Message: 3
  >  Date: Thu, 6 Nov 2014 19:41:23 +0000 (UTC)
  >  From: Donnie Barrow <[21][34]ddbarrow@xxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[22][35]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: Re: receive Dynamic XML
  >  Message-ID:
  >
  >
  <[23][36]1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxxxx.
  ne1.
  >  yahoo.com>
  >
  >  Content-Type: text/plain; charset="utf-8"
  >  I am using?data structures. the?challenge for me will be to keep
  track
  >  of the array elements in the list as I can receive multiple
  warehouses.
  >  Gonna watch the program run?in debug to see how it plays out and
  then
  >  yell for help afterwards LOL.....so stay tuned!? thanks for your
  help.
  >  ?      From: Mike Krebs <[24][37]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[25][38]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Sent: Thursday, November 6, 2014 2:28 PM
  >  Subject: RE: receive Dynamic XML
  >
  >  Sounds like you are on the right track.
  >  If you have problems writing INCOMING, share some XML and there are
  a
  >  bunch of us that can help out. But with multiple data elements, you
  >  will have to use some global variables or data structures to keep
  track
  >  of the results.
  >  -----Original Message-----
  >  From: [26][39]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[27][40]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Thursday, November 6, 2014 11:57 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: Re: receive Dynamic XML
  >  Thank you for you response?Here is what I am doing. I getting item
  >  info/availability from a webservice. since it will involve multiple
  >  warehouses the xml will return lists aka arrays of warehouse item
  >  availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and
  used
  >  it since it was parsing the return data. In my case it will be a
  huge
  >  chunk of data to parse especially with the arrays....SO I didn't
  want
  >  to write it to the IFS [like in EXAMPLE17] but rather parse send the
  >  data back into the program parms.
  >  ? ? ? From: Mike Krebs <[28][41]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[29][42]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Sent: Thursday, November 6, 2014 12:15 PM
  >  Subject: RE: receive Dynamic XML
  >  ?
  >  I think http_url_post_xml allows you to work with the returned data
  >  directly. EXAMPLE16 is showing this by calling INCOMING for each
  >  element in the returned xml.
  >  -----Original Message-----
  >  From: [30][43]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[31][44]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Scott
  >  Mildenberger
  >  Sent: Thursday, November 6, 2014 10:29 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: RE: receive Dynamic XML
  >  I have used both the _raw and _xml procedures for either
  >  http_url_get/post depending on what you are using, they allow you to
  >  specify a procedure that gets called when data is received.? They
  are
  >  used in some of the provided examples if you search for them.
  >  Scott
  >  -----Original Message-----
  >  From: [32][45]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[33][46]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Wednesday, November 05, 2014 4:59 PM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: receive Dynamic XML
  >  ?i need some guidanceMy rpgle free program is calling a webservice.
  I
  >  used Scott Klement's example17?but I do not want to write the
  response
  >  soap to the IFS. Is there anyway to receiveand parse?the response
  xml
  >  in the program without writing to the IFS Donovan BarrowDBarrow
  >  Consulting
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [34][47]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [35][48]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >  ?
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [36][49]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >  -------------- next part --------------
  >    I am using data structures. the challenge for me will be to keep
  >  track
  >    of the array elements in the list as I can receive multiple
  >  warehouses.
  >    Gonna watch the program run in debug to see how it plays out and
  then
  >    yell for help afterwards LOL.....so stay tuned!  thanks for your
  >  help.
  >
  __________________________________________________________________
  >    From: Mike Krebs <[37][50]mkrebs@xxxxxxxxxxxxxxxxxx>
  >    To: HTTPAPI and FTPAPI Projects
  <[38][51]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >    Sent: Thursday, November 6, 2014 2:28 PM
  >    Subject: RE: receive Dynamic XML
  >    Sounds like you are on the right track.
  >    If you have problems writing INCOMING, share some XML and there
  are a
  >    bunch of us that can help out. But with multiple data elements,
  you
  >    will have to use some global variables or data structures to keep
  >  track
  >    of the results.
  >    -----Original Message-----
  >    From: [1][39][52]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[2][40][53]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Donnie
  >    Barrow
  >    Sent: Thursday, November 6, 2014 11:57 AM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: Re: receive Dynamic XML
  >    Thank you for you response Here is what I am doing. I getting item
  >    info/availability from a webservice. since it will involve
  multiple
  >    warehouses the xml will return lists aka arrays of warehouse item
  >    availability.[UGHHH]  So I took a bit of EXAMPLE16 & EXAMPLE17 and
  >  used
  >    it since it was parsing the return data. In my case it will be a
  huge
  >    chunk of data to parse especially with the arrays....SO I didn't
  want
  >    to write it to the IFS [like in EXAMPLE17] but rather parse send
  the
  >    data back into the program parms.
  >          From: Mike Krebs <[3][41][54]mkrebs@xxxxxxxxxxxxxxxxxx>
  >    To: HTTPAPI and FTPAPI Projects
  >  <[4][42][55]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >    Sent: Thursday, November 6, 2014 12:15 PM
  >    Subject: RE: receive Dynamic XML
  >    I think http_url_post_xml allows you to work with the returned
  data
  >    directly. EXAMPLE16 is showing this by calling INCOMING for each
  >    element in the returned xml.
  >    -----Original Message-----
  >    From: [5][43][56]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[6][44][57]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Scott
  >    Mildenberger
  >    Sent: Thursday, November 6, 2014 10:29 AM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: RE: receive Dynamic XML
  >    I have used both the _raw and _xml procedures for either
  >    http_url_get/post depending on what you are using, they allow you
  to
  >    specify a procedure that gets called when data is received.  They
  are
  >    used in some of the provided examples if you search for them.
  >    Scott
  >    -----Original Message-----
  >    From: [7][45][58]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[8][46][59]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Donnie
  >    Barrow
  >    Sent: Wednesday, November 05, 2014 4:59 PM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: receive Dynamic XML
  >      i need some guidanceMy rpgle free program is calling a
  webservice.
  >  I
  >    used Scott Klement's example17 but I do not want to write the
  >  response
  >    soap to the IFS. Is there anyway to receiveand parse the response
  xml
  >    in the program without writing to the IFS Donovan BarrowDBarrow
  >    Consulting
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [9][47][60]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [10][48][61]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [11][49][62]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  -----------------------------------------------------------------------
  >  References
  >    1. mailto:[50][63]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    2. mailto:[51][64]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    3. mailto:[52][65]mkrebs@xxxxxxxxxxxxxxxxxx
  >    4. mailto:[53][66]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >    5. mailto:[54][67]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    6. mailto:[55][68]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    7. mailto:[56][69]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    8. mailto:[57][70]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    9. [58][71]http://www.scottklement.com/mailman/listinfo/ftpapi
  >    10. [59][72]http://www.scottklement.com/mailman/listinfo/ftpapi
  >    11. [60][73]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  ------------------------------
  >  Message: 4
  >  Date: Thu, 6 Nov 2014 11:42:35 -0800
  >  From: raJerry Birch <[61][74]jerry.birch@xxxxxxx>
  >  To: "[62][75]ftpapi@xxxxxxxxxxxxxxxxxxxxxx"
  >  <[63][76]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: Debugging TESTMIRIN
  >  Message-ID:
  >
  <[64][77]1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
  >  Content-Type: text/plain; charset="us-ascii"
  >  I am new to FTPAPI and I'm trying to use the TESTMIRIN program to
  get
  >  all the files from an FTP server directory to a specific IFS
  directory
  >  on an i system. Is there a way to step through the recursive call of
  >  the do_dir subprocedure with debug to see what is happening or can
  you
  >  only examine FTP return codes to try to see what is happening?
  >  Best Regards,
  >  Jerry L. Birch
  >  -------------- next part --------------
  >    I am new to FTPAPI and I'm trying to use the TESTMIRIN program to
  get
  >    all the files from an FTP server directory to a specific IFS
  >  directory
  >    on an i system. Is there a way to step through the recursive call
  of
  >    the do_dir subprocedure with debug to see what is happening or can
  >  you
  >    only examine FTP return codes to try to see what is happening?
  >    Best Regards,
  >    Jerry L. Birch
  >  ------------------------------
  >  Message: 5
  >  Date: Thu, 06 Nov 2014 14:54:14 -0600
  >  From: Scott Klement <[65][78]sk@xxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[66][79]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: Re: Debugging TESTMIRIN
  >  Message-ID: <[67][80]545BDFF6.1060207@xxxxxxxxxxxxxxxx>
  >  Content-Type: text/plain; charset=ISO-8859-1; format=flowed
  >  Jerry,
  >  FTPAPI is just a service program that you call from your own RPG
  >  programs.  Likewise, TESTMIRIN, is just a regular RPG program
  compiled
  >  with the normal RPG compiler from IBM.
  >  You can debug it the same way you'd debug anything else.
  >  Is that what you're asking?
  >>  On 11/6/2014 1:42 PM, raJerry Birch wrote:
  >>  I am new to FTPAPI and I'm trying to use the TESTMIRIN program to
  >  get
  >>  all the files from an FTP server directory to a specific IFS
  >  directory
  >>  on an i system. Is there a way to step through the recursive call
  >  of
  >>  the do_dir subprocedure with debug to see what is happening or can
  >  you
  >>  only examine FTP return codes to try to see what is happening?
  >>  Best Regards,
  >>  Jerry L. Birch
  >  ------------------------------
  >  Message: 6
  >  Date: Fri, 7 Nov 2014 15:06:19 +0000 (UTC)
  >  From: Donnie Barrow <[68][81]ddbarrow@xxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[69][82]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Subject: Re: receive Dynamic XML
  >  Message-ID:
  >
  >
  <[70][83]2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxxxx.
  ne1.
  >  yahoo.com>
  >
  >  Content-Type: text/plain; charset="utf-8"
  >  with that example there is only one variable being passed back.rc =
  >  http_url_post_xml(
  >
  '[71][84]http://www.webservicex.net/CurrencyConvertor.asmx':%addr(SOAP)
  +
  >  2 : %len(SOAP) : *NULL : %paddr(Incoming) : %addr(rate)?please give
  me
  >  a suggestion on?how to handle a data structure where I am using an
  >  external file definition. Would?I incorporate the routine in ex17?
  >  ?      From: Mike Krebs <[72][85]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[73][86]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Sent: Thursday, November 6, 2014 2:28 PM
  >  Subject: RE: receive Dynamic XML
  >
  >  Sounds like you are on the right track.
  >  If you have problems writing INCOMING, share some XML and there are
  a
  >  bunch of us that can help out. But with multiple data elements, you
  >  will have to use some global variables or data structures to keep
  track
  >  of the results.
  >  -----Original Message-----
  >  From: [74][87]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[75][88]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Thursday, November 6, 2014 11:57 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: Re: receive Dynamic XML
  >  Thank you for you response?Here is what I am doing. I getting item
  >  info/availability from a webservice. since it will involve multiple
  >  warehouses the xml will return lists aka arrays of warehouse item
  >  availability.[UGHHH] ?So I took?a bit of EXAMPLE16 &?EXAMPLE17 and
  used
  >  it since it was parsing the return data. In my case it will be a
  huge
  >  chunk of data to parse especially with the arrays....SO I didn't
  want
  >  to write it to the IFS [like in EXAMPLE17] but rather parse send the
  >  data back into the program parms.
  >  ? ? ? From: Mike Krebs <[76][89]mkrebs@xxxxxxxxxxxxxxxxxx>
  >  To: HTTPAPI and FTPAPI Projects
  <[77][90]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >  Sent: Thursday, November 6, 2014 12:15 PM
  >  Subject: RE: receive Dynamic XML
  >  ?
  >  I think http_url_post_xml allows you to work with the returned data
  >  directly. EXAMPLE16 is showing this by calling INCOMING for each
  >  element in the returned xml.
  >  -----Original Message-----
  >  From: [78][91]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[79][92]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Scott
  >  Mildenberger
  >  Sent: Thursday, November 6, 2014 10:29 AM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: RE: receive Dynamic XML
  >  I have used both the _raw and _xml procedures for either
  >  http_url_get/post depending on what you are using, they allow you to
  >  specify a procedure that gets called when data is received.? They
  are
  >  used in some of the provided examples if you search for them.
  >  Scott
  >  -----Original Message-----
  >  From: [80][93]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  [mailto:[81][94]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
  Donnie
  >  Barrow
  >  Sent: Wednesday, November 05, 2014 4:59 PM
  >  To: HTTPAPI and FTPAPI Projects
  >  Subject: receive Dynamic XML
  >  ?i need some guidanceMy rpgle free program is calling a webservice.
  I
  >  used Scott Klement's example17?but I do not want to write the
  response
  >  soap to the IFS. Is there anyway to receiveand parse?the response
  xml
  >  in the program without writing to the IFS Donovan BarrowDBarrow
  >  Consulting
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [82][95]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [83][96]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >  ?
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list.? To unsubscribe, please go to:
  >  [84][97]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >  -------------- next part --------------
  >    with that example there is only one variable being passed back.
  >    rc = http_url_post_xml(
  >    '[85][98]http://www.webservicex.net/CurrencyConvertor.asmx'
  >    : %addr(SOAP) + 2
  >    : %len(SOAP)
  >    : *NULL
  >    : %paddr(Incoming)
  >    : %addr(rate)
  >    please give me a suggestion on how to handle a data structure
  where I
  >    am using an external file definition. Would I incorporate the
  routine
  >    in ex17?
  >
  __________________________________________________________________
  >    From: Mike Krebs <[86][99]mkrebs@xxxxxxxxxxxxxxxxxx>
  >    To: HTTPAPI and FTPAPI Projects
  <[87][100]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >    Sent: Thursday, November 6, 2014 2:28 PM
  >    Subject: RE: receive Dynamic XML
  >    Sounds like you are on the right track.
  >    If you have problems writing INCOMING, share some XML and there
  are a
  >    bunch of us that can help out. But with multiple data elements,
  you
  >    will have to use some global variables or data structures to keep
  >  track
  >    of the results.
  >    -----Original Message-----
  >    From: [1][88][101]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[2][89][102]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Donnie
  >    Barrow
  >    Sent: Thursday, November 6, 2014 11:57 AM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: Re: receive Dynamic XML
  >    Thank you for you response Here is what I am doing. I getting item
  >    info/availability from a webservice. since it will involve
  multiple
  >    warehouses the xml will return lists aka arrays of warehouse item
  >    availability.[UGHHH]  So I took a bit of EXAMPLE16 & EXAMPLE17 and
  >  used
  >    it since it was parsing the return data. In my case it will be a
  huge
  >    chunk of data to parse especially with the arrays....SO I didn't
  want
  >    to write it to the IFS [like in EXAMPLE17] but rather parse send
  the
  >    data back into the program parms.
  >          From: Mike Krebs <[3][90][103]mkrebs@xxxxxxxxxxxxxxxxxx>
  >    To: HTTPAPI and FTPAPI Projects
  >  <[4][91][104]ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
  >    Sent: Thursday, November 6, 2014 12:15 PM
  >    Subject: RE: receive Dynamic XML
  >    I think http_url_post_xml allows you to work with the returned
  data
  >    directly. EXAMPLE16 is showing this by calling INCOMING for each
  >    element in the returned xml.
  >    -----Original Message-----
  >    From: [5][92][105]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[6][93][106]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Scott
  >    Mildenberger
  >    Sent: Thursday, November 6, 2014 10:29 AM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: RE: receive Dynamic XML
  >    I have used both the _raw and _xml procedures for either
  >    http_url_get/post depending on what you are using, they allow you
  to
  >    specify a procedure that gets called when data is received.  They
  are
  >    used in some of the provided examples if you search for them.
  >    Scott
  >    -----Original Message-----
  >    From: [7][94][107]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    [mailto:[8][95][108]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
  Behalf Of
  >  Donnie
  >    Barrow
  >    Sent: Wednesday, November 05, 2014 4:59 PM
  >    To: HTTPAPI and FTPAPI Projects
  >    Subject: receive Dynamic XML
  >      i need some guidanceMy rpgle free program is calling a
  webservice.
  >  I
  >    used Scott Klement's example17 but I do not want to write the
  >  response
  >    soap to the IFS. Is there anyway to receiveand parse the response
  xml
  >    in the program without writing to the IFS Donovan BarrowDBarrow
  >    Consulting
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [9][96][109]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [10][97][110]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  >
  ----------------------------------------------------------------------
  > -
  >
  >
  -----------------------------------------------------------------------
  >    This is the FTPAPI mailing list.  To unsubscribe, please go to:
  >    [11][98][111]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  >
  -----------------------------------------------------------------------
  >  References
  >    1. mailto:[99][112]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    2. mailto:[100][113]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    3. mailto:[101][114]mkrebs@xxxxxxxxxxxxxxxxxx
  >    4. mailto:[102][115]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >    5. mailto:[103][116]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    6. mailto:[104][117]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    7. mailto:[105][118]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    8. mailto:[106][119]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >    9. [107][120]http://www.scottklement.com/mailman/listinfo/ftpapi
  >    10. [108][121]http://www.scottklement.com/mailman/listinfo/ftpapi
  >    11. [109][122]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  ------------------------------
  >
  -----------------------------------------------------------------------
  >  This is the FTPAPI mailing list digest.  To unsubscribe, go to:
  >  [110][123]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  -----------------------------------------------------------------------
  >  End of Ftpapi Digest, Vol 97, Issue 3
  >  *************************************
  >
  > References
  >
  >  1. mailto:[124]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  2. [125]http://scottklement.com/mailman/listinfo/ftpapi
  >  3. mailto:[126]ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
  >  4. mailto:[127]ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
  >  5. mailto:[128]sk@xxxxxxxxxxxxxxxx
  >  6. mailto:[129]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  7. mailto:[130]545BC968.7010509@xxxxxxxxxxxxxxxx
  >  8. mailto:[131]mkrebs@xxxxxxxxxxxxxxxxxx
  >  9. mailto:[132]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  10.
  mailto:[133]3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx
  >  11. mailto:[134]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  12. mailto:[135]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  13. mailto:[136]mkrebs@xxxxxxxxxxxxxxxxxx
  >  14. mailto:[137]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  15. mailto:[138]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  16. mailto:[139]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  17. mailto:[140]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  18. mailto:[141]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  19. [142]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  20. [143]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  21. mailto:[144]ddbarrow@xxxxxxxxx
  >  22. mailto:[145]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  23.
  >
  mailto:[146]1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxx
  il.n
  > e1.yahoo.com
  >  24. mailto:[147]mkrebs@xxxxxxxxxxxxxxxxxx
  >  25. mailto:[148]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  26. mailto:[149]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  27. mailto:[150]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  28. mailto:[151]mkrebs@xxxxxxxxxxxxxxxxxx
  >  29. mailto:[152]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  30. mailto:[153]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  31. mailto:[154]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  32. mailto:[155]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  33. mailto:[156]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  34. [157]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  35. [158]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  36. [159]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  37. mailto:[160]mkrebs@xxxxxxxxxxxxxxxxxx
  >  38. mailto:[161]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  39. mailto:[162]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  40. mailto:[163]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  41. mailto:[164]mkrebs@xxxxxxxxxxxxxxxxxx
  >  42. mailto:[165]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  43. mailto:[166]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  44. mailto:[167]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  45. mailto:[168]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  46. mailto:[169]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  47. [170]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  48. [171]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  49. [172]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  50. mailto:[173]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  51. mailto:[174]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  52. mailto:[175]mkrebs@xxxxxxxxxxxxxxxxxx
  >  53. mailto:[176]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  54. mailto:[177]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  55. mailto:[178]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  56. mailto:[179]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  57. mailto:[180]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  58. [181]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  59. [182]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  60. [183]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  61. mailto:[184]jerry.birch@xxxxxxx
  >  62. mailto:[185]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  63. mailto:[186]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  64.
  mailto:[187]1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
  >  65. mailto:[188]sk@xxxxxxxxxxxxxxxx
  >  66. mailto:[189]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  67. mailto:[190]545BDFF6.1060207@xxxxxxxxxxxxxxxx
  >  68. mailto:[191]ddbarrow@xxxxxxxxx
  >  69. mailto:[192]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  70.
  >
  mailto:[193]2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxx
  il.n
  > e1.yahoo.com  71.
  [194]http://www.webservicex.net/CurrencyConvertor.asmx'
  >  72. mailto:[195]mkrebs@xxxxxxxxxxxxxxxxxx
  >  73. mailto:[196]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  74. mailto:[197]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  75. mailto:[198]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  76. mailto:[199]mkrebs@xxxxxxxxxxxxxxxxxx
  >  77. mailto:[200]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  78. mailto:[201]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  79. mailto:[202]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  80. mailto:[203]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  81. mailto:[204]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  82. [205]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  83. [206]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  84. [207]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  85. [208]http://www.webservicex.net/CurrencyConvertor.asmx'
  >  86. mailto:[209]mkrebs@xxxxxxxxxxxxxxxxxx
  >  87. mailto:[210]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  88. mailto:[211]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  89. mailto:[212]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  90. mailto:[213]mkrebs@xxxxxxxxxxxxxxxxxx
  >  91. mailto:[214]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  >  92. mailto:[215]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  93. mailto:[216]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  94. mailto:[217]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  95. mailto:[218]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  >  96. [219]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  97. [220]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  98. [221]http://www.scottklement.com/mailman/listinfo/ftpapi
  >  99. mailto:[222]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 100. mailto:[223]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 101. mailto:[224]mkrebs@xxxxxxxxxxxxxxxxxx
  > 102. mailto:[225]ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  > 103. mailto:[226]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 104. mailto:[227]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 105. mailto:[228]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 106. mailto:[229]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  > 107. [230]http://www.scottklement.com/mailman/listinfo/ftpapi
  > 108. [231]http://www.scottklement.com/mailman/listinfo/ftpapi
  > 109. [232]http://www.scottklement.com/mailman/listinfo/ftpapi
  > 110. [233]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  ----------------------------------------------------------------------
  > - This is the FTPAPI mailing list.  To unsubscribe, please go to:
  > [234]http://www.scottklement.com/mailman/listinfo/ftpapi
  >
  ----------------------------------------------------------------------
  > -
  -----------------------------------------------------------------------
  This is the FTPAPI mailing list.  To unsubscribe, please go to:
  [235]http://www.scottklement.com/mailman/listinfo/ftpapi
  -----------------------------------------------------------------------
  ------------------------------
  -----------------------------------------------------------------------
  This is the FTPAPI mailing list digest.  To unsubscribe, go to:
  [236]http://www.scottklement.com/mailman/listinfo/ftpapi
  -----------------------------------------------------------------------
  End of Ftpapi Digest, Vol 97, Issue 6
  *************************************

References

  1. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  2. http://scottklement.com/mailman/listinfo/ftpapi
  3. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
  4. mailto:ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
  5. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
  6. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
  7. mailto:3DF08BA25872B644A1421B9F085B1829A0E5D9D192@xxxxxxxxxxxx
  8. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
  9. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 10. mailto:jerry.birch@xxxxxxx
 11. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
 12. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
 13. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 14. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 15. http://scottklement.com/mailman/listinfo/ftpapi
 16. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
 17. mailto:ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
 18. mailto:sk@xxxxxxxxxxxxxxxx
 19. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 20. mailto:545BC968.7010509@xxxxxxxxxxxxxxxx
 21. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 22. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 23. mailto:3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx
 24. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 25. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 26. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 27. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 28. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 29. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 30. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 31. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 32. http://www.scottklement.com/mailman/listinfo/ftpapi
 33. http://www.scottklement.com/mailman/listinfo/ftpapi
 34. mailto:ddbarrow@xxxxxxxxx
 35. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 36.
mailto:1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxxxx.ne1.
 37. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 38. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 39. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 40. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 41. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 42. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 43. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 44. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 45. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 46. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 47. http://www.scottklement.com/mailman/listinfo/ftpapi
 48. http://www.scottklement.com/mailman/listinfo/ftpapi
 49. http://www.scottklement.com/mailman/listinfo/ftpapi
 50. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 51. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 52. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 53. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 54. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 55. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 56. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 57. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 58. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 59. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 60. http://www.scottklement.com/mailman/listinfo/ftpapi
 61. http://www.scottklement.com/mailman/listinfo/ftpapi
 62. http://www.scottklement.com/mailman/listinfo/ftpapi
 63. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 64. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 65. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 66. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 67. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 68. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 69. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 70. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 71. http://www.scottklement.com/mailman/listinfo/ftpapi
 72. http://www.scottklement.com/mailman/listinfo/ftpapi
 73. http://www.scottklement.com/mailman/listinfo/ftpapi
 74. mailto:jerry.birch@xxxxxxx
 75. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 76. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 77. mailto:1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
 78. mailto:sk@xxxxxxxxxxxxxxxx
 79. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 80. mailto:545BDFF6.1060207@xxxxxxxxxxxxxxxx
 81. mailto:ddbarrow@xxxxxxxxx
 82. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 83.
mailto:2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxxxx.ne1.
 84. http://www.webservicex.net/CurrencyConvertor.asmx':
 85. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 86. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 87. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 88. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 89. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
 90. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
 91. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 92. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 93. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 94. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
 95. http://www.scottklement.com/mailman/listinfo/ftpapi
 96. http://www.scottklement.com/mailman/listinfo/ftpapi
 97. http://www.scottklement.com/mailman/listinfo/ftpapi
 98. http://www.webservicex.net/CurrencyConvertor.asmx'
 99. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
100. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
101. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
102. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
103. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
104. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
105. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
106. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
107. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
108. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
109. http://www.scottklement.com/mailman/listinfo/ftpapi
110. http://www.scottklement.com/mailman/listinfo/ftpapi
111. http://www.scottklement.com/mailman/listinfo/ftpapi
112. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
113. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
114. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
115. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
116. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
117. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
118. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
119. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
120. http://www.scottklement.com/mailman/listinfo/ftpapi
121. http://www.scottklement.com/mailman/listinfo/ftpapi
122. http://www.scottklement.com/mailman/listinfo/ftpapi
123. http://www.scottklement.com/mailman/listinfo/ftpapi
124. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
125. http://scottklement.com/mailman/listinfo/ftpapi
126. mailto:ftpapi-request@xxxxxxxxxxxxxxxxxxxxxx
127. mailto:ftpapi-owner@xxxxxxxxxxxxxxxxxxxxxx
128. mailto:sk@xxxxxxxxxxxxxxxx
129. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
130. mailto:545BC968.7010509@xxxxxxxxxxxxxxxx
131. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
132. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
133. mailto:3DF08BA25872B644A1421B9F085B1829A0E5D9D035@xxxxxxxxxxxx
134. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
135. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
136. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
137. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
138. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
139. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
140. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
141. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
142. http://www.scottklement.com/mailman/listinfo/ftpapi
143. http://www.scottklement.com/mailman/listinfo/ftpapi
144. mailto:ddbarrow@xxxxxxxxx
145. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
146.
mailto:1243368863.178054.1415302883258.JavaMail.yahoo@xxxxxxxxxxxxxx.n
147. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
148. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
149. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
150. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
151. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
152. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
153. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
154. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
155. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
156. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
157. http://www.scottklement.com/mailman/listinfo/ftpapi
158. http://www.scottklement.com/mailman/listinfo/ftpapi
159. http://www.scottklement.com/mailman/listinfo/ftpapi
160. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
161. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
162. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
163. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
164. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
165. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
166. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
167. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
168. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
169. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
170. http://www.scottklement.com/mailman/listinfo/ftpapi
171. http://www.scottklement.com/mailman/listinfo/ftpapi
172. http://www.scottklement.com/mailman/listinfo/ftpapi
173. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
174. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
175. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
176. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
177. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
178. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
179. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
180. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
181. http://www.scottklement.com/mailman/listinfo/ftpapi
182. http://www.scottklement.com/mailman/listinfo/ftpapi
183. http://www.scottklement.com/mailman/listinfo/ftpapi
184. mailto:jerry.birch@xxxxxxx
185. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
186. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
187. mailto:1415302955.20532.YahooMailNeo@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
188. mailto:sk@xxxxxxxxxxxxxxxx
189. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
190. mailto:545BDFF6.1060207@xxxxxxxxxxxxxxxx
191. mailto:ddbarrow@xxxxxxxxx
192. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
193.
mailto:2112098020.294575.1415372779589.JavaMail.yahoo@xxxxxxxxxxxxxx.n
194. http://www.webservicex.net/CurrencyConvertor.asmx'
195. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
196. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
197. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
198. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
199. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
200. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
201. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
202. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
203. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
204. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
205. http://www.scottklement.com/mailman/listinfo/ftpapi
206. http://www.scottklement.com/mailman/listinfo/ftpapi
207. http://www.scottklement.com/mailman/listinfo/ftpapi
208. http://www.webservicex.net/CurrencyConvertor.asmx'
209. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
210. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
211. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
212. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
213. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
214. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
215. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
216. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
217. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
218. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
219. http://www.scottklement.com/mailman/listinfo/ftpapi
220. http://www.scottklement.com/mailman/listinfo/ftpapi
221. http://www.scottklement.com/mailman/listinfo/ftpapi
222. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
223. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
224. mailto:mkrebs@xxxxxxxxxxxxxxxxxx
225. mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
226. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
227. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
228. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
229. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
230. http://www.scottklement.com/mailman/listinfo/ftpapi
231. http://www.scottklement.com/mailman/listinfo/ftpapi
232. http://www.scottklement.com/mailman/listinfo/ftpapi
233. http://www.scottklement.com/mailman/listinfo/ftpapi
234. http://www.scottklement.com/mailman/listinfo/ftpapi
235. http://www.scottklement.com/mailman/listinfo/ftpapi
236. http://www.scottklement.com/mailman/listinfo/ftpapi

------------------------------

-----------------------------------------------------------------------
This is the FTPAPI mailing list digest.  To unsubscribe, go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


End of Ftpapi Digest, Vol 97, Issue 7
*************************************


-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


------------------------------

-----------------------------------------------------------------------
This is the FTPAPI mailing list digest.  To unsubscribe, go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------


End of Ftpapi Digest, Vol 97, Issue 15

**************************************


-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------

Follow-Ups:
- Re: Ftpapi Digest, Vol 97, Issue 15 1. RE: TESTMIRIN getting FTP 550 Return Code (Mike Krebs)
  - From: Loek Maartens

Prev by Date: Re: EXPAT Parse error at Line 1: not well-formed (invalid token)
Next by Date: Re: Web service help
Previous by thread: Re: HTTPAPI error in HTTPAPIR4, module COMMTCPR4 procedure COMMTCP_BLOCKWRITE at 4705
Next by thread: Re: Ftpapi Digest, Vol 97, Issue 15 1. RE: TESTMIRIN getting FTP 550 Return Code (Mike Krebs)
Index(es):
- Date
- Thread