[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (GSKit) Peer not recognized or badly formatted message received.
Hello Anthony,
Make sure the IBM engineer understands that you are receiving the error
while the application is calling gsk_secure_soc_read() and that you're
receiving error number 410. (GSK_ERROR_BAD_MESSAGE)
I don't know what is causing this error. I haven't encountered it
myself. But, the message seems to be telling you that the OS/400 SSL
routines (GSKit) doesn't understand the format of the SSL message that
was sent to you.
Let us know what you find out
On 2/28/2010 3:46 PM, Anthony_Wilson@xxxxxxxxxxxxxxx wrote:
>
> Hello everyone,
>
> My company has been using HTTPAPI for about 2.5 years. Recently, one of
> our vendors with which we utilize HTTPAPI to perform SSL communication is
> changing to a VeriSign Class 3 Secure Server CA - G2 digital certificate.
> We believed what we needed to do was to install this cert in DCM. This has
> been completed, but whenever we test run our process, we get the "(GSKit)
> Peer not recognized or badly formatted message received" message.
>
> We have tried everything that our staff and the vendor can think of and
> have found no solution. As a test of eliminating different factors to find
> the culprit, the vendor temporarily disabled the SSL requirement on their
> test server& then when we ran our process, everything worked. They
> re-enabled the SSL and back to failure.
>
> In the httpapi debug listing we get during the run we see (1) the dump of
> the client-side cert (us), (2) the dump of the server-side cert (vendor)&
> then (3) the following:
>
> Protocol Used: TLS Version 1
> http_persist_post(): entered
> http_long_ParseURL(): entered
> do_post(): entered
> POST /vl/api1c.asp HTTP/1.1
> Host: cat.callit.com
> User-Agent: http-api/1.23
> Content-Type: application/x-www-form-urlencoded
> Expect: 100-continue
> Content-Length: 182
> recvresp(): entered
> (GSKit) Peer not recognized or badly formatted message received.
> ssl_error(410): (GSKit) Peer not recognized or badly formatted message
> received.
> SetError() #44: CommSSL_read: read:(GSKit) Peer not recognized or badly
> formatted message recei
> http_close(): entered
>
> We have contacted IBM and they are in the process of analyzing an SSL
> trace. However, I really could use any education& assistance on this that
> this group could provide. The SSL is pretty new to me, but I have tried to
> give myself a very basic understanding of the concepts and how to use DCM.
>
> Thanks in advance.
>
> Anthony Wilson
> Direct To Consumer Analyst
>
> -----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> http://www.scottklement.com/mailman/listinfo/ftpapi
> -----------------------------------------------------------------------
>
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------