[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SoapAction Error
Hi Scott,
We corrected the 'www' and used the technique in EXAMPLE20. That got
us past the Soap Action error. Thanks!!!
Now, we can't get anything to display on the screen. We've tried all
the combinations we can think of but the screen only shows 'DSPLY' and
that's all.
We want to eventually display both the objectID and the errorString.
I'm sure it's something simple that we've overlooked.
Thanks for all your help!!
Glenda
From: Scott Klement <sk@xxxxxxxxxxxxxxxx>
To: HTTPAPI and FTPAPI Projects <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
Date: 06/17/2009 11:10 PM
Subject: Re: SoapAction Error
_________________________________________________________________
It looks like the SoapAction in your screen shot is
[1]http://www.multispeak.org/Version_3.0/InitiateDisconnectedStatus
However the one in your debug file is:
[2]http://multispeak.org/Version_3.0/InitiateDisconnectedStatus
I suspect that's the problem... That "www." is missing. Please add
it. If the result is more than 64 characters, use the technique
demonstrated in EXAMPLE20 to enable a longer SoapAction. Good luck
Glenda.Tucker@xxxxxxxx wrote:
> Hi Scott,
> Here's the Soap display. Did we pick up the correct Soap Action?
> [[3]cid:_1_0834E3040834DD40006DCFC6852575D8]
>
> From: Scott Klement <sk@xxxxxxxxxxxxxxxx>
> To: HTTPAPI and FTPAPI Projects
<ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
> Date: 06/17/2009 03:51 PM
> Subject: Re: SoapAction Error
>
_________________________________________________________________
>
> hi Glenda,
> The error message seems to imply that you've provided the wrong
value
> for the SoapAction.
> Please look at the SoapAction property in SoapUI to see what it's
set
> to. To find it, click on the appropriate operation (NOT the
request)
> in
> the navigation tree, then look at the operation properties in the
box
> in
> the lower-left corner of the display.
> Thanks!
>
______________________________________________________________________
> This e-mail has been scanned using Skeptic(tm) technology powered
by
> MessageLabs. For more information contact the SEC IS DEPARTMENT
> TECHNICAL SUPPORT STAFF AT EXT. 378
>
______________________________________________________________________
>
>
>
>
----------------------------------------------------------------------
--
>
>
----------------------------------------------------------------------
-
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> [4]http://www.scottklement.com/mailman/listinfo/ftpapi
>
----------------------------------------------------------------------
-
----------------------------------------------------------------------
-
This is the FTPAPI mailing list. To unsubscribe, please go to:
[5]http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------------
-
______________________________________________________________________
_
This e-mail has been scanned using Skeptic(tm) technology powered by
MessageLabs. For more information contact the SEC IS DEPARTMENT
TECHNICAL SUPPORT STAFF AT EXT. 378
______________________________________________________________________
This e-mail has been scanned using Skeptic(tm) technology powered by
MessageLabs. For more information contact the SEC IS DEPARTMENT
TECHNICAL SUPPORT STAFF AT EXT. 378
______________________________________________________________________
References
1. http://www.multispeak.org/Version_3.0/InitiateDisconnectedStatus
2. http://multispeak.org/Version_3.0/InitiateDisconnectedStatus
3. cid:_1_0834E3040834DD40006DCFC6852575D8
4. http://www.scottklement.com/mailman/listinfo/ftpapi
5. http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------