Mario,
I am missing the debug log. The debug log that you sent to me cannot be
the right one, because it sends a "FCKDisponibilita" message to the
server and receives a "FCKInfoComResponse" message from the server. I
am completely puzzled, because I cannot understand how that is
possible. The "FCKInfoCom.wsdl" specifies the following messages:
Request: FCKInfoCom
Response: FCKInfoComResponse
And the "fckdisponibilita.wsdl" specifies the following messages:
Request: FCKDisponibilita
Response: FCKDisponibilitaResponse
The program that you sent to me produces this message:
request =
'<?xml version="1.0" encoding="UTF-8"?>' +
'<soapenv:Envelope' +
' xmlns:soapenv="[1]http://schemas.xmlsoap.org/soap/envelope/";' +
' xmlns:impl="[2]http://localhost:8080/infarmaclick//farmaclick/+
Farmaclick2005001FCKInfoCom"' +
' xmlns:soapenc="[3]http://schemas.xmlsoap.org/soap/encoding/";' +
' xmlns:tns1="urn:BeanService"' +
' xmlns:xsd="[4]http://www.w3.org/2001/XMLSchema";' +
' xmlns:xsi="[5]http://www.w3.org/2001/XMLSchema-instance";' +
'>' +
'<soapenv:Body>' +
'<impl:FCKInfoCom' +
' soapenv:encodingStyle="[6]http://schemas.xmlsoap.org/soap/e+
ncoding/"' +
'>' +
But your debug log shows a "FCKDisponibilita" request message:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope ...>
<soapenv:Body>
<impl:FCKDisponibilita ...>
<daib xsi:type="tns1:DettaglioArticoliInputBean">
Last but not least I successfully received the response message of your
debug file from a soapUI mock service. I used a test program generated
with WSDL2RPG v1.13 and your stub program. The only thing I had to
change was a namespace value, that the soapUI mock service did not
like.
Regards,
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 03.06.2013 20:42:23:
> Von: martoriello@xxxxxxxxxxxxxxx
> An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
> Datum: 03.06.2013 20:53
> Betreff: Re: Problem with WSDL2RPG
> Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
>
> Thomas
> sorry I did a mistake because I can get the same service i.e product
> availability with 2 different webservices FCKDisponibilita and
FCKInfocom
> and of course I send the wrong one. Here I attach all the things that
you
> asked. The stub is the same because it uses the two wsdl together
if I am
> not wrong again.
> best regards
> mario
> -----Messaggio originale-----
> From: thomas.raddatz@xxxxxx
> Sent: Friday, May 31, 2013 8:58 AM
> To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> Subject: Re: Problem with WSDL2RPG
>
>
> Mario,
>
> I am confused, because either you send a wrong request
(FCKDisponibilita)
> to the server or you sent the wrong WSDL file to me. The WSDL file
that I
> received from you requires a FCKInfoCom message like this:
>
> <soapenv:Envelope
xmlns:xsi="[7]http://www.w3.org/2001/XMLSchema-instance";
> xmlns:xsd="[8]http://www.w3.org/2001/XMLSchema"; xmlns:soapenv="
> [9]http://schemas.xmlsoap.org/soap/envelope/"; xmlns:api="
> [10]http://api.farmaclick.infarma.it"; xmlns:soapenc="
> [11]http://schemas.xmlsoap.org/soap/encoding/";>
> <soapenv:Header/>
> <soapenv:Body>
> <api:FCKInfoCom soapenv:encodingStyle="
> [12]http://schemas.xmlsoap.org/soap/encoding/";>
> <icib xsi:type="urn:InfoComInputBean"
> xmlns:urn="urn:BeanService">
> <IDSessione
xsi:type="soapenc:string">IDSessione</IDSessione>
> <codiceFornitore
> xsi:type="soapenc:string">codiceFornitore</codiceFornitore>
> <arrayArticoliInput
> xsi:type="far:ArrayOf_tns1_ArticoloInputBean"
> soapenc:arrayType="urn:ArticoloInputBean[]" xmlns:far="
>
[13]http://localhost:8080/infarmaclick//farmaclick/Farmaclick2005001FCK
InfoCom
> "/>
> <descrizioneArticoli
> xsi:type="xsd:boolean">true</descrizioneArticoli>
> <descrizioneMotivazioneMancanza
> xsi:type="xsd:boolean">true</descrizioneMotivazioneMancanza>
> <indicazioneDepositoAllestimento
> xsi:type="xsd:boolean">true</indicazioneDepositoAllestimento>
> <codiceTipoOrdine
> xsi:type="soapenc:string">codiceTipoOrdine</codiceTipoOrdine>
> <indicazioneDatiConsegna
> xsi:type="xsd:boolean">true</indicazioneDatiConsegna>
> </icib>
> </api:FCKInfoCom>
> </soapenv:Body>
> </soapenv:Envelope>
>
>
> And here is what you sent to the server:
>
> <soapenv:Envelope
xmlns:soapenv="[14]http://schemas.xmlsoap.org/soap/envelope/
> " xmlns:impl="
> [15]http://localhost:8080/infarmaclick//farmaclick/
> Farmaclick2005001FCKDisponibilita
> " xmlns:soapenc="[16]http://schemas.xmlsoap.org/soap/encoding/";
> xmlns:tns1="urn:BeanService"
xmlns:tns2="[17]http://bean.farmaclick.infarma.it
> " xmlns:xsd="[18]http://www.w3.org/2001/XMLSchema"; xmlns:xsi="
> [19]http://www.w3.org/2001/XMLSchema-instance";>
> <soapenv:Body>
> <impl:FCKDisponibilita soapenv:encodingStyle="
> [20]http://schemas.xmlsoap.org/soap/encoding/";>
> <daib xsi:type="tns1:DettaglioArticoliInputBean">
> <codiceFornitore>UNIFARM</codiceFornitore>
>
<IDSessione>d1a5b667-4fba-4ce1-bd22-5ce3fe81a5a9</IDSessione>
> <arrayArticoliInput xsi:type="soapenc:Array"
> soapenc:arrayType="tns1:ArticoloInputBean[1]">
> <arrayArticoliInput xsi:type="tns1:ArticoloInputBean">
>
> <accettazioneAllinemantoColloInVendita>0</
> accettazioneAllinemantoColloInVendita>
> <accettazioneConsegnaDifferita>0</accettazioneConsegnaDifferita>
> <accettazioneProdottoSostitutivo>0</accettazioneProdottoSostitutivo>
> <codiceProdotto>004763330</codiceProdotto>
> <noteRiga/>
> <prenotazione>false</prenotazione>
> <quantitaRichiesta>1</quantitaRichiesta>
> </arrayArticoliInput>
> </arrayArticoliInput>
> <descrizioneArticoli>true</descrizioneArticoli>
> <descrizioneMotivazioneMancanza>true</descrizioneMotivazioneMancanza>
>
<indicazioneDepositoAllestimento>true</indicazioneDepositoAllestimento>
> </daib>
> </impl:FCKDisponibilita>
> </soapenv:Body>
> </soapenv:Envelope>
>
>
> Is it possible that someone changed your configuration and that you
send
> the wrong message, now?
>
> Regards,
>
> Thomas.
>
>
> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 30.05.2013 19:52:55:
>
> > Von: martoriello@xxxxxxxxxxxxxxx
> > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
> > Datum: 30.05.2013 20:00
> > Betreff: Re: Problem with WSDL2RPG
> > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> >
> > Thomas
> > here is what you ask .
> > best regards
> > Mario
> >
> > -----Messaggio originale-----
> > From: thomas.raddatz@xxxxxxxxxxx
> > Sent: Thursday, May 30, 2013 4:55 PM
> > To: HTTPAPI and FTPAPI Projects
> > Subject: Re: Problem with WSDL2RPG
> >
> > That is really strange. Do you have the wsdl file at your hands?
Can you
>
> > send it
> > to me?
> >
> > You may also include your stub module as plain text. I do not need
to
> > compile it
> > but maybe want to have a look at it.
> >
> > Thomas.
> >
> >
> > > Mario Martoriello <martoriello@xxxxxxxxxxxxxxx> hat am 30. Mai
2013 um
>
> > > 09:57
> > > geschrieben:
> > >
> > >
> > > Thomas
> > > thank you for your answer.
> > > The stub module was generated with 11.3 WSDLRPG version, but I am
not
> sure
> > > of it because the procedure SOAPMessage_Envelope statement is
this:
> > > when (MultiRef_isData(attrs));
> > > and you wrote that change it with 1.12. Anyway the stub was
generated
> with
> > > 1.11.3 or 1.12 but the time is that.
> > > The strange thing is that until a couple days ago it works fine,
so
> what
> > > do
> > > you suggest ? Have I to install the new version and regenerate
the
> stub
> > > module or anything else?
> > > Best regards
> > > Mario
> > >
> > > -----Messaggio originale-----
> > > From: Thomas Raddatz
> > > Sent: Tuesday, May 28, 2013 9:09 PM
> > > To: HTTPAPI and FTPAPI Projects
> > > Subject: Re: Problem with WSDL2RPG
> > >
> > > Mario,
> > >
> > > What version of WSDL2RPG did you use to generate the stub? You
> mentioned
> > > that you use 1.13 but that does not necessarily mean that you
> generated
> > > the
> > > stub with 1.13.
> > >
> > > At the top of the stub module there should be a comment line like
this
>
> > > one:
> > >
> > > * Based on WS_STUB v1.13
> > >
> > > Please also check a statement in procedure
SOAPMessage_Envelope().
> Does it
> > > look like this:
> > >
> > > when (MultiRef_isData(attrs)); // = OK
> > >
> > > Or does it look like this:
> > >
> > > when (name = 'multiRef' and MultiRef_isData(attrs)); // = WRONG
> > >
> > > If it looks like the latter one, remove "name = 'multiRef'" to
make it
> > > equal to the first one and try to call the web service again. The
> > > statement
> > > was changed with v1.12.
> > >
> > > Regards,
> > >
> > > Thomas.
> > >
> > > Am 28.05.2013 19:43, schrieb Mario Martoriello:
> > > > Hi all
> > > > I am using for long time this tool with HTTPAPI. Everything was
ok.
> > > > Since a couple day I am receveing the following error:
> > > > WSDL2RPG: USR0036: Failed to retrieve multi-reference
information of
> > > > ID
> > > > 'id1'.
> > > > received from procedure: BASICS1R1_f_sndPgmMsg
> > > > and statement: 54400
> > > > WSDL2RPG (eXpat error): (-1009) Failed to retrieve
multi-reference
> > > > information of ID 'id1'.
> > > >
> > > > Attached there is the complete log file. I know that I am using
an
> > > > WSDL2RPG old version (1.13) but maybe someone can suggest me
the
> > > > reason
> > > > for this error. I have in plan to upgrade to the new version
but at
> > > > the
> > > > moment I have no time to do it.
> > > >
> > > > Any help would be greatly aprreciated .. Sorriso
> > > >
> > > > Best regards
> > > > Mario
> > > >
> > > >
> > > >
> > > >
>
-----------------------------------------------------------------------
> > > > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > > > [21]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > >
>
-----------------------------------------------------------------------
> > > >
> > >
>
-----------------------------------------------------------------------
> > > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > > [22]http://www.scottklement.com/mailman/listinfo/ftpapi
> > >
>
-----------------------------------------------------------------------
> > >
> > >
>
-----------------------------------------------------------------------
> > > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > > [23]http://www.scottklement.com/mailman/listinfo/ftpapi
> > >
>
-----------------------------------------------------------------------
> >
> >
> >
> >
> >
> >
-----------------------------------------------------------------------
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > [24]http://www.scottklement.com/mailman/listinfo/ftpapi
> >
-----------------------------------------------------------------------
> > [Anhang "xthomas" gelöscht von Thomas Raddatz/OBI/DE] [Anhang
> > "FCKInfoCom.wsdl" gelöscht von Thomas Raddatz/OBI/DE]
> >
-----------------------------------------------------------------------
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > [25]http://www.scottklement.com/mailman/listinfo/ftpapi
> >
-----------------------------------------------------------------------
>
>
> --
> IMPORTANT NOTICE:
> This email is confidential, may be legally privileged, and is for the
> intended recipient only. Access, disclosure, copying, distribution,
or
> reliance on any of it by anyone else is prohibited and may be a
criminal
> offence. Please delete if obtained in error and email confirmation to
the
> sender.
>
>
>
>
>
>
-----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> [26]http://www.scottklement.com/mailman/listinfo/ftpapi
>
-----------------------------------------------------------------------
> [Anhang "fckdisponibilita.wsdl" gelöscht von Thomas Raddatz/OBI/DE]
> [Anhang "xthomas" gelöscht von Thomas Raddatz/OBI/DE] [Anhang
> "FCKInfoCom.wsdl" gelöscht von Thomas Raddatz/OBI/DE]
>
-----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> [27]http://www.scottklement.com/mailman/listinfo/ftpapi
>
-----------------------------------------------------------------------
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a
criminal
offence. Please delete if obtained in error and email confirmation to
the sender.
References
1. http://schemas.xmlsoap.org/soap/envelope/
2. http://localhost:8080/infarmaclick//farmaclick/+
3. http://schemas.xmlsoap.org/soap/encoding/
4. http://www.w3.org/2001/XMLSchema
5. http://www.w3.org/2001/XMLSchema-instance
6. http://schemas.xmlsoap.org/soap/e+
7. http://www.w3.org/2001/XMLSchema-instance
8. http://www.w3.org/2001/XMLSchema
9. http://schemas.xmlsoap.org/soap/envelope/
10. http://api.farmaclick.infarma.it/
11. http://schemas.xmlsoap.org/soap/encoding/
12. http://schemas.xmlsoap.org/soap/encoding/
13. http://localhost:8080/infarmaclick//farmaclick/Farmaclick2005001FCKInfoCom
14. http://schemas.xmlsoap.org/soap/envelope/
15. http://localhost:8080/infarmaclick//farmaclick/
16. http://schemas.xmlsoap.org/soap/encoding/
17. http://bean.farmaclick.infarma.it/
18. http://www.w3.org/2001/XMLSchema
19. http://www.w3.org/2001/XMLSchema-instance
20. http://schemas.xmlsoap.org/soap/encoding/
21. http://www.scottklement.com/mailman/listinfo/ftpapi
22. http://www.scottklement.com/mailman/listinfo/ftpapi
23. http://www.scottklement.com/mailman/listinfo/ftpapi
24. http://www.scottklement.com/mailman/listinfo/ftpapi
25. http://www.scottklement.com/mailman/listinfo/ftpapi
26. http://www.scottklement.com/mailman/listinfo/ftpapi
27. http://www.scottklement.com/mailman/listinfo/ftpapi
Attachment:
FCKINFOT1.rpgle
Description: Binary data
Attachment:
FCKINFO1.rpgle
Description: Binary data
Attachment:
FCKINFOT.log
Description: Binary data
----------------------------------------------------------------------- This is the FTPAPI mailing list. To unsubscribe, please go to: http://www.scottklement.com/mailman/listinfo/ftpapi -----------------------------------------------------------------------