Thomas
I still can not make it work, I think I did the fixes you told me, I
increased the size of the 64449th to impl_retriveDDTObjectresponse as
attached; xmlSAXParser_Parse by an error in the procedure as attached.
Regards,
Ermanno
B&R Informatica Sas
Tel. +39 075602254
Cel. +39 337 600839
info@xxxxxxxxxxxxxxxxx < mailto:info@xxxxxxxxxxxxxxxxx>
www.br-informatica.it < http://www.br-informatica.it>
"ATTENZIONE:le informazioni contenute in questo messaggio sono da
considerarsi confidenziali ed il loro utilizzo è riservato unicamente al
destinatario sopra indicato. Chi dovesse ricevere questo messaggio per
errore è tenuto ad informare il mittente ed a rimuoverlo definitivamente da
ogni supporto elettronico o cartaceo."
-----Messaggio originale-----
Da: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx]Per conto di
thomas.raddatz@xxxxxx
Inviato: martedì 8 dicembre 2009 13.26
A: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Oggetto: Antwort: R: R: R: R: Antwort: 7: Timeout occurred while trying
toconnecttoserver
Ermanno,
I absolutely did not want to blame you. I hope that you did not feel like
that and that your web service stub finally works.
Regards,
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 08.12.2009 11:32:02:
> Von:
>
> info@xxxxxxxxxxxxxxxxx
>
> An:
>
> ftpapi@xxxxxxxxxxxxxxxxxxxxxx
>
> Datum:
>
> 08.12.2009 11:40
>
> Betreff:
>
> R: R: R: R: Antwort: 7: Timeout occurred while trying to connecttoserver
>
> Gesendet von:
>
> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
>
> Thomas
> You are absolutely right, I am the hoi misunderstood your instructions,
> thanks again.
> Ermanno
>
> B&R Informatica Sas
> Tel. +39 075602254
> Cel. +39 337 600839
> info@xxxxxxxxxxxxxxxxx < mailto:info@xxxxxxxxxxxxxxxxx>
> www.br-informatica.it < http://www.br-informatica.it>
>
> "ATTENZIONE:le informazioni contenute in questo messaggio sono da
>
> considerarsi confidenziali ed il loro utilizzo è riservato unicamente al
>
> destinatario sopra indicato. Chi dovesse ricevere questo messaggio per
>
> errore è tenuto ad informare il mittente ed a rimuoverlo definitivamente
da
>
> ogni supporto elettronico o cartaceo."
>
>
>
>
>
> -----Messaggio originale-----
> Da: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx]Per conto di Thomas
> Raddatz
> Inviato: lunedì 7 dicembre 2009 18.19
> A: HTTPAPI and FTPAPI Projects
> Oggetto: Re: R: R: R: Antwort: 7: Timeout occurred while trying to
> connecttoserver
>
>
> Ermanno,
>
> Please add the attached USR0029 member to file QWSDL2RPG and then run
> A_INSTALL again.
>
> By the way there was no need for installing the beta if you actually
decided
> to fix
> Marshaller_toBase64Binary(). What I said was either fix WSDL2R98 _or_
> install the beta.
>
> Nevertheless, sorry for the missing USR0029 member.
>
> Thomas.
>
>
>
> B&R Informatica Sas schrieb:
> > Thomas
> > I corrected the procedure Marshaller_toBase64Binary as indicated,
> > I downloaded the beta and I've redone the installation
> >
> > In creating the module WSDL2R01 I get the error: USR0029 State
QWSDL2RPG
> > file not found, the installation terminates.
> >
> > What can I do?
> > Ermanno
> >
> > B&R Informatica Sas
> > Tel. +39 075602254
> > Cel. +39 337 600839
> > info@xxxxxxxxxxxxxxxxx < mailto:info@xxxxxxxxxxxxxxxxx>
> > www.br-informatica.it < http://www.br-informatica.it>
> >
> > "ATTENZIONE:le informazioni contenute in questo messaggio sono da
> >
> > considerarsi confidenziali ed il loro utilizzo è riservato unicamente
al
> >
> > destinatario sopra indicato. Chi dovesse ricevere questo messaggio per
> >
> > errore è tenuto ad informare il mittente ed a rimuoverlo
definitivamente
> da
> >
> > ogni supporto elettronico o cartaceo."
> >
> >
> >
> >
> >
> > -----Messaggio originale-----
> > Da: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> > [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx]Per conto di Thomas
> > Raddatz
> > Inviato: domenica 6 dicembre 2009 19.50
> > A: HTTPAPI and FTPAPI Projects
> > Oggetto: Re: R: R: Antwort: 7: Timeout occurred while trying to connect
> > toserver
> >
> >
> > Ermanno,
> >
> > Based on your input I was able to fix the bug in WSDL2RPG. The problem
you
> > encountered with your web
> > service actually was a problem of the Base64 UnMarshaller. By mistake I
> > defined a field as 2I0
> > (integer) instead of 2U0 (unsigned integer). Because of that mistake
the
> > maximum data size was reduced
> > to 32k instead of 64k.
> >
> > I did not change anything in 'ws_cab', because I actually did not use
it
> to
> > debug the problem. Since
> > the mistake was in service program WSDL2RPGRT, there is a good chance
that
> > you do not need to change
> > something in 'ws_cab'. I used your debug data to create my own test web
> > service and based on that web
> > service I debugged the problem. Guess what, it is a nice barcode that
you
> > will get.
> >
> > There are two options to fix the problem:
> >
> > 1) Change the following lines in WSDL2R98 and reinstall WSDL2RPG:
> >
> > Procedures: Marshaller_toBase64Binary
> > UnMarshaller_toBase64Binary
> >
> > Before: D outLength 1 2I 0
> > After: D outLength 1 2U 0
> >
> > 2) Download the latest beta from here:
> >
> > http://www.tools400.de/beta/wsdl2rpg_v1.10_20091206_1932.zip
> >
> > In case you do not know how to save the decoded file data to a stream
> file,
> > here is the code I used do
> > do that:
> >
> > /COPY QIFS,PIFS IFS IO-Procedures
> > ...
> >
> > // Now let's call the web service.
> > getBase64EncodedJpegFileResponse =
> > Base64File_getBase64EncodedJpegFile(
> > requestMessage:
> > errText);
> >
> > // If the Web service finished successfully ...
> > if (not Base64File_isError());
> > // ... write image data to IFS file.
> > path = '/home/raddatz/wsdl2rpg/' +
> > getBase64EncodedJpegFileResponse.fileName;
> > hFile = f_openIfsFile(path
> > : O_WRONLY + O_SHARE_RDONLY +
> > O_CREAT + O_EXCL
> > : *: *: *);
> > if (hFile = RC_ERROR);
> > sndMsg('Failed to open file: ' + path);
> > else;
> > bytes = f_writeIfsFile(hFile
> > : %addr
(getBase64EncodedJpegFileResponse...
> > .fileData) + 2
> > : %len
(getBase64EncodedJpegFileResponse...
> > .fileData));
> > f_closeIfsFile(hFile);
> > endif;
> > else;
> >
> > In order to use the IFS procedures you have to bind to service program
> IFS.
> >
> > Last but not least do not forget to increase the size of
> > 'retriveDDTObjectReturn':
> >
> > D impl_retriveDDTObjectResponse_t...
> > D DS based(pDummy)
> > D qualified
> > D retriveDDTObjectReturn...
> > D 128A varying
> >
> > For my test web service I set it to what is shown below:
> >
> > D tns_getBase64EncodedJpegFileResponse_t...
> > D DS based(pDummy)
> > D qualified
> > D fileData 64449A varying
> > D fileName 128A varying
> >
> >
> > Regards,
> >
> > Thomas.
> >
> > B&R Informatica Sas schrieb:
> >> Thomas
> >> I tried what you suggested me but I can not solve the problem, sends
you
> > the
> >> stub as required;
> >> I will be very grateful if you can fix the problem.
> >> Ermanno.
> >>
> >> B&R Informatica Sas
> >> Tel. +39 075602254
> >> Cel. +39 337 600839
> >> info@xxxxxxxxxxxxxxxxx < mailto:info@xxxxxxxxxxxxxxxxx>
> >> www.br-informatica.it < http://www.br-informatica.it>
> >>
> >> "ATTENZIONE:le informazioni contenute in questo messaggio sono da
> >>
> >> considerarsi confidenziali ed il loro utilizzo è riservato unicamente
al
> >>
> >> destinatario sopra indicato. Chi dovesse ricevere questo messaggio per
> >>
> >> errore è tenuto ad informare il mittente ed a rimuoverlo
definitivamente
> > da
> >> ogni supporto elettronico o cartaceo."
> >>
> >>
> >>
> >>
> >>
> >> -----Messaggio originale-----
> >> Da: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> >> [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx]Per conto di Thomas
> >> Raddatz
> >> Inviato: venerdì 4 dicembre 2009 18.37
> >> A: HTTPAPI and FTPAPI Projects
> >> Oggetto: Re: R: Antwort: 7: Timeout occurred while trying to connect
to
> >> server
> >>
> >>
> >> Ermanno,
> >>
> >> I agree that it seems as if the web service returns the binary image
data
> > as
> >> element data of element
> >> <retriveDDTObjectReturn>. Most like this is the reason why you receive
> the
> >> "receiver is too small"
> >> error message.
> >>
> >> Without the wsdl file all I can do is just guessing that your stub
module
> >> should have a procedure
> >> ending with "retriveDDTObjectReturnEnd". That should be the procedure
> > which
> >> receives the data of
> >> element <retriveDDTObjectReturn>. Feel free to start the debugger and
add
> > a
> >> breakpoint to that
> >> procedure. When "depth" is 2, "value" should contain the image data
and
> >> "name" should be set to
> >> "retriveDDTObjectReturn". If that is true, it is up to you to modify
the
> >> stub module to put the image
> >> data to a place of your choice.
> >>
> >> The problem is the 64k barrier of RPG. Of course I could use pointers
and
> >> dynamic memory allocation to
> >> manage larger response data but I am fairly sure that most of the RPG
> >> programmers would not be happy
> >> with that. The other option is to wait for V6R1 which allows fields up
to
> >> 16MB.
> >>
> >> Just because I am curious, what is the schema type of
> >> "retriveDDTObjectReturn"?
> >>
> >> Last but not least, if you cannot fix the problem on your own, feel
free
> > to
> >> send the generated stub
> >> module to me. At the moment I do have much time left for playing
around
> > but
> >> perhaps I can fix it
> >> quickly. Having said that: I did not promise you anything.
> >>
> >> Regards,
> >>
> >> Thomas
> >>
> >> B&R Informatica Sas schrieb:
> >>> Thomas, sorry for the delayed response, we'll send debugging where I
> > think
> >> I
> >>> understand that the web service called me back the string of the
image
> >> that
> >>> I think exceeds 64K.
> >>> If this is the reason how can we fix this?
> >>> Ermanno.
> >>>
> >>> B&R Informatica Sas
> >>> Tel. +39 075602254
> >>> Cel. +39 337 600839
> >>> info@xxxxxxxxxxxxxxxxx < mailto:info@xxxxxxxxxxxxxxxxx>
> >>> www.br-informatica.it < http://www.br-informatica.it>
> >>>
> >>> "ATTENZIONE:le informazioni contenute in questo messaggio sono da
> >>>
> >>> considerarsi confidenziali ed il loro utilizzo è riservato unicamente
al
> >>>
> >>> destinatario sopra indicato. Chi dovesse ricevere questo messaggio
per
> >>>
> >>> errore è tenuto ad informare il mittente ed a rimuoverlo
definitivamente
> >> da
> >>> ogni supporto elettronico o cartaceo."
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> -----Messaggio originale-----
> >>> Da: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> >>> [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx]Per conto di
> >>> thomas.raddatz@xxxxxx
> >>> Inviato: giovedì 3 dicembre 2009 11.16
> >>> A: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> >>> Oggetto: Antwort: 7: Timeout occurred while trying to connect to
server
> >>>
> >>>
> >>>
> >>> Ermanno,
> >>>
> >>> May you please turn the debug log on and pass the debug log along
with
> > the
> >>> wsdl file to me? Please ensure that the debug log does not contain
any
> >>> ctritical data such as user name and password.
> >>>
> >>> Please do not post the log and the wsdl file to the mailing list but
> send
> >>> it directly to my tools400.de e-mail address.
> >>>
> >>> Thomas.
> >>>
> >>> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 03.12.2009 08:59:34:
> >>>
> >>>> Von:
> >>>>
> >>>> info@xxxxxxxxxxxxxxxxx
> >>>>
> >>>> An:
> >>>>
> >>>> ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> >>>>
> >>>> Datum:
> >>>>
> >>>> 03.12.2009 09:06
> >>>>
> >>>> Betreff:
> >>>>
> >>>> 7: Timeout occurred while trying to connect to server
> >>>>
> >>>> Gesendet von:
> >>>>
> >>>> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> >>>>
> >>>> Thomas, to better clarify my application it m makes a request to the
> web
> >>>> service by passing the host name of an image and must receive the
> stream
> >>> of
> >>>> the image to be displayed on the browser
> >>>> While I am on first use of this tool, but I expect that the function
> >>>> retriveDDTObjectResponse, contains this stream of return and that I
can
> >>> open
> >>>> the image as if it had any link .. here is where does the limit I
> >>> mentioned
> >>>> that I could be 64K.
> >>>> This is the procedure or must return an attachment, stored on IFS
and
> >>> then
> >>>> display it
> >>>> someone can clarify this fact,
> >>>> thanks for your availability,
> >>>> Ermanno.
> >>>> B&R Informatica Sas
> >>>> Tel. +39 075602254
> >>>> Cel. +39 337 600839
> >>>> info@xxxxxxxxxxxxxxxxx <mailto:info@xxxxxxxxxxxxxxxxx>
> >>>> www.br-informatica.it <http://www.br-informatica.it>
> >>>>
> >>>> "ATTENZIONE:le informazioni contenute in questo messaggio sono da
> >>>> considerarsi confidenziali ed il loro utilizzo
> >>>>
> >>>> è riservato unicamente al destinatario sopra indicato. Chi dovesse
> >>> ricevere
> >>>> questo messaggio per errore è tenuto ad
> >>>>
> >>>> informare il mittente ed a rimuoverlo definitivamente da ogni
supporto
> >>>> elettronico o cartaceo."
> >>>>
> >>>>
> >>>>
> >>>> i Thomas,I changed the value localhost with 192.168 .... exposed the
> >>> problem
> >>>> was due to a firewall that blocks traffic.
> >>>>
> >>>> Now that I can reach the host comes back to me the following error:
> >>>>
> >>>> The value of the receiver is too small to hold the result.
> >>>>
> >>>> 16: recvchunk: saveproc: Not all data was written
> >>>>
> >>>> -1009: The value of the receiver is too small to contain the result
> >>>>
> >>>> Got an idea on what may be caused?
> >>>>
> >>>> the web service I should return the stream of an image;
> >>>>
> >>>> There are size limitations?
> >>>>
> >>>> Ermanno.
> >>>>
> >>>>
-----------------------------------------------------------------------
> >>>> This is the FTPAPI mailing list. To unsubscribe, please go to:
> >>>> http://www.scottklement.com/mailman/listinfo/ftpapi
> >>>>
-----------------------------------------------------------------------
> >>> --
> >>> IMPORTANT NOTICE:
> >>> This email is confidential, may be legally privileged, and is for the
> >>> intended recipient only. Access, disclosure, copying, distribution,
or
> >>> reliance on any of it by anyone else is prohibited and may be a
criminal
> >>> offence. Please delete if obtained in error and email confirmation to
> the
> >>> sender.
> >>>
-----------------------------------------------------------------------
> >>> This is the FTPAPI mailing list. To unsubscribe, please go to:
> >>> http://www.scottklement.com/mailman/listinfo/ftpapi
> >>>
-----------------------------------------------------------------------
> >>>
> >>> __________ Informazioni da ESET NOD32 Antivirus, versione del
database
> >> delle
> >>> firme digitali 4657 (20091203) __________
> >>>
> >>> Il messaggio è stato controllato da ESET NOD32 Antivirus.
> >>>
> >>> www.nod32.it
> >>>
> >>>
> >>>
> >>>
> >>>
------------------------------------------------------------------------
> >>>
> >>>
-----------------------------------------------------------------------
> >>> This is the FTPAPI mailing list. To unsubscribe, please go to:
> >>> http://www.scottklement.com/mailman/listinfo/ftpapi
> >>>
-----------------------------------------------------------------------
> >>
-----------------------------------------------------------------------
> >> This is the FTPAPI mailing list. To unsubscribe, please go to:
> >> http://www.scottklement.com/mailman/listinfo/ftpapi
> >>
-----------------------------------------------------------------------
> >>
> >> __________ Informazioni da ESET NOD32 Antivirus, versione del database
> > delle
> >> firme digitali 4661 (20091204) __________
> >>
> >> Il messaggio è stato controllato da ESET NOD32 Antivirus.
> >>
> >> www.nod32.it
> >>
> >>
> >>
> >>
> >>
------------------------------------------------------------------------
> >>
> >>
-----------------------------------------------------------------------
> >> This is the FTPAPI mailing list. To unsubscribe, please go to:
> >> http://www.scottklement.com/mailman/listinfo/ftpapi
> >>
-----------------------------------------------------------------------
> > -----------------------------------------------------------------------
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > http://www.scottklement.com/mailman/listinfo/ftpapi
> > -----------------------------------------------------------------------
> >
> > __________ Informazioni da ESET NOD32 Antivirus, versione del database
> delle
> > firme digitali 4665 (20091206) __________
> >
> > Il messaggio è stato controllato da ESET NOD32 Antivirus.
> >
> > www.nod32.it
> >
> >
> >
> > -----------------------------------------------------------------------
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > http://www.scottklement.com/mailman/listinfo/ftpapi
> > -----------------------------------------------------------------------
> >
>
>
>
> __________ Informazioni da ESET NOD32 Antivirus, versione del database
delle
> firme digitali 4669 (20091208) __________
>
> Il messaggio è stato controllato da ESET NOD32 Antivirus.
>
> www.nod32.it
>
>
> -----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> http://www.scottklement.com/mailman/listinfo/ftpapi
> -----------------------------------------------------------------------
>
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a criminal
offence. Please delete if obtained in error and email confirmation to the
sender.
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
__________ Informazioni da ESET NOD32 Antivirus, versione del database delle
firme digitali 4670 (20091208) __________
Il messaggio è stato controllato da ESET NOD32 Antivirus.
www.nod32.it
Attachment:
errore.ppt
Description: Binary data
----------------------------------------------------------------------- This is the FTPAPI mailing list. To unsubscribe, please go to: http://www.scottklement.com/mailman/listinfo/ftpapi -----------------------------------------------------------------------